trabajo con chapas de metal usadas para la venta (3,346)

sheet width: 3100 mmplate thickness: 4.0 mmthickness at Niro-steel: 2.5 mmcutting angle adjustment: 1.0 °back stop - adjustable: 10 - 1000 mmadjustment speed: 180 mm/sdown holder: 21 Stückstrokes per minute: 18 - 31 oil volume: 160 LControl: ELGO P8511 column arm: 200 mmdistance between columns: 3050 mm0: max. 300 barvoltage: 400 Vmain drive: 9.0 kWweight of the machine ca.: 4800 kg.dimensions of the machine ca.: 3660 x 2070 x 2140 mm from a maintenance workshopEquipment:- electro-hydraulic sheet metal shear swing cut- machine frame = all-steel welded construction- ELGO NC control model P8511, control panel at the front left for positioning the electro-motoric rear stop target/actual position value input possible adjustment by three-phase motor via toothed belt- support table with ball rollers there are recessed grips between the table plates- front finger guard- hydraulically acting s ...

press capacity: 28 tx-axis: 2000 mmy-axis: 1000 mmmachine weight ab.: 11000 kgYoutube-Video-Links:https://www.youtube.com/watch?v=LdcmUuj8QnM&ab_c hannel=BaestleinGmbHhttps://www.youtube.com/watch?v=IcEmqxjpnoE&ab_cha nnel=BaestleinGmbHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Shaft diameter: 40 mmbending speed: 10 U/min: 2 x 3,2 bending capacity - angular iron: 50 x 50 x 6 mmtotal power requirement: 1,85 kWweight of the machine ca.: 280 kgdimensions of the machine ca.: 560 x 980 x 1430 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 215 mmshaft diameter: 60 mmShaft revolutions: 6 U/min: 100x2 mm: 80x15 mmpressure hydraulic cylinder: 180 kNtotal power requirement: 2,2 kWweight: 720 kgdimensions: 1200x900x1700 mmAccessories / Equipment:- Three driven rollers- Hydraulic delivery of the upper roller- Working position horizontal and vertical- Digital display with memory function- Bearings with tapered roller bearings- Use of replaceable slide rails on the guide carriage- The standard roller set is included. It can bend various profiles flat iron, T-iron, solid material etc.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 53700 €: 1014.93 €: 2050 mm: 16 mm: 16 mm: 13 mm: 13 mm: 10 mm: 260 mm: 260 mm: 200 mm: 1,5 / 6 m/min: 7.5 kW: 4300 mm: 1600 mm: 1550 mm: 6100 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can be max. 30 % oremust be more than 60 % of roll lengthHardened rolls are r ...

shaft diameter: 60 mmShaft revolutions: 6 U/minroll diameter: 215 mmpressure hydraulic cylinder: 180 kNdimensions: 1125x870x1620 mmweight: 820 kgAccessories / Equipment:- Three driven rollers- Hydraulic delivery of the upper roller- Working position horizontal and vertical- Digital display with memory function- Bearings with tapered roller bearings- Use of replaceable slide rails on the guide carriage- The standard roller set is included. It can bend various profiles flat iron, T-iron, solid material etc.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 49900 €: 953.09 €: 2050 mm: 13 mm: 13 mm: 10 mm: 10 mm: 8 mm: 245 mm: 245 mm: 180 mm: 1,5 / 6 m/min: 7.5 kW: 4300 mm: 1600 mm: 1470 mm: 5450 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can be max. 30 % oremust be more than 60 % of roll lengthHardened rolls are rec ...

plate thickness: max. 5.0 mmtube diameter: 27.9 - 61.0 mmmotor: 400 Volttotal power requirement: 2.2 kWweight of the machine ca.: 87.0 kg.The AL1-2E electric pipe notcher is started at the push of a button, and the pipe notcher is driven continuously. This means you can continue to work on new parts without having to switch the machine on again each time.With the electrically driven AL1-2E pipe notcher you can notch pipe outer diameters of Ø 26.9 (3/4?), Ø 33.7 (1?), Ø 42.4 (1 ¼), Ø 48.3 (1 ½), Ø 60.3 (2?).Do you often notch pipes? Then the electrically driven AL1-2E pipe notcher with the 2.2 kW electric motor is just right for you. The motor forms a unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with 0-voltage protection and a protective cap.Equipment:- electric motor pipe notching machine- for pipes 27.9 - 34 ...

stroke: 70 mmwork height max.: 1094 mmthroat: 500 mm: 40 in 14 mmno. of strokes: 20 Hub/minthroat: 500 mm: 80 toengine output: 9 kWrange L-W-H: 1980x1150x2000 mmweight: 2000 kgAccessories / equipment:- punching tableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 16 mmpre-bending: 13 mmupper roll diameter: 330 mmlower roll diameter: 300 mmside roll diameter: 240 mmControl: total power requirement: 11 kWOverall size: 5600x1650x1900 mmweight of the machine ca.: 10.600 kgAccessories / equipment:- Conical bending device- induction hardened rolls- digital display for side rollers- Machine made of steel construction- Separate control panel- two speeds- all rollers on ball bearings- Folding and support bearing from the top roller is actuated from the control panel.When the folding bearing is opened, the roller moves automatically upwards.- Conical adjustment of the rollers via control panel- Central rollers are via hydraulic motor and rotary reduction geardriven. (Top and bottom rollers)- CalibrationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 60600 €: 1145.34 €: 3100 mm: 10 mm: 10 mm: 8 mm: 8 mm: 6 mm: 260 mm: 260 mm: 200 mm: 1,5 / 6 m/min: 7.5 kW: 5350 mm: 1600 mm: 1550 mm: 7685 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can be max. 30 % oremust be more than 60 % of roll lengthHardened rolls are reco ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 62600 €: 1183.14 €: 2050 mm: 13 mm: 10 mm: 13 mm: 10 mm: 10 mm: 8 mm: 240 mm: 240 mm: 190 mm: 820 mm: 11 kW: 3830 mm: 1160 mm: 1200 mm: 5000 kg4 rollsfully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear boxhydr. side rolls positioning with electronical synchronisationhydr. lower roll feed with mechanical synchronisationadjustable pinching pressurevariable rolling speedhardened rollsconical bending devicehydraulic drop-end bearingmoveable control paneloverload protectionuser manual in GERMAN or ENGLISHaccording to CE rulesOPTIONAL:NC controlupper and lateral supportsIMPORTANT ISSUES AT CONICAL BENDING:the max. sheet metal thickness isequivalent to 50 % of nominal capacityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 110 t: Ø 40x20 mm throat: 500 mmengine output: 9 kWno. of strokes: 28 Hub/minstroke max.: 80 mmweight: 3150 kgAccessories / equipment:- punching tableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2100 mmplate thickness: 5 mmpre-bending: 5 mmupper roll diameter: 170 mmmin. bending diameter: Ø 255 mmbending speed: 4,5 m/mintotal power requirement: 4 kWweight of the machine ca.: 2300 kgdimensions of the machine ca.: 3800x1100x1130 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 13,0 mmpre-bending: 10,0 mmdiameter of upper rolls: 300 mmside roll diameter: 210 mmdiameter of lower rolls: 270 mmtotal power requirement: 11,0 kWFurnishing:- electro-hydraulic 4-roller bending machine- 2x driven main rollers (upper & lower roller)- with hydraulic conical bending device- Induction hardened rollers- including straightening function for welded pipes- Control unit / display with touch screen function digital position display for the two side rollers- mobile control panel- 2x bending speeds selectable- hydraulic folding bearing- Safety device (safety line with switch unit)- Pressure gauge / pressure indicator for the rollers- CE mark + declaration of conformity- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 6 mmpre-bending: 4 mmupper roll diameter: 210 mmlower roll diameter: 190 mmside roll diameter: 170 mmtotal power requirement: 7,5 kWOverall size: 5200x1400x1300 mmmachine weight ab.: 5.400 kgAccessories / equipment:- Conical bending device- induction hardened rolls- digital display for side rollers- Machine made of steel construction- Separate control panel- two speeds- all rollers on ball bearings- Folding and support bearing from the top roller is actuated from the control panel.When the folding bearing is opened, the roller moves automatically upwards.- Conical adjustment of the rollers via control panel- Central rollers are via hydraulic motor and rotary reduction geardriven. (Top and bottom rollers)- CalibrationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 55900 €: 1056.51 €: 3100 mm: 9 mm: 8 mm: 7 mm: 7 mm: 5 mm: 245 mm: 245 mm: 180 mm: 1,5 / 6 m/min: 7.5 kW: 5350 mm: 1600 mm: 1470 mm: 6850 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can be max. 30 % oremust be more than 60 % of roll lengthHardened rolls are recomm ...

round bar steel: 45 mmsquare edge steel: 45 mmL-beam: 12 mm: 40 flat steel: 450x15 mmL-beam 90°: 152x152x13 mm: 45 mmsquare edge steel: 45 mm: 12 mmweight of the machine ca.: 2323 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2100 mmplate thickness: 8 mmpre-bending: 6 mmupper roll diameter: 190 mmlower roll diameter: 170 mmside roll diameter: 150 mmtotal power requirement: 3 kWweight of the machine ca.: 3.450 kgMachine dimensions approx.: 4040x1380x1255 mmAccessories / equipment:- Conical bending device- induction hardened rolls- digital display for side rollers- Machine made of steel construction- Separate control panel- two speeds- all rollers on ball bearings- Folding and support bearing from the top roller is actuated from the control panel.When the folding bearing is opened, the roller moves automatically upwards.- Conical adjustment of the rollers via control panel- Central rollers are via hydraulic motor and rotary reduction geardriven. (Top and bottom rollers)- CalibrationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 1 Bending tools with excellent value for moneyInduction hardened, with ground working surfacesStandard lengths: 835 mm, 415 mm and 835 mm (split).For tool clamping systems such as: Amada, Promecam, Euro, Durma, Baykal, Ermaksan, Dener and many moreThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2600 mmplate thickness: 10,0 mmpre-bending: 8,0 mmdiameter of upper rolls: 230 mmside roll diameter: 190 mmdiameter of lower rolls: 210 mmtotal power requirement: 7,5 kWweight of the machine ca.: 5.560 kg.range L-W-H: 4.650x1.380x1.300 mmFurnishing:- electro-hydraulic 4-roller bending machine- 2x driven main rollers (upper & lower roller)- with hydraulic conical bending device- Induction hardened rollers- including straightening function for welded pipes- Control unit / display with touch screen function digital position display for the two side rollers- mobile control panel- 2x bending speeds selectable- hydraulic folding bearing- Safety device (safety line with switch unit)- Pressure gauge / pressure indicator for the rollers- CE mark + declaration of conformity- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 25 mmpre-bending: 20 mmupper roll diameter: 390 mmlower roll diameter: 360 mmside roll diameter: 300 mmtotal power requirement: 18,5 kWweight of the machine ca.: 17.100 kgMachine dimensions approx.: 5800x2100x2000 mmAccessories / equipment:- Conical bending device- induction hardened rolls- digital display for side rollers- Machine made of steel construction- Separate control panel- two speeds- all rollers on ball bearings- Folding and support bearing from the top roller is actuated from the control panel.When the folding bearing is opened, the roller moves automatically upwards.- Conical adjustment of the rollers via control panel- Central rollers are via hydraulic motor and rotary reduction geardriven. (Top and bottom rollers)- CalibrationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 55 thole diameter in sheet thickness: Ø 40 in 10 mmthroat: 750 mmstroke: 60 mm: 38 Hub/minengine output: 5 kWweight of the machine ca.: 1.885 kgOverall size: 1500x1100x2000 mmAccessories / equipment:- punching tableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 25000 €: 480 €: 2050 mm: 6 mm: 30 1/min: 2.3 °: 750 mm: 7.5 kW: 800 mm: 530 mm: 2355 mm: 2720 mm: 1630 mm: 1230 mm: 3200 kgThe machines feature a robust, welded steel frame for maximum cutting precisionMotorized back gauge 750 mm, ball screw spindles, NC control2 cutting edges on the upper blade and 4 cutting edges on the lower blade1000 mm squaring arm with scale, T-slot, and flip stop2 support armsMechanical downholderManual cutting gap adjustment on the frontBalls in the tableCutting line illuminationFoot pedalEmergency stop buttonOperating manual with EC declaration of conformity.INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT:Blades suitable for cutting stainless steelRear light barrier protectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 62400 €: 1179.36 €: 4100 mm: 6 mm: 4 mm: 50 mm: 12 1/min: 1.5 °: 20 : 17 to: 1000 mm: 200 mm/s: 15 kW: 200 l: 3 Stk.: 865 mm: 580 mm: 4510 mm: 5230 mm: 2300 mm: 3600 mm: 2150 mm: 11460 kgSwing cut constructionNC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB portMotorized back gauge 1000 mm on ball screws, folding upwardsClear control panel mounted on moveablearmHydraulic hold down pistons are arrangedclose to the cutting edgeFoot switchCentral, manual blade gap adjustmentCutting line illuminationBroad table with ballsPiece counterSingle and continous stokeFold up finger guard 1.000 mm1 squaring arm 1. 500 mm with scale,T-slot and tilting cam2 supporting arms 1.000 mm with T-slotSimple replacement and grinding of thebladesVariable adjustable cuttinglength for economic processingLower blade f ...

: 60x3 mm: 60x3 mm: 35 mm: 64x4 mm: max. 210 °: R10-R300 bending speed: 1,25/2,5 U/mintotal power requirement: 1,5 kWweight of the machine ca.: 130 kgdimensions of the machine ca.: 595x363x900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 63x4,2 mmexternal diameter: min. Ø 5 mmbending radius min.: 10 mmbending radius max.: 270 mmBending Angle: max. 210 °bending device: gegen Uhrzeigersinn total power requirement: 0,75 kWweight of the machine ca.: 130 kgdimensions of the machine ca.: 740x470x1030 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 tchamfer lenght: 3100 mmdistance between columns: 2600 mmcolumn arm: 250 mmram stroke speed: 90.0 mm/secwork speed: 7.5 mm/secreturn speed: 80.0 mm/secwork stroke: 160 mmdayligth: 395 mmtable height: 900 mmback stop - adjustable: max. 800 mmoil volume: 200 ltr.voltage: 400 Volttotal power requirement: 11.0 kWweight: 7524 kgrange L-W-H: 4250 x 1900 x 2550 mmFurnishing:- DELEM CNC control model DA-66T graphic/touch screen 2D graphical programming 17 TFT color screen with high resolution Bending sequence calculation Product programming and real size display USB interface intuitive, graphical entry of profiles Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation Radius programming Graphic tool and product library Collision monitoring 3D visualization 1 ...

I-beam section - upend: 100 x 20 (d 2100) mmtube diameter max.: 100 x 3 (d 3000) mmL-beam: 80 x 80 x 8 (d 2000) mmsquare material: 50 x 25 x 2 (d 600) mmbar material - diameter: 60,0 (d 1000) mmI-beam section - flat steel: 120 x 30 (d 600) max. 140 mmtool taper: 80,0 turning speeds: 4,2 U/minweight: 1600 kgdimensions: 1240 x 1375 x 1540 mmDomestic equipments:- Welded steel structure (St-52)- Rollers are driven by 3 separate hydraulic motors- Stepless speed- Special steel gears- Shafts are made of special steel, hardened and ground- Manual lubrication- Guide rollers are hydraulically adjustable- Lower rollers are hydraulically movable up and down- Infinitely adjustable speed of the lower rollers, move afterbelow and above- Digital display for lower rollers- Separate and movable control panel- Horizontal and vertical operation- Production quality certified according to CE, ISO 9001 - 2015, ...