tornos usadas para venda (3,072)

turning diameter: 720 mmturning length: 3.000 mmcontrol: FAGOR 8055 TC/B turning diameter over bed: 470 mmspindle bore: 92 mmspindle nose: DIN-55027-11 spindle diameter: 150 mmspindle drive: 17 / 20,5 kWtotal power requirement: 28 kWweight of the machine ca.: 5,7 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 210 mm, 305 mm, 5000 1/min

Torno CNC Marca: Gildemeister Modelo: CTX 200 Controle: Heidenhain Pilot 1190 Ano de fabrico 1996 Horas de ligação: aprox. 38.000 h Especificações Diâmetro circunferencial sobre o leito 440 mm Diâmetro circunferencial sobre a carruagem 210 mm Comprimento de giro 305 mm Passagem da barra 42 mm Velocidade 5000 rpm Torreta 12 estações Suporte para ferramentas 20 VDI Dimensões da máquina: L x W x H 2800 x 1651 x 1771 mm Peso da máquina aprox. 3000 kg Acessórios: Vários porta-ferramentas Mandril de collet no eixo principal Tailstock Documentação

Ano de construção 2019 Controlo Celos com Siemens 840D sl Operar incluindo 21.5 ERGOline Control Viagens Eixo X: 490 mm Eixo Y: 250 mm Eixo Z: 1.300 mm Eixo B:+120 a -120 Diâmetro máximo de giro 500 milímetros Comprimento máximo de giro 1.200 milímetros Eixo principal ISM102 Potência de acionamento: 37/28 kW Binário máximo: 700/800 Nm Velocidade máxima do eixo: 4.000 rpm Passagem máxima da barra: 104 mm Sub-eixo ISM52 Potência de acionamento: 14,5 kW Velocidade máxima do eixo: 6.000 rpm Fuso de fresagem Potência de acionamento: 22 kW Velocidade máxima do eixo 12.000 rpm HSK-63A DIN69893 Revista de ferramentas 80 posições de ferramentas Outro equipamento Interface para robôs Balanças de vidro nos eixos X, Y e Z MP 1.0 – Controlo de Proteção de Máquinas Sondas de ferramentas Sonda de peça, BLUM TC60 Classific ...

Key data: 660 mm, 1495 mm

Matriz de Mazatrol Diâmetro Rotativo Máximo 660 milímetros Comprimento máximo de giro 1.495 milímetros Viagens Eixo X: 580 mm Eixo Y: 150 mm Eixo Z: 1.545 mm Eixo W: 1.490 mm Eixo B -30 a 210 Travessia rápida X/Y/Z/W 50/40/50/30 m/min Eixo principal Potência de acionamento: 22 kW Velocidade máxima do eixo 4.600 rpm Eixo C Passagem máxima da barra: 65 mm Sub-eixo Potência de acionamento: 18,5 kW Velocidade máxima do eixo 5.000 rpm Eixo C Fuso de fresagem Potência de acionamento: 18,5 kW Velocidade máxima do eixo: 12.000 rpm Eixo B: 0,0001 Capto C6 Revista de ferramentas / ATC 120 posições de ferramentas Diâmetro máximo da ferramenta: 90/125 mm Comprimento máximo da ferramenta: 300 mm Peso máximo da ferramenta: 10 kg Torreta inferior Torreta de tambor 9 estações de ferramentas 6 estações de ferramentas motorizadas  ...

Key data: 750 mm, 1524 mm

Controlo Matriz de Mazatrol Diâmetro Rotativo Máximo 760 milímetros Comprimento máximo de giro 1.524 milímetros Viagens Eixo X: 630 mm Eixo Y: 230 mm Eixo Z: 1.585 mm Eixo W: 1.530 mm Eixo B -30 a 210 Travessia rápida X/Y/Z/W 50/40/50/30 m/min Eixo principal Potência de acionamento: 30 kW Velocidade máxima do eixo 3.300 rpm Eixo C Passagem máxima da barra: 102 mm Sub-eixo Potência de acionamento: 26kW Velocidade máxima do eixo 4.000 rpm Eixo C Fuso de fresagem Potência de acionamento: 18,5 kW Velocidade máxima do eixo: 12.000 rpm Eixo B: 0,0001 Capto C6 Revista de ferramentas / ATC 80 posições de ferramentas Diâmetro máximo da ferramenta: 90/125 mm Comprimento máximo da ferramenta: 400 mm Peso máximo da ferramenta: 10 kg Equipamento especial Arrefecimento pelo eixo Bomba de alta pressão 70 bar 20 l/min. PLC com 7  ...

turning diameter over bed: 1800 mmturning diameter over slide rest: 1450 mmturning length: 940 mmbed width: 1040 mmturning speeds: 2,35-118 U/minfaceplate diameter: 1400 mmturning dia. in gap: 2450 mmTravel: 1200 mmDistance between the canter 7000mmFaceplate diameter 1400urning diameter in the offset 2450, length 940 mmTravel over support 1200Over support with autom. travelThe tech. Data are manufacturer or operatorinformation and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward ...

turning diameter: 325 mmturning length: 1000 mmswing diameter over bed slide: 250 mmSwingdiameter in the bed bridge: 440 mmreus: 12 (85-2000) U/mintail stock: MK 3 quill stroke: 100 mmdiameter of quill: 40 mmspindle taper: DIN 55027 Nr. 5 spindle bore: 32 mmfeed: längs 0,006 - 1,77 m/minfeed: quer 0,003 - 0,885 m/mintotal power requirement: 2,2 kWweight of the machine ca.: 770 kgdimensions of the machine ca.: 2150 x 950 x 1350 mmFurnishing:- Cooling device- Machine light- chip rear wall- Spindle protection- Lathe chuck protection- Tool holder protection- Foot pedal with braking function CE- Interchangeable gearsincl. Optional equipment- 3-jaw chuck Ø 160 mm type 3204/ DIN6350, BISON- MULTIFIX quick-change holder type A, incl. 4 tool holders- 2-axis digital display DRO NewallThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 660 mmturning length: 1500 mmcontrol: FAGOR centre height: 330 mmspindle passage: 82 mmnumber of spindle speeds: 30-2000 U/minbed width: 390 mmrapid speed: X/Z 4 - 8 m/mintailstock quill diameter: 75 mmMain spindle capacity: 15 kWweight of the machine ca.: 3200 kgdimensions of the machine ca.: 3800 x 1800 x 2150 mFirst commissioned in 2015, very good condition- FANUC Series 18i TB Control, Manual Guide i Function- Central control panel for machine and CNC control on the pedal arm 45 ° swiveling- 12-fold tool turret- Fanuc drive with 30 kW (50% ED)- Chip conveyor- Bezel- 3 jaw chucksThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 420 mmturning length: 1500 mmswing diameter over bed slide: 250 mmSwingdiameter in the bed bridge: 590 mmcentre height: 210 mmTurning length in the bed bridge: 260 mmreus: 16 (45-1800) U/mintail stock: MK 4 quill stroke: 120 mmdiameter of quill: 50 mmspindle taper: DIN ISO 702-2 Nr. 6 spindle bore: 52 mmspindle cone: MK 6 feed: längs 17 / 0,05 - 1,7 m/minfeed: plan 17 / 0,025 - 0,85 m/mintotal power requirement: 4,6 kWweight of the machine ca.: 1340 kgdimensions of the machine ca.: 2440 x 915 x 1375 mmFully equipped master and feed spindle lathes. TH 4215 withdigital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway- Spindle mount Camlock DIN ISO 702-2 No. 6- Precisely crafted slide- Hand wheels with adjustable fine scaling 0.04 / 0.02 mm- Quadruple steel holder- All guides can be adjusted using V-ledges- Adjustment range top slide ± 90°- Guar ...

diâmetro de giro: 400 mmcomprimento de giro: 600 mmcontrole: Turn Plus CNC Pilot 3190 requisito de potência total: 44 kVApeso da máquina ca.: 5 tdimensões da máquina ca.: 6 2,5 2 mA máquina tem estado em uso até agora (giro de 2 eixos)Defeitos conhecidos:- Ferramentas acionadas sem função- Vazamento de estoque traseiro - fora de serviço- Problemas esporádicos hidráulicos / vazamentos

turning diameter: 760 mmturning length: 3000 mmswing diameter over bed slide: 520 mmcentre height: 380 mmreus: 17 (7,5 - 1015) U/mintail stock: MK6 quill stroke: 225 mmdiameter of quill: 105 mmspindle bore: 132 mmfeed: längs 0,039 - 18 mm/minfeed: quer 0,02 - 9 mm/mintotal power requirement: 15 kWweight of the machine ca.: 4700 kgdimensions of the machine ca.: 4900 x 1650 x 1650 mm- Coolant device- Machine light- Chip back wall- Spindle protection- Lathe chuck protection- Tool holder protection- Interchangeable gearsSpecial equipment- 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON- MULTIFIX quick-change holder type B, including 4 tool holders- 3-axis digital display DRO Newall- Foot pedal with brake function CEThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 380 mmturning diameter over slide rest: 190 mmturning length: 1000 mmtotal power requirement: 7,5 kWweight of the machine ca.: 1,7 tdimensions of the machine ca.: 2,511,5 mNo. 52911 used lead and feed spindle lathe WEILER Commodor 75 GSworking range: Ø 380/190 x 1000 mmdrive: 7,5 kWdigital displayspindle bore 56 mmSpeed range 13 - 2000 min-13-jaw chuckMultifix BChip traydocumentationSpace requirement approx. 2.5 x 1 x 1.5Weight approx. 1700 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Controle Fanuc 21T Diâmetro de giro 158 mm Diâmetro circunferencial sobre a cama 340 mm Velocidade 6.000 min-1 Revólver de 8 velocidades Tailstock Chuck de 3 mandíbulas, Chuck de 2 mandíbulas, Chuck de collet Collets Porta-ferramentas versáteis

A Gildemeister CNC double-spindle turning and milling center including coolant system and chip conveyor is available. Turning diameter over bed: 640mm, machining diameter: 400mm, center distance: 1930mm, travel X/Z: 550mm/1585mm, travel Y: +/-110mm, B-axis: +/-120° (interpolating), C-axis: 360°. Main spindle: power: 36kW/45kW, speed: 4000rpm, torque: 600Nm-730Nm, bore: 107mm. Milling spindle: Speed: 12000rpm, power: 13.2kW/22kW, torque: 100Nm. Tool places: 60, carrier: turret 12-fold star SW 380, machine dimensions X/Y/Z: approx. 9300mm/4600mm/3100mm, weight: approx. 20000kg, control: Siemens Sinumerik 840D powerline. Documentation available. On-site inspection is possible.

Três tornos horizontais Okuma CNC estão disponíveis. 1) Okuma LB 15 M. 2) Okuma LB 15. 3) Okuma LB 15 W. O Okuma LB 15 W está defeituoso. É possível uma inspeção no local. Venda individual possível.

turning diameter over bed: 420 mmturning diameter over slide rest: 290 mmturning length: 900 mmturning diameter in the gap: mmturning speeds: 40 - 2000 U/mincentre height: 210 mmspindle bore: 38 mmtotal power requirement: 4,0 KWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 2,4 x 1,1 x 1,3 mLead and feed spindle lathe- 3-jaw chuck 220mm- Quick-change tool holder with 5 cassettes- Steady rest- Chip tray- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: Aufnahmen Divers K50 Diâmetro: 50 mm:

: . Distância central: 3000 mmDiâmetro máximo de oscilação: 660 mmMultifix: . estável: 2 Stück peso da máquina ca.: 5 t: KW 39/2022

turning diameter over bed: 820 mmturning diameter over slide rest: 600 mmturning length: 5000 mmfaceplate: 750 mmspindle passage: 125 mmturning speeds: 9-450 U/minRapid travel: steady for max. workpiece diameter from: 520 mmsteady for max. workpiece diameter from: 330 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mNo. 59The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to you ...

serial number: 31302 control: Fanuc with double spindles: x turning diameter: max. 600 mmx-travel: 1000 mmwith magazine: x extensive accessories: ca. 100 Aufnahmen, auch angetriebenweight of the machine ca.: 13 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2800 mmswing diameter: 3200 mmturning height: 1500 mmslide adjustment: 1200 mmturning speeds: 50 U/minControl: Sienens 840 Dside head - cross travel: 900 mmpower capacity: 55 kW: workpiece weight: 16 ttotal power requirement: kWweight of the machine ca.: 50 tdimensions of the machine ca.: mThe engine was rebuilt in 2008/2009 to CNC control Siemens 840 D.The right support is operated CNC and the face plate. The left side of the support and assistance are conventional. Acu Rite Digital DisplayThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, produc ...

faceplate diameter: 2500 mmswing diameter: 2865 mmturning height: 3000 mmControl: R & D type: MTC 4 Rest: 2 slide adjustment: 1500 mmturning speeds: 140 U/mintool change unit: 12 Pos.total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMachine is modernizedThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with Modul ...

turning diameter over bed: 50 mmspindle passage: 26 mmturning length: 275 mmtotal power requirement: 12 kWweight of the machine ca.: 4500 kgCNC-Sliding Headstock Lathe, Opposite HeadstockThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1600 mmswing diameter: 2100 mmturning height: 1700 mmControl: R & D type: MTC 4 turning speeds: 280 U/minworkpiece weight: 20000 kgTool changer: 14 Pos.: total power requirement: kWweight of the machine ca.: 2800 tdimensions of the machine ca.: 3,7x3,75x5,1 mMachine is modernizedThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created wi ...

turning diameter: 570 mmturning length: 2000 mmcontrol: total power requirement: 15 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1250 mmswing diameter: 1500 mmturning height: 1250 mmControl: Siemens type: 840 Dsl tool taper: 4 Pos.total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe machine was overhauled in 2015 by Matuschek.Siemens 840 DSL Shop TurnThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the ...

turning diameter over bed: 920 mmturning diameter over slide rest: 720 mmturning length: 4000 mmturning speeds: 1,4-280 U/mindigital readout: Acurite : steady: 640 steady: 500 faceplate: 900 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the s ...

turning diameter: 570 mmturning length: 2000 mmcontrol: Siemens Sinumeric steady: chip conveyor: turning dia. in gap: 600 mmturning diameter over slide: 340 mmspindle bore: 63 mmTool changer: total power requirement: 22 kWweight of the machine ca.: 4,5 tdimensions of the machine ca.: 3,5x1,5x1,5 mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ...

: : VDI 20 : number: 3 Stück im Paket : Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: 840 C control: 2x 840 D : Kühlmittelsystem chip conveyor: ja kWgenerator - rated current: 95,00 Aconnected load: 65,00 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.