trabalho de chapa metálica usadas para venda (3,344)

Machine ready for transport Auction-ID: A1-48649-8

Tube bending machine including molds Capacity up to 1 ton Auction-ID: A3-46152-19418

Joint/punching tool machining and sharpening machine, with Lenze DISCO variable speed drive, 0.37 kW, variable speed. Auction-ID: A1-49723-20

Specifications: model B-500, 230 V, 1,400 W, 6.5 A, 950 rpm, 50/60 Hz. Auction-ID: A1-41279-420

equipped with 5x hydraulic jack; including hydraulic unit; foot control; mounted on profile steel frame; bending table size 1100x900x1100 mm; transport dimensions approximately 1600x900x1300 mm; Auction-ID: A1-49001-20

Includes various accessories. Auction-ID: A1-41279-408

mounted on profile steel frame; including hydraulic unit; including accessories; Auction-ID: A1-49001-51

Extension: 580mm, including punching tools Auction-ID: A1-49001-12

Includes various accessories. Auction-ID: A1-41279-418

Auction-ID: A1-48474-93

Cold bending: flat steel 100 x 5 mm, square steel 16 x 16 mm, round steel 18 mm, angle steel 60 x 8 mm - Hot bending: flat steel 100 x 15 mm, square steel 30 x 30 mm, round steel 30 mm, angle steel 100 x 12 mm, equipped with eccentric quick-clamping device, readable bending angle up to 120 degrees, angle stop, lever and bending templates, material stop, delivered in original packaging Auction-ID: A1-48552-139

sheet width: 1020 mmplate thickness: 2,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 0,40 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

RFA Wila hydraulic clamping beam Only 2 years of service Cover plate has been damaged during installation of clamping beam Auction-ID: A3-46147-10001

x-travel: 1200 mmy-travel: 600 mmz-travel: 600 mmControl: Heidenhain iTNC 530 spindle speed:: 6000 1/min.spindle taper: CAT-50 ISOspindle drive: (S1) 10 kWtable surface area: 1300 x 600 mmtable load: 1200 kgfeed speeds: 1-10000 mm/minrapid travel x/y/z: 20/20/15 m/mindistance table - lower edge spindle: 125-725 mmtotal power requirement: 25 kVAweight of the machine ca.: 7,5 tdimensions of machine: 3600 x 2300 x 3000 mmEquipped with: CNC control Heidenhain iTNC 530 Electr. portable handwheel Spindle oil cooler Tool changer 24-pos., double arm changer- Max. tool diameter 80/150 mm- Max. tool length 250 mm- Max. tool weight 8 kg Preparation for hydraulic machine vice Preparation for 3-D measuring probes Chip conveyor Coolant system, coolant through spindle 20 bar Machine documentationWorking hours (date 29. July 2026):- Control on: 60.822 h- Machine on: 59.602 h- Program cycle: 22.283 h- Sp ...

Automatic CNC peddinghaus punch with forklift control available if required Auction-ID: A3-46147-19021

RFA Wila hydraulic clamping beam Only 2 years of service Cover plate has been damaged during installation of clamping beam Auction-ID: A3-46147-10002

Handle material: Chromed steel Bending head material: Aluminum For copper and aluminum tubes: This pipe bender is suitable for both copper and aluminum tubes, making it versatile. Precise bending up to 180 degrees: Thanks to the degree distribution, you can perform any bend to the degree. For pipes with a diameter of 8-10-12 mm: Suitable for different pipe diameters, so you only need one tool for multiple jobs. Rubber handle: For extra comfort while working, even after a long working day. Length: 340 mm Width: about 48 mm Auction-ID: A1-40896-332

Handle material: Chromed steel Bending head material: Aluminum For copper and aluminum tubes: This pipe bender is suitable for both copper and aluminum tubes, making it versatile. Precise bending up to 180 degrees: Thanks to the degree distribution, you can perform any bend to the degree. For pipes with a diameter of 8-10-12 mm: Suitable for different pipe diameters, so you only need one tool for multiple jobs. Rubber handle: For extra comfort while working, even after a long working day. Length: 340 mm Width: about 48 mm Auction-ID: A1-40896-60

Forklift available for loading Auction-ID: A3-46147-19022

cutting length: 2500 mmplate thickness: 3 mmdistance between columns: 2050 mmblade length: 2650 mmtotal power requirement: 3 kWweight of the machine ca.: 2,5 t- The scissors are equipped with an adjustable stop on the back. stop. Each side is equipped with a millimetre counter, so that the guarantee that the cuts are true to size.- Spring-loaded automatic hold-downs prevent the material from shifting during the cutting process. material during the cutting process.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 6080 mmplate thickness: 6.0 mmrear stop: 1000 mmcutting angle: 0.5 - 2.0 °down holder: 29 Stkno. of strokes: ca. 10 Hub/mintotal power requirement: 22.0 kWdimensions of the machine ca.: 7300 x 2150 x 2750 mmweight: 25500 kg Current list price: approx. 150.000 eurosFeatures:- Electro-hydraulic, slide-guided sheet metal shear- Electro-hydraulic cutting angle adjustment- Electro-hydraulic cutting gap adjustment- Electrically driven backgauge with ball screws- Manual central lubrication- Cut line illumination- Ball bearings in the table- Fold-up finger guard, 1.000 mm- Side stop with T-slots, tilting stop, and scale- 5 support arms with T-slots- Photoelectric sensors on the rear of the machine- 1 freely movable foot switch Includes optional equipment:- Pneumatic sheet metal holding deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

According to photos, weight estimated Auction-ID: A1-48554-156

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for pipes from 0.5 to 50 mm, never used 0 hours and packed in a wooden crate Overall dimensions: 1000 x 1000 x 1400 mm Weight: 310 kg Auction-ID: A7-49514-228

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for 0 pipes. 5 to 50 mm, never used 0 hours, packed in wooden crate Overall dimensions: 1000 x 1000 x 1400 mm Weight: 310 kg Auction-ID: A7-49514-26

With accessories Auction-ID: A1-49382-24

Auction-ID: A1-49382-14

material width: 1500 mmmaterial thickness: 3,00 mmno. of straightening rolls: 23 between stands ca.: 1530 mmthickness min. approx.: 0,50 mmdiam. of the rolls ca.: 47 mmstraight. speed ca.: 0-18 m/ minbarrel length ca.: 1560 mmrun-in height: 1150 mmtotal power requirement: 23 kWweight of the machine ca.: 9,00 tdimensions of the machine ca.: 4,30 x 1,80 x 2,60 mSpecifications:- Max. vertical roll gap: 20 mm (Note: scale only goes up to 15 mm)- Lower support assembly: 5-point configuration with support rollers (individually adjustable)- Upper support assembly: 5-point configuration with support rollers- Bottom roll crowning- Circulating lubrication system for gearbox and drive shafts- Infeed table included- Reversible operation- Centralized grease lubrication for leveling roll bearings- MITSUBISHI ELECTRIC frequency converter (Type A800)- 22 kW drive motor- Drive motor features simple On/Of ...

: neu : ca. 12 - 14 Wochen ab Auf : Italien : 38900 €: 742.99 €: 64 mm: 4000 mm: 950 mm: 1250 mm: 850 kg: 10 cm³: 64 x 3,3 mm: 2 mm: 60,3 x 2,2 mm: 60 x 60 x 2 mm: 40 x 60 x 4 mm: 60 x 40 x 3 mm: 76 mm: 200 mm: 20 mm: 210 °: 4.2 kW: 15 lwith mandrel 3 m lengthFST closure system (Patented) with auxiliary system for stabilizing the hydraulic pressure of the slideProgrammable C-axis bendingPositioning of the 2-axis manual spindle carriage (Y1=Feed and B=Rotation) with high resolution encoder and standard adjustable mechanical stopsMultifunction control keyboard integrated in the machine body with microprocessor control with multifunctional menu30 programs of 9 bends each can be memorizedScreen for digital display for carriage feed (Y1 Axis) and rotation (B Axis)External pressure gauges for easy setting of the system and closing pressureVariable bending speed up to 4 rpm (Inverter vers ...

: neu : ca. 8 Wochen ab Auftragse : Spanien : 11500 €: 220.8 €: 1 : 55 to: 500 mm: 40 x 10 mm: 37 1/min: 5 kW: 1550 mm: 1200 mm: 1950 mm: 1150 kghydraulic drivetable with gaugeuser manual in GERMAN and ENGLISHCNC options on requestWe have a big stock of punches and dies for immediate dispatchWE HAVE MORE THAN 700 REFERENCES!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.