trabalho de chapa metálica usadas para venda (3,258)

sheet width: 2050 mmplate thickness: 3.0 mmdistance between columns: 2100 mmback stop - adjustable: 550 mmno. of strokes: 35 Hub/mincutting angle: 2°12 table width: 400 mmtable height: 850 mmControl: konv. total power requirement: 3.0 kWweight of the machine ca.: 1280 kgdimensions of the machine ca.: 2400 x 1500 x 1300 mm Current list price: approx. 20.000 euros From a maintenance workshop Features:- Robust / high-performance electromechanical guillotine shear- Manual material backgauge Continuously adjustable range Adjustment from the back via handwheel Includes mm scale Max. adjustment range: 550 mm - Manual cutting gap adjustment, from the front- 1x side stop with mm scale- 2x support arms- 1x freely movable foot switch- rear sheet metal chute- rear safety device (light barrier)- operating instructions (machine control system)- Transport stand (homemade)The data for this ad was  ...

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 6400 mm: 1.25 mm: 2 mm: 1.5 - 2 mm: 4 : 4 : 1000 mmfully automatic bending in two ways without the need to rotate the sheethydraulic driveBMS MULTI-Touch with automatic depth stoppowered rotary shearadditional rail on the bending beammaterial support2x foot pedalsafety equipment accoring to the control rules BG Germany3 year warranty on stands and tension arms.Quality Made in Germany.FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment)the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles andnarrow/wide bendings for easy intermateing price on request Fully automatic g ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm: 28 mm: 28 mm: 22 mm: 26 mm: 23 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movemen ...

chamfer lenght: 1530 mmplate thickness: mmdistance between columns: 1530 mmpressure: 40 tstroke length max.: 300 mmtravel -x axis: 500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

chamfer lenght: 3020 mmplate thickness: mmdistance between columns: 2555 mmpressure: 220 tstroke length max.: 350 mmtravel -x axis: 750 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 6700 €: 129.31 €: 1270 mm: 2.5 mm: 90 mm: 6 m/min: 1.1 kW: 1850 mm: 700 mm: 1200 mm: 520 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotorlateral roll adjustable by handwheellongitudinal grooves in lower and lateral rolltiltable upper rollright / left rotation with double foot switchconical rolling deviceuser manual in GERMAN or ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 8700 €: 167.91 €: 250 mm: 6 mm: 3 mm: 25 1/min: 90 °: 4 kW: 950 mm: 780 mm: 1115 mm: 585 kgHydraulic driveAutomatic adjustment of the blade gap2 downholder2 gauges angle adjustableProtection cover, acrylic glassFoot pedalWaste boxAccording to ",CE", regulations User manual in English or GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: . mmy-travel: . mmz-travel: . mmcontrol: SIemens type: Shopmill 840 D table surface area: mmworkpiece weight: kgTool changer: 30 Fachspindle taper ISO: Spindle capacity: KWturning speeds: U/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: . mWorkpiece width: Max. 550 mmWorkpiece length: Max. 1300 mmWorkpiece height: Max. 600 mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We l ...

x-travel: . mmy-travel: . mmz-travel: . mmcontrol: SIemens type: 840 D ECOLINE Shopmill table surface area: mmworkpiece weight: kgTool changer: 30 Fachspindle taper ISO: Spindle capacity: KWturning speeds: U/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: . mWorkpiece width: Max. 550 mmWorkpiece length: Max. 1300 mmWorkpiece height: Max. 600 mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointme ...

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 8020 mm: 1.5 mm: 2 mm: 8 ELECTROCINEMATIC DRIVE OF THE BENDING JOINTSmillmeter precise adjustment of the clamping beamBMS MULTI-Touchcontrolelectric powered rotary shearelectronic depth stopflexible material supportsinclined bending beamoptimized geometry of the clamping beamsafety equipment accoring to the control rules BG Germany3 year warranty on stands and tension arms.Quality Made in Germany.FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.OPTIONS: Extended depth 1.250 mm price on request Conical depth stop to bend conical profiles andnarrow/wide bendings for easy intermateing price on request clamping beam made out of hardox price on requestPrices ex works Germany.Transport and commissioningat customers place on request.The data for this ad was created with ModulMWS - the software solu ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 3400 €: 1270 mm: 1.2 mm: 68 mm: 1.5 kW: 1610 mm: 700 mm: 1160 mm: 385 kg3 Walzenasymmetric rolls - prebendinglongitudinal grooves in lower and lateral rollInfeed of the lower roller by a central lever - with gear reductionmachine standuser manual in GERMAN orENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 48100 €: 918.71 €: 2550 mm: 9 mm: 9 mm: 7 mm: 7 mm: 5 mm: 220 mm: 220 mm: 160 mm: 1,5 / 6 m/min: 5.5 kW: 4900 mm: 1150 mm: 1250 mm: 4600 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can be max. 30 % oremust be more than 60 % of roll lengthHardened rolls are recomme ...

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 811 €: 3/4 26,9 mm, 1 33,7 mm, mm: 3 mm: 2.5 mm: 8 kgThe AL 1 can be used to notch pipes with an external diameter of 26.9 mm (3/4",), 33.7 mm (1",) and 42.4 mm (1 1/4",).The hand-operated machines can be easily wall mounted.With ALMI pipe notchers filing or milling pipes has become a thing of the past.The major benefit of this pipe notcher, compared to other notchers, is that one unit can be used to notch a series of diameters without needing to change parts for each diameter.All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sale from candelabra/lamp post factory liquidation. GÉFI LE50/2500 bending machine. With tools. Conditions: according to the pictures - operational. Missing, damaged parts, untested condition. Unverified quality. Auction-ID: A7-48022-39

: 3050 mm: 06,5 mm: -: 0,5-2,5 °: 1000 mmwork height max.: 770 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 62400 €: 1179.36 €: 4100 mm: 6 mm: 4 mm: 50 mm: 12 1/min: 1.5 °: 20 : 17 to: 1000 mm: 200 mm/s: 15 kW: 200 l: 3 Stk.: 865 mm: 580 mm: 4510 mm: 5230 mm: 2300 mm: 3600 mm: 2150 mm: 11460 kgSwing cut constructionNC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB portMotorized back gauge 1000 mm on ball screws, folding upwardsClear control panel mounted on moveablearmHydraulic hold down pistons are arrangedclose to the cutting edgeFoot switchCentral, manual blade gap adjustmentCutting line illuminationBroad table with ballsPiece counterSingle and continous stokeFold up finger guard 1.000 mm1 squaring arm 1. 500 mm with scale,T-slot and tilting cam2 supporting arms 1.000 mm with T-slotSimple replacement and grinding of thebladesVariable adjustable cuttinglength for economic processingLower blade f ...

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 5932 €: 114.49 €: 3/4 26,9 mm, 1 33,7 mm, mm: 5 mm: 3 mm: 93 kgThe motor driven AL 1-2U can be used to notch pipes with an external diameter of 27.9 mm 26.9 mm (3/4",), 33.7 mm (1",), 42.4 mm (1 1/4",), 48.3 mm (1 1/2",) and 60.3 mm (2",)and notch pipes with an external diameterof 22 mm to 76 mm for sink outflows.Do you often have to notch pipes? If so, the motor-driven AL1-2U equipped with a 2.2 kW electric motor is the ideal solution!The motor forms one unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with a zero voltage protection and guard.All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are readily available, ideal for double corner joints.The data for this ad was created  ...

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 1063 €: 1 1/4 42,4, 1 1/2 48,3 mm: 3 mm: 2.5 mm: 15 kgThe AL 3 can be used to notch pipes with an external diameter of 42.4 mm (1 1/4”) and Ø48.3 mm (1 1/2”).ALMI products are subjected to stringent quality control inspections before they leave the factory.ALMI’s pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use.Moreover, the price is more affordable than the auxiliary tools for punch-cutting machines.All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : 1530 mm: 12 mm: 9 mm: 8 1/min: 3 °: 8 : 500 mm: 15 kW: 180 l: 950 mm: 2200 mm: 1200 mm: 1800 mm: 3400 kghydr. drive unit, completely integrated in the machine bodyoverload safety, hydraulic and electricaladjusting of the cutting angleadjusting of the cutting gapblank holder pressure, adjustablesupport arm with angle stop and scale up to 600 mm4 rotating knives for VA steelmovable pedal switch with solenoid valvesMotorised backgaugeCentral lubricationexchangeable machine table supportsection area lightingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 29000 €: 553.9 €: 2050 mm: 4 mm: 42 1/min: 750 mm: 7.5 kW: 800 mm: 450 mm: 2700 mm: 2300 mm: 1350 mm: 2800 kgmotorizedback gauge atrecirculating ballscrew with Control DT5hold down with rubber padsSide Lay with T-Slot2 Sheet support armsball in the tabletape measuretilting stoplight barriers on the back of the machinecutting line illuminationuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 83800 €: 1583.82 €: 2550 mm: 15 mm: 15 mm: 13 mm: 12 mm: 12 mm: 10 mm: 270 mm: 270 mm: 230 mm: 50 mm: 1155 mm: 15 kW: 4760 mm: 1660 mm: 1155 mm: 8950 kg4 rollsfully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear boxhydr. side rolls positioning with electronical synchronisationhydr. lower roll feed with mechanical synchronisationadjustable pinching pressurevariable rolling speedhardened rollsconical bending devicehydraulic drop-end bearingmoveable control paneloverload protectionuser manual in GERMAN or ENGLISHaccording to CE rulesOPTIONAL:NC controlupper and lateral supportsIMPORTANT ISSUES AT CONICAL BENDING:the max. sheet metal thickness isequivalent to 50 % of nominal capacitythe cone length can be max. 30 % oremust be more than 60 % of roll lengthhardened rolls are recommendedThe ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 61300 €: 1158.57 €: 4010 mm: 3.5 mm: Hydraulisch : 135 °: 5600 mm: 1800 mm: 2050 mm: 6100 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rulesALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° OPTION:2 axes NC control Schneider7", touchscreen incl. motorized back gauge 800 mm(sample photos)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1050 mmy-travel: 510 mmz-travel: 560 mmcontrol: Matzatrol type: M Plus table surface area: 1300x550 mm: 1,5 tworkpiece weight: max. 1500 kgTool changer: . spindle taper ISO: Spindle capacity: KWturning speeds: . U/mintotal power requirement: kWweight of the machine ca.: 8,9 tdimensions of the machine ca.: . mWorkpiece width: Max. 550 mmWorkpiece length: Max. 1300 mmWorkpiece height: Max. 600 mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possi ...

x-travel: 1040 mmy-travel: 600 mmz-travel: 500 mmfeed: 30 m/mincontrol: Siemens type: 840 D table surface area: 1250x600 mmtable load: 800 kgTool changer: 30 Fach spindle taper ISO: SK 40 Spindle capacity: KWturning speeds: 12000 U/mintotal power requirement: 24 kvAweight of the machine ca.: 8,8 tdimensions of the machine ca.: . mChip ConveyorQuick-Clamping SystemThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your ...

x-travel: 600 mmy-travel: 560 mmz-travel: 510 mmfeed: 36 m/mincontrol: Siemens type: Shopmill 840 D table surface area: 800x500 mmworkpiece weight: 600 kgTool changer: 30 spindle taper ISO: SK40 Spindle capacity: KWturning speeds: 12000 U/minweight of the machine ca.: 5 tdimensions of the machine ca.: 4000x5000x3000 mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ...

x-travel: 650 mmy-travel: 500 mmz-travel: 530 mmcontrol: Siemens type: 840D Shopmil table surface area: . mmsize of pallet: 800x500 mmworkpiece weight: . kgTool changer: 24 Fach spindle taper ISO: SK 40 Spindle capacity: KWturning speeds: 60-8000 U/minfeed: 30 m/mintotal power requirement: kWweight of the machine ca.: 5 tdimensions of the machine ca.: 4000x5000x3000 mmWorkpiece width: Max. 550 mmWorkpiece length: Max. 1300 mmWorkpiece height: Max. 600 mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can f ...

: neu : 2025 : 090054 : prompt, Zwischenverkauf v : Spanien : 17300 €: 298.94 €: 1 : 15570 €: 55 to: 250 mm: 5 : 40/10 mm: 20 mm: 37 1/min: 300x15 mm: 120x10 mm: 40 mm: 10 mm: 5 kW: 1670 mm: 1160 mm: 2090 mm: 1390 kg2 foot pedal for independent working on 2 stationsflatsteel stationanglesteel stationround- and square steel stationrectangular notching stationpunching stationtable on flat steel stationtable on punching stationtable on notching stationcomplete with hydraulic oiluser manual in GERMAN and ENGLISHOPTION:Kit € 930,00length stop 1000 mm with contact switch, for angle, flat or bar stationmagnetic machine lamp10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0187 : prompt, Zwischenverkauf v : 2912 €: 1 mint condition3 x 835 + 1 x 835 mm sectionedATTENTION: 50T toolThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : Wechseltisch Laser sources from 3 - 30 kWTable dimensions:3 x 1,5 / 4 x 2 / 6 x 2 / 6 x 2,5 mThe shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems.The system consists of the following components:Shuttle table system in longitudinal direction for simultaneous loading/unloading and cutting to reduce non-productive production timesEncapsulated cutting room with protective glazingCNC graphics control Siemens Sinumerik 840DLaser source Brilase or IPGCutting head with automatic focus adjustment, Durma or PrecitecCooling unit for cutting head and laser sourceCAD/CAM software LANTEK for programming including autonestingPositioning laserSheet check system (automatic detection of sheet position and dimensions)Automatic nozzle cleaningCentral lubricationSlug boxWorking ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 55900 €: 1056.51 €: 3100 mm: 9 mm: 8 mm: 7 mm: 7 mm: 5 mm: 245 mm: 245 mm: 180 mm: 1,5 / 6 m/min: 7.5 kW: 5350 mm: 1600 mm: 1470 mm: 6850 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can be max. 30 % oremust be more than 60 % of roll lengthHardened rolls are recomm ...