trabalho de chapa metálica usadas para venda (3,258)

sheet width: 2050 mmplate thickness: 20.0 mm STpre-bending: 16.0 mm STdiameter of upper rolls: ca. 270 mmside roll diameter: ca. 240 mmdiameter of lower rolls: ca. 250 mmNumber of working hours: ca. 7.800 hControl: EASY PRO oil volume: ca. 200 Litervoltage: 380 Vtotal power requirement: 13.5 kWweight: ca. 9.000 kgDimensions (only the machine): 4000 x 2080 x 1800 mm Good condition () Current list price approx. 150.000 euros Special price available upon request Features:- Robust electro-hydraulic 4-roll round bending machine Arc-shaped feed of the side rollers (swing arm technology)- 4-roller design offers a wide range of bending and rounding options Rolling process completed in a single pass- Mobile control unit DAVI DAVI EASY PRO numerical control Manual or automatic operation selectable Programming Self-Learning mode available Control of all rollers and machine axes Digital posit ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 3050 mm: 25 mm: 25 mm: 16 mm: 20 mm: 18 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movemen ...

Working width: approx. 1000 mm Auction-ID: A7-47533-166

pressure: 130 tchamfer lenght: 3060 mmdistance between columns: 2690 mmcolumn arm: 410 mmstroke: 365 mmdayligth: 535 mmajustment speed: 200 mm/secworking feed: 1.0 - 10.0 mm/secreturn speed: 135 mm/sectable width: 120 mmtable height: 1050 mmtiltable up to: +/- 10.0 mmNumber of working hours: ca. 31.800 hcompressed air: 5.0 - 7.0 baroil volume: 250 loperating pressure: 340 barvoltage: 400 Vtotal power requirement: 23.0 KVAweight of the machine ca.: 12950 kgrange L-W-H: 3660 x 2310 x 2900 mm Machine in a well-maintained condition () with only approx. 31.800 operating hours- in checked condition - machine video -https://www.youtube.com/watch?v=PBV-MDtZnlEEquipment:- CNC electro-hydraulic press brake- DELEM CNC control model DA 65 swiveling control panel, front left 2D graphic programming & product display Tool & program library USB keyboard and mouse interface- CNC controlled axes: Y1 + Y2  ...

sheet width: 3050 mmplate thickness: 13.0 mmthickness at Niro-steel: 8.0 mmwork height max.: 930 mmno. of strokes: 9 - 17 Hub/mincutting angle: 0.5 - 3.0 °down holder: 18 StückControl: SC 90 engine output: 22.0 kWweight of the machine ca.: 9500 kgrange L-W-H: 4270 x 2200 x 2250 mm Good / well-maintained condition () Current list price approx. 80.000 euros Features:- Electro-hydraulic / slide-guided guillotine shear - HACO CNC control model SC 90 Preset positioning of the backgauge Digital display of actual position Electro-hydraulic cutting angle adjustment Electro-hydraulic cutting gap adjustment LCD display Emergency stop switch- NC electro-motorized backgauge, on ball screws- Hydraulic hold-down devices- Front finger guard- Ball bearings in the support table Support table with recessed handles- 1x side stop, with mm scale- 1x front support arms- 1x freely movable foot switch- Rear s ...

sheet width: 4100 mmplate thickness: 6.35 mmthickness at Niro-steel: 4.00 mmcutting angle: 0.5 - 2.5 °cutting gap adjustment: 0.05 - 0.8 mmno. of strokes: 9 - 26 Hub/minback stop - adjustable: 10.0 - 750 mmdown holder: 22 Stk.oil volume: 200 ltr.engine output: 7.5 kWweight: 8000 kg.range L-W-H: 5145 x 2200 x 1750 mm From a maintenance workshop Very well-maintained / good condition With very few operating hours () Current list price approx. 60.000 euros Special price upon request Features:- Robust electro-hydraulic, slide-guided sheet metal shear- LVD control panel centrally located on the front of the machine (left)- Electro-hydraulic cutting angle adjustment Includes digital display of actual values- Manual cutting gap adjustment via handwheel from the front (left) Includes analog value display- Electro-motorized backgauge with ball screws Includes digital actual position display Rapi ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 98600 €: 1863.54 €: 3100 mm: 16 mm: 16 mm: 13 mm: 16 mm: 14 mm: 12 mm: 300 mm: 300 mm: 240 mm: 50 mm: 1140 mm: 18.5 kW: 5310 mm: 1660 mm: 1140 mm: 11100 kg4 rollsfully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear boxhydr. side rolls positioning with electronical synchronisationhydr. lower roll feed with mechanical synchronisationadjustable pinching pressurevariable rolling speedhardened rollsconical bending devicehydraulic drop-end bearingmoveable control paneloverload protectionuser manual in GERMAN or ENGLISHaccording to CE rulesOPTIONAL:NC controlupper and lateral supportsIMPORTANT ISSUES AT CONICAL BENDING:the max. sheet metal thickness isequivalent to 50 % of nominal capacityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 47600 €: 909.16 €: 3100 mm: 2.5 mm: Hydraulisch : 135 °: 4300 mm: 1770 mm: 1890 mm: 4000 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rulesALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° OPTION:2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 6200 mmplate thickness: 8 mmthroat: 60 mmdistance between columns: 6400 mmcutting angle adjustment: 0,5 bis 2 °total power requirement: 13 kWweight of the machine ca.: 19 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical details Manufacturer: PROMELCO S.r.l. Model: STF4A Type: Wire straightening, cutting and processing machine Year: 1990 Serial number: 481 Configuration: - Wire feeding and straightening system - Feed roller assembly - Wire processing and cutting section - Electrical control cabinet - Retrofitted Schneider Magelis HMI touchscreen interface Construction: Heavy-duty industrial steel frame Application: - Steel wire processing - Reinforcing wire production - Fencing wire manufacturing - Industrial wire straightening and cutting operations Condition: Used, untested Observed condition: - Machine appears substantially complete - Electrical cabinet present - Feed rollers installed - Indoor storage condition - Significant dust accumulation visible - Wiring stored on top of machine - Tooling inventory not available - Operational status unknown Auction-ID: A7-47311-10

Technical details Manufacturer: EVG Model: RA-XE 16/5 Type: Automatic reinforcing steel straightening and bending machine Year: 2000 Wire/rebar diameter range: 6–16 mm Number of rotors: 5 Number of payoffs: 5 Maximum bending length: 15,000 mm Configuration: - Multi-coil feeding system - 5 payoff stations - Automatic wire feeding system - Rotor straightening technology - Multi-line feed capability - Automated wire guidance system - Programmable bending head - Automatic length measurement - Automatic shape production Control system: - Computerized production control software - Length programming - Shape programming - Job storage and production management Application: - Reinforcing steel processing - Rebar straightening - Rebar bending - Precast concrete production - Construction reinforcement manufacturing Condition: Used, good industrial condition Observed condition: - Complete installa ...

sheet width: 2540 mmplate thickness: 2,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 1,60 tdimensions of the machine ca.: mManual back gauge up to 550 mmSide gauge and table extensionsSharpened bladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2540 mmplate thickness: 2,50 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 2,00 tdimensions of the machine ca.: mMotorized backgauge with flip-up stops, up to 1500 mmMultiple program sequences with varying bending angles and stroke heights possibleMultibend 2000 control systemGround bending beamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 1650 mmmaterial thickness: 3,00 mmno. of straightening rolls: 21 Control: sheet thickness - min.: 0,50 mmdiam. of the rolls ca.: 50 mmbetween stands ca.: 1720 mmrun-in height: 1250 mmtotal power requirement: 45 kWweight of the machine ca.: 24,50 tdimensions of the machine ca.: m6-HIGH LEVELER / Strip Leveler / with Quick-Change System- 18 Back-up Supports- Digital Roll Adjustment (0.01 mm resolution)- Gearbox renewed in 2021- Quick-Change SystemThe quick-change system is mounted on a sliding plate. This sliding plate—on which the leveling rolls as well as the entire back-up support assembly are mounted—can be extended, allowing for quick and easy roll replacement in an easily accessible position.The extension and retraction of the sliding plate are hydraulically actuated. Connection to the drive mechanism is automatic.- Intermediate RollsThe intermediate rolls preve ...

material width: 1500 mmmaterial thickness: 3,00 mmno. of straightening rolls: 23 between stands ca.: 1530 mmthickness min. approx.: 0,50 mmdiam. of the rolls ca.: 47 mmstraight. speed ca.: m/ minbarrel length ca.: 1560 mmtotal power requirement: 23 kWweight of the machine ca.: 9,00 tdimensions of the machine ca.: 4,30 x 1,80 x 2,60 mFeatures:- Maximum vertical roller spacing: 20 mm (Note: Scale only extends to 15 mm)- 5-point lower support with support rollers (individually adjustable)- 5-point upper support with support rollers- Lower roller crowning- Circulating lubrication for gearbox and universal shafts- Infeed and outfeed tables included- Reversible operation- Centralized grease lubrication for straightening roller bearings- MITSUBISHI ELECTRONIC frequency inverter- Drive motor: 22 kW- Drive motor features a simple On/Off switch- Oil pump features a simple On/Off switch- Manual he ...

Automatic stirrup bending machine, 4 payoffs, double bending 8-12mm, single bending 8-16 mm, working hours 1322, very good condition Auction-ID: A7-47311-2

Automatic stirrup bending machine, 1 payoff, double bending 8-12mm, single bending 8-14 mm Auction-ID: A7-47311-5

plate thickness: 1,25 mmworking length: 8100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: / mmcoil weight: / tcoil internal dia.: / mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic straigntening, bending and cutting machine up to 16 mm, 5 payoffs, 5 hyperbolic rotors, max cutting length 1200 cm Auction-ID: A7-47311-8

Automatic stirrup bending machine, 1 payoff, double bending 8-12mm, single bending 8-14 mm Auction-ID: A7-47311-4

Automatic straigntening, bending and cutting machine up to 16 mm, 5 payoffs Auction-ID: A7-47311-6

Automatic straigntening, bending and cutting machine up to 16 mm, 5 payoffs, 5 rotors, max cutting length 1600 cm Auction-ID: A7-47311-7

: neu : ca. 12 Wochen ab Auftrags : Türkei : 19100 €: 366.72 €: 4000 kg: 1300 mm: 450 - 550 mm: 600 mm: 50 mm: 80 mmmotorized drivemechanical adjustable coil mandrel with 4 jawsspeed control for decoiling speed aswell as acceleration- and deceleration timesphotoelectric proximity ensor SICK for sag controlALTERNATIVES (prices on request):Version with pneumatic pressure armVersion with brake, without motor, with or withaout pneumatic pressure armThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mmplate thickness: 2.5 mmthickness at Niro-steel: 1.5 mmno. of strokes: max. 35 Hub/mincutting angle: 2°10 table height: 905 mmtable width: 390 mmback stop - adjustable: ca. 750 mmControl: konv. engine output: 3.0 kWweight of the machine ca.: 1750 kgrange L-W-H: 3730 x 2070 x 1400 mm New price approx. 45.000 euros () Special price on requestEquipment:- robust / motorized swing cut guillotine shears- Machine with electric material / backgauge Traverse path approx. 750 mm (infinitely variable adjustment range) analog position indicator Manual adjustment from the front- unbreakable and torsion-free welded steel construction- Compact and clear machine construction- 1x hold-down beam- Integrated sheet holding system for thin sheet blanks- sheet/cut material removal at the front (operator side)- 1x side stop with mm scale- Extendable table extension (approx. 350 mm)- 1x free ...

puncher: 100 tround bar steel: 50.0 mmsquare edge steel: 50 x 50 mmL-beam: 150 x 150 x 13 mmhole punching press: capacity (dia. x thick.): Ø 30.0 x 26 mmshear: flat material: 600 x 15 mmthroat: 300 mmwork stroke: 80.0 mmwork height max.: 1165 / 960 mmtotal power requirement: 9.0 kWweight: 2250 kgrange L-W-H: 2050 x 1200 x 2050 mm well-maintained condition () current new price approx. 30.000 euros special price on requestEquipment:- electro-hydraulic profile steel shears with 4x work stations Flat steel shears Profile steel shears Hole punch notching station- driven by two hydraulic cylinders- Infinitely variable stroke adjustment- Support table at hole punching station- Material scraper- Lateral storage options- 2x freely movable foot switches- Many accessories included in the scope of delivery swiveling machine lamp Various punch dies Spare blades for the flat steel station ... etc.-  ...

puncher: 70.0 tsquare edge steel: 45.0 x 45.0 mmround bar steel: 45.0 mmL-beam: 150 x 150 x 13 mmhole punching press: capacity (dia. x thick.): Ø 27.0 x 20 mmshear: flat material: 450 x 15 / 300 x 20 mmthroat: 300 mmwork stroke: 70.0 mmwork height max.: 1095 mmtotal power requirement: 9.0 kWweight: 1925 kgrange L-W-H: 1800 x 1200 x 2000 mm current new price approx. 25.000 euros special price on requestEquipment:- electro-hydraulic profile steel shears with 4x work stations flat steel shears profile steel shears hole punch notching station- driven by two hydraulic cylinders- stepless stroke adjustment- support table at hole punching & notching station- material stripper- side storage options- 2x freely movable foot switches- operating instructions (PDF)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 32 mmsquare edge steel: 60 x 6 mmL-beam: mmpressure: 50 tstroke: 10 - 28 mmtotal power requirement: 4 kWweight of the machine ca.: 1 tdimensions of the machine ca.: 0,65 x 1, 2 x 1, 67 mMaximum pressing force 50 tFLAT STEEL SHEAR PERFORMANCEFlat steel: 150 x 15 mm or: 180 x 18 mmPERFORMANCE OF PROFILE STEEL SHEARS Steel 90°: 80 x 8 mm 45°: 50 x 6 mmAngle steel 90°: 100 x 10 mm 45°: 50 x 6 mmPERFORMANCE OF BAR STEEL SHEARS Round steel: 32 mmSquare steel: 30 x 30 mmPERFORMANCE SQUARE NOTCHER: 60 x 6 mmSheet metal up to: 10 mmNotch width: 42 mm:Notch depth: 55 mmPERFORMANCE HOLE PUNCHPunching force: 50 tStroke: 10 - 28 mm Punches:27 in 14 mmProjection: 155 mmGENERAL DATADrive power: 4.0 kWOil capacity: 40 lDimensions L x W x H: 650 x 1200 x 1670 mmWeight approx.: 840 kg Translated with DeepL.com (free version)The data for this ad was created with ModulMWS - the softwar ...

sheet width: 500 mmplate thickness: 0,8 - 5 mmno. of straightening rolls: 7 straightening roll diameter: 80 mm2 pinch rolls, diameter: 80 mmAdjustable entry heightPass line: 505 mmOiling systemRoller cageStrip guide: 505 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.