trabalho de chapa metálica usadas para venda (3,344)

: neu : ca. 8 Wochen ab Auftragse : Türkei : 12900 €: 247.68 €: 40 to: 285 mm: 200x24 mm: 660x1250 mm: 250 mm: 80 mm: 10 mm/s: 10 mm/s: 4 kW: 930 mm: 1250 mm: 650 mm: 1250 mm: 1100 kgStroke adjustment with digital displayManual and automatic operation modeTool holder pins and tools hardened and groundBending toolFoot pedalOPTIONS:Cutting-, punching- or pipe bending tools on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 080200 : prompt, Zwischenverkauf v : Türkei : 6550 €: 126.42 €: 1 : 1250 mm: 1.25 mm: 0.8 mm: 2 mm: 150 °: 500 mm: 200 mm: 1500 mm: 750 mm: 1715 mm: 315 kg: geteilt, 45° : Verstellbereich 35 mm Sectioned upper- lower- and bending tool, material 42CrMo4, hardened to 60HRCManual back gaugeAdjustable angle gaugeShelve and box for toolsMachine on rolls with brakesOperating manual in German or EnglishThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 090194 : prompt, Zwischenverkauf v : Spanien : 22400 €: 430.08 €: 1 : 1 : 60 to: 250 mm: 5 : 40 x 11 mm: 32 1/min: 350 x 15 mm: 120 x 10 mm: 45 / 40 mm: 10 mm: max. 150x10 mm: 5.5 kW: 1850 mm: 1300 mm: 2100 mm: 1390 kgwith bending station5 working stationsflat steel shear with device to reduce deformationangle iron shear with round- and squarebars openingtriangle notcherpunching stationpress brake device for flat steeltable at flat steel stationtable at notching stationlength stop 1000 mm with contact switch, for angle, flat or bar stationhydraulic drive2 foot releaseuser manual in GERMAN and ENGLISHWE HAVE MORE THAN 700 REFERENCES!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 12300 €: 236.16 €: 1270 mm: 4 mm: 120 mm: 3 m/min: 2.2 kW: 2470 mm: 750 mm: 1000 mm: 1110 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotormanual Back Rollforward tiltable upper rollforward and reverse revsconical bending by tilt of backrollmovable control panelusers manual in ENGLISH or GERMANOPTIONS:hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-OutThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 81500 €: 1540.35 €: 8 mm: 5 mm: 80 mm: 10 mm: 4500 mm: 720 mm: 95 (R 80) / 35 (R 25) mm: 11 kW: 4900 mm: 1700 mm: 2700 mm: 4550 kgincl. flanging rolls for mild steel (R25)incl. cutting bladetop and lower roll driven by hydromotor and plantary gear boxpossible to flange both, flat and crowned bottomshydraulically adjustable bottom heightcutting and flanging on the same headlateral support rollsoperator panel with touch screenOptional devices as fix or variable angle japanese hat attachement, rolls for stainless steel or high speed, small diameter attachement... on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 5 mmcutting length: 3000 mmrear stop: 750 mm total power requirement: 7,5-10 kWweight of the machine ca.: 4 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Spanien STANDARD EQUIPMENT• Uncoiler• Coil car• Pneumatic input table• Entry guide• 7 Straightening rolls• Slitting shaft with 3 sets of quickly adjustable circular blades• Cut-to-length shears• ServomotorOPTIONS• Hydraulic input table• Film plastic device• Scrap rewinders• Additional circular blades• Stacking tables• Packers Model: Width to process: Cutting thickness (mm): Coil weight (kg) Number of straightening rolls: Cutting accuracy: Number of straightening rolls: Production speed: TwinCut 20 DM6 100012501500 0`5 - 2 6.000 3 - 6+/? 0`5 mm 2 + 7 20 m/min TwinCut 20 DM10 10.000 TwinCut 20 DM15 15.000 MATERIAL TO BE PROCESSED: THICKNESS: N OF SIMULTANEOUS CUTS: Steel 420 Nw/mm2 2`00 mm 3 1`50 mm 4 0`50 mm 6 Steel 700 Nw/mm2 1`25 mm 3 1`00 mm 4 0`50 mm 6 Steel 200 Nw/mm2 4`00 mm 3 2`00 mm 5 1`00 mm 6IF YOU ARE INTERESTED, P ...

: gebraucht : WA0181 : prompt, Zwischenverkauf v : 1800 €: 1 : 3100 mm: 160 mm: 45 mmmint condition86° Slightly cranked, planedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0042 : 950 €: 1 : 835 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0081 : 177 €: 1 : 835 mm: 1 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0180 : prompt, Zwischenverkauf v : 1800 €: 1 : 3100 mm: 80 mm: 80 mm: 86° 10/15/20/30/40/50mm mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mmplate thickness: 12.0 mm STplate thickness: 8.0 mm VAno. of strokes: 7 - 14 Hub/mindown holder: 18 Stückcutting angle: 0.5 - 3.0 °work height max.: 930 mmback stop - adjustable: 1000 mmControl: SP 8 total power requirement: 22.5 kWweight: 8500 kgrange L-W-H: 4180 x 2030 x 2210 mm from a maintenance workshop good / well-maintained condition ()Equipment:- electro-hydraulic guillotine shear with guided blade beam- includes HACO NC control system SP 9 in like-new condition backgauge pre-selection positioning digital display of actual value electro-hydraulic cutting angle adjustment with digital display emergency stop switch- NC motorized backgauge on recirculating ball screws- manual blade gap adjustment, adjustable from the rear- front finger guard- 1x side gauge ... 1,000 mm- rear sheet metal chute- 1x movable foot pedal- operating manualThe data for this ad was creat ...

Equipped with foot control, including workbench. Auction-ID: A1-48474-261

Equipped with foot control, on and including work table lxbxh 255x115x85cm Auction-ID: A1-48474-19

Maximum Ø approximately: 8 mm Auction-ID: A1-48474-33

On and including table 50x50x90cm. Auction-ID: A1-48474-156

Auction-ID: A1-48474-104

: neu : 2024 : 7314 : prompt, Zwischenverkauf v : Türkei : 14800 €: 284.16 €: 1 : 2500 kg: 1300 mm: 450 mm: 550 mm: 600 mm: 80 mm: 1600 mm: 1550 mm: 2000 mm: 580 kgmotorized drivemechanical adjustable coil mandrel with 4 jawsspeed control for decoiling speed aswell as acceleration- and deceleration timesphotoelectric proximity ensor SICK for sag controlPneumatic downholderALTERNATIVES (prices on request):Version without pneumatic pressure armVersion with brake, without motor, with or withaout pneumatic pressure armThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 7300 €: 140.89 €: 10 to: 185 mm: 150x8 mm: 450x900 mm: 150 mm: 60 mm: 10 mm/s: 10 mm/s: 1.1 kW: 915 mm: 900 mm: 450 mm: 1130 mm: 250 kgStroke adjustment with digital displayManual and automatic operation modeTool holder pins and tools hardened and groundBending toolFoot pedalOPTIONS:Cutting-, punching- or pipe bending tools on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

On and including work table lxbxh 170x90x85 Auction-ID: A1-48474-22

Auction-ID: A1-48474-105

On and including work table lxbxh 200x70x85cm, including 1x Meulemans type 10 punch on and including work table lxbxh 150x70x85cm Auction-ID: A1-48474-20

Equipped with foot control, on and including work table lxbxh 2450x1600x880 mm, including contents. Auction-ID: A1-48474-45

On and including work table lxbxh 150x70x90cm Auction-ID: A1-48474-21

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 94900 €: 1793.61 €: 4100 mm: 13 mm: 8 mm: 350 mm: 8 1/min: 1.75 °: 18 : 62 to: 1000 mm: 200 mm/s: 30 kW: 330 l: 3 Stk.: 818 mm: 550 mm: 4520 mm: 5350 mm: 2250 mm: 3650 mm: 2250 mm: 16300 kgSwing cut constructionNC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB portMotorized back gauge 1000 mm on ball screws, folding upwardsClear control panel mounted on moveablearmHydraulic hold down pistons are arrangedclose to the cutting edgeFoot switchCentral, manual blade gap adjustmentCutting line illuminationBroad table with ballsPiece counterSingle and continous stokeFold up finger guard 1.000 mm1 squaring arm 1. 500 mm with scale,T-slot and tilting cam2 supporting arms 1.000 mm with T-slotSimple replacement and grinding of thebladesVariable adjustable cuttinglength for economic processingLower blade ...

: gebraucht : WA0148 : 350 €: 1 : 3050 mm: 120 mmcrankedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: ca. 12 - 14 Wochen ab Auf : Türkei : 21400 €: 5 mm: 1200 mm: 4,1 m/min: 3000 mm: 750 mm: 1400 mm: 1350 kg: 250 / 2000 mm: 300 mmMobile control panelHydraulic clamp on centerGearbox motor with brakeMotorized sheet centering systemInside cutting systemAccording to EC safety regulationsOperating manualOptional equipment (prices on request): 1 spare blade set Flanging attachment with 1 set rollsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Complete with accessories Auction-ID: A7-49136-3

: gebraucht : 2010 : 080065 : prompt, Zwischenverkauf v : Deutschland : 29800 €: 1 : 2040 mm: 3 mm: 2 mm: 4.5 mm: Motorisch : 1.5 kW: 1.1 kW: 3060 mm: 1650 mm: 1500 mm: 2730 kg: 750 mm: 140 mm: 50 °/sekCNC control ECT (Schneider Magelis)- Input of bending angle, depth stop dimension, lifting height, folding, precut- max. 36 bending angles can be saved per set- max. 510 sets can be saved- comfortable 7.5", color touch TFT monitor- Power mode for material-friendly operation- Soft start of the bending beam and the depth stop- Visual user guidance in the event of faults (diagnosis center)- Selection of different languages such as German, English ...CNC back gauge- Back gauge range 6 - 750 mm- Drive via belt- 6 stop fingers- support plates with brushesSectioned goose neck rail height 75 mmAdditional 10 mm rail on the bening beamFlat rail R 1 mmFlat rail R 2 mmMechanical drive via gear  ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 3050 mm: 16 mm: 16 mm: 10 mm: 13 mm: 11 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movemen ...