trabalho de chapa metálica usadas para venda (3,344)

plate thickness: 4 mmplate length: 200 mmtotal power requirement: 3 kWweight of the machine ca.: 550 kgdimensions of the machine ca.: 1,0 x 0,8 x 1,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1250 mmplate thickness: 4,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 2,80 tdimensions of the machine ca.: mPowered BackgaugeSide Stop and Table ExtensionsCut Length LimitationCutting Line IlluminationLight Barrier for Rear Area GuardingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 0300 mmmaterial thickness: 2,50 mmno. of straightening rolls: 11 feed rolls: 2 exit pinch rolls: 2 diam. of the rolls ca.: 60 mmstraightening speed: 5 - 30 mm/minsheet thickness - min.: 0,40 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mFeatures:• All upper rollers manually adjustable• All lower rollers interconnected via gears• Speed manually adjustable via handwheel• Strip guide at the infeed• Roller basket at the outfeed• Sensor arm for loop controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2520 mmplate thickness: 3.2 mm STcutting thickness max.: 5.0 mm ALcutting thickness max.: 1.5 mm VAno. of strokes: 34 Hub/mincutting angle: 1° 20 Gradback stop - adjustable: max. 1.000 mmwork height max.: 800 mmtotal power requirement: 7.5 kWweight of the machine ca.: 2100 kg New price approx. 21,000 euros Special price on request Machine was rarely used - good condition ()Furnishing:- robust / motorized swing-cut guillotine shears- Shatterproof, torsion-free steel welded construction- compact and clear mechanical design- ESTUN NC digital display - type E10-S- electro-motorized back gauge, adjustment via electric. Button- 1x hold-down bar- manual cutting gap adjustment- rear protective device (side protective grilles)- Selector switch for single and continuous stroke- 1x front side stop- 2x front support arms- 1x freely movable foot switch- original instruction manualThe da ...

pressure: 50 tchamfer lenght: 1500 mmdistance between columns: 1220 mmControl: Cybelec DNC 1200 closing speed: 95 mm/minworking feed: 1-10 mm/secwork stroke: 156 mmoverrun time: 59 mstracking travel: 6 mmthroat: 200 mmdistance table - lower edge of ram: 301 mmtable width: 160 mmtable height: 850 mmx-axis: 550 mmtravel R-axis: +/- 50 Number of axles: 3 (Y, X, R) St.weight: ca. 3600 kgdimensions: mma lot of lower and upper toolsincl. work lightnew control in 2003: Cybelec DNC 1200The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 0280 mmcoil weight: 1,00 tcoil internal dia.: 290 - 570 mmcoil outside - diam. ca.: 1000 mm0: 42 U/mintotal power requirement: 1,10 kWweight of the machine ca.: tdimensions of the machine ca.: 1,30 x 1,00 x 1,45 mControl unit missingprovisionally connectedmechanical brakeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working hours laser on: 50921 h Working hours beam on: 21717 h Laser power: 3200 Watt Working range laser: 4000 x 2000 x 115 mm Max. steel: 20 mm Max. stainless steel: 12 mm Max. aluminium: 8 mm Length: 11600 mm Width: 5300 mm Height: 2200 mm Machine weight: 16000 kg Electrical connected load: 73 kVA

Working hours machine: 23304 h Working hours laser on: 22804 h Working hours beam on: 10185 h Laser power: 4400 Watt Working range laser: 3000 x 1500 mm Max. steel: 25 mm Max. stainless steel: 20 mm Max. aluminium: 12 mm Length: 12800 mm Width: 6300 mm Height: 2400 mm Machine weight: 15000 kg Electrical connected load: 51 kVA

Decoiler Coil weight: 2 x 2 ton Material width: 380 - 500 mm Coil exterior diameter: 1.300 - 1.400 mm Expansion range: 445 -530 mm Leveller / Straightener Material width : 40 - 500 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pinch rolls: 2 pcs. Diameter of the drawing rolls: 60 mm Number of pull out rolls: 2 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 1,6 mm Cross section: 800 sq mm Feeding speed: 0 - 30 m / min Required power: 3 kW

Coil weight: 500 kg Material width: 41 mm Coil exterior diameter: 1.000 mm Expansion range: 250 - 500 mm Speed: 20 m / min Required power: 0,5 kW Dimensions L x W x H: 1.000 x 850 x 1.700 mm Weight of machine approx.: 200 kg

contact roller: 70 x 50 abrasive belt size: 2000 x 12/50 power capacity: 2,2 kWOverall size: ca. 400 x 1100 x 1250 mmdeburring machine / free belt frinding machineabrasive belt with widt from 12-50 mm with vertical working positionhead inclination up to 45° both wayseasy bending of the belt allows to follow the shapecutting speed 24m / secbig tabel surface with ball rollingwith self filtering dust extractor system, filtering bag in retardant polyester material for retaining finest dust. Impeller with open blades to prevent clogging. air consumption 700 m³/hcomes with a huge bunch of belts!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bending speed: 2.1 m/minBending capacity - square: 30x30 mmbending capacity - flat iron: 80x15 mmBending capacity - flat iron on edge: 50x10 mmtube diameter: 1 oder 60x2 mmShaft diameter - upper: 35 mmShaft diameter - lower: 30 mmtotal power requirement: 0,75 kwrange L-W-H: 650 x 500 x 1300 mmweight: 170 kgStandard features:- hardened special steel shafts- a set of hardened rollers- Bottom rollers are driven- lateral straightening rollers- Foot pedal- horizontal and vertical workingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

serial number: 4412956673057 : 95 to. ca. engine output: 7,5 kWweight of the machine ca.: ca 5 tdimensions of the machine ca.: 2,2 × 1,0 × 2,3 m Technical specifications (from the label)Angle steel (L-profile):150 × 15 mm at 90°100 × 14 mm at 45°Flat steel:up to approx. 150 × 16 mmlarger cross-sections up to 340 × 16 mm (depending on function)Beam profiles:U-profiles (UPN): 220I-sections (IPN)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2040 mmplate thickness: 4,0 mmdistance between columns: 2100 mmroll diameter: 150 mmtotal power requirement: 7,0 KWweight of the machine ca.: 2,2 tdimensions of the machine ca.: 2,95 x 1,0 x 1,75 mmSheet metal bending machine with 3 rollers- 2 driven rollers- Rear roller electrically adjustable- Conical bending- Foot switch- Emergency stop deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1020 mmplate thickness: 2.5 mm: 45.0 mmbending angle max.: 0 - 135 °weight of the machine ca.: 285 kgrange L-W-H: 1175 x 850 x 1175 mmDescription:Swivel bending machine with patented hydraulic auxiliary cylinder andRemote control. The machine is both manual (for thinner sheets) andmotorized (for thick sheets) operated. The motorized function is overa remote control operated with an emergency stop.Version S - with segmented upper beam for boxes and special profiles- Max. Bending angle 135 °- Max. Opening upper beam 45 mm- The HS Ergo is a further developed machine that uses a patient hydraulic auxiliary cylinder is supported- The machine is both manual (for thinner sheets) and motorized (for thick sheets) operated.- the motorized function is operated via a remote control with emergency stop The data for this ad was created with ModulMWS - the software solution of LogoTech ...

plate thickness: 4,0 mmroll diameter: ca. 120 mmthroat: 450 mmtotal power requirement: kWweight of the machine ca.: 0,48 tdimensions of the machine ca.: 1,3 x 0,8 x 1,8 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1250 mmplate thickness: 1,5 mmdistance between columns: 1300 mmdaylight opening: 80 mm: 155 °total power requirement: Handbetrieben weight of the machine ca.: 0,18 tdimensions of the machine ca.: 1,4 x 0,8 x 1,3 mSegment-bending machineSegment widths:2x50mm,1x70mm,2x75mm, 2x100mm,4x150mm, 1x170m.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 70 -800 kNchamfer lenght: 2505 mmdistance between columns: 2125 mmControl: OP 2000 controlled axis: 7 throat: 420 mmstroke: 200 mmdayligth: 470 mmNumber of working hours: htable width: 60 mmtable height: 960 mmajustment speed: 100 mm/secworking feed: 10 mm/secreturn speed: 100 mm/secweight of the machine ca.: 6,3 tPatented Amada technology ensures absolutely correct bending results withoutbombing deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 6 - 42 mmwall strength: 3 mmbending radius min.: 180 mmbending radius max.: 5 mmtotal power requirement: 1,5 kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: mEquipment:Saw unitNotching unitDeburring unit for internal and external edgesFlaring unit / flaring function (necking / expanding)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2500 mmplate thickness: 3,0 mmdistance between columns: 2550 mmtrue cutting angle adjustable: - back stop - adjustable: max. 510 mmcutting gap adjustment: - mmtotal power requirement: kWweight of the machine ca.: 1,8 tdimensions: 3,3 x 1,4 x 1,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1000 mmplate thickness: 3,0 mmdistance between columns: 1050 mmdiameter of upper rolls: 90 mmtotal power requirement: 1,1 KWweight of the machine ca.: 0,47 tdimensions of the machine ca.: 1,7 x 0,8 x 1,35 mmSheet metal bending machine with custom dimensions:- Capacity 1050 x 3.0 mm- Digital display- Hardened rollers- Conical bending- Swiveling top roller- Brake motor- Safety device: Emergency stop cord- Documentation in English- 400VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting dimensions max.: 600 x 1000 mmplate thickness: max. 3 mmcutting angle: 1,5 °side stop electrical adjustable: 0 - 1010 mmrear stop electrical adjustable: 0 - 610 mmno. of strokes: 60 Hub/mintotal power requirement: 14 kWweight of the machine ca.: 8,7 tdimensions of machine L x W x H: 2,5 x 2,18 x 2,3 mAccessories: sheet metal stacking device on railsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1350 mmplate thickness: 4.0 mmthickness at Niro-steel: 2.0 mmno. of strokes: max. 35 Hub/mincutting angle: 2.0 Gradtable height: 945 mmdistance between columns: 1361 mmControl: CIDAN / SIEMENS engine output: 5.5 kWweight of the machine ca.: 1400 kgrange L-W-H: 2200 x 2000 x 1550 mmFeatures:- robust / motorized swing cut guillotine shears- unbreakable and torsion-free welded steel construction- compact and clear machine construction- NC electro-motorized backgauge, with digital display Target / actual value stop value input stepless adjustment over the entire travel range- 1x hold-down bar- 1x material side stop- recessed grips in the front support table- Manual cutting gap adjustment from the front- Rear sheet holding device for thin sheets- 1x freely movable foot switch- Operating instructions (PDF)The data for this ad was created with ModulMWS - the software solution of Lo ...

punching force max.: 50 tthroat: 510 mmstroke: 32 mmstroke - stepless adjustable: 10 - 32 mmno. of strokes: 35 bei 10 mm Hub/minWorking height: 1070 mmdaylight: 350 mmtable width: 255 mmdimensions: ca. 1080 x 650 x 1680 mmmaterial layer: 630 X 535 weight: ca. 1400 kgScraper, height-adjustable and removable, with interchangeable plateHydraulic low-pressure finder for foot switch operationTwo-stage foot switch and electrical controlsIntegrated hydraulic unitWith punching saddle for dies no. 3 and 4, up to Ø 39.5 mmQuick-change device for punches 3 and 6 up to Ø 39.5 mmPeddinghaus blue serieswith material support table no. 513, dimensions 630 x 535 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 4000 mmplate thickness: 30 / 35 mmpre-bending: 30 mmdiameter of upper rolls: 570 mmside roll diameter: 450 mmdiameter of lower rolls: 540 mmbending speed: 4 m/minmin. bending diameter: 650 mmtotal power requirement: 60 kWweight of the machine ca.: 52 todimensions of the machine ca.: - mThe machine was overhauled in 2022Equipment:- Hydraulic 4-roller round bending machine- Roll material: 61 MnCrMo 43- Driven rolls: 2 Top-and bottom roll-- Drive: over 2 hydro motors direct flanged-- Adjustment speed bottom roll: 0-200 mm/min-- Adjustment speed side rolls: 0-700 mm/min- Speed compensation between top-and bottom roll: automatic- Operation of the tilting bearing: hydraulic- Tilting of the top roll: hydraulic- Bearing block: hydraulic- Indicator device of roll position: digitalThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2050 mmplate thickness: 4,5 mmpre-bending: 4,0 mmmin. dia.: 210 mmroll diameter: 140 mmweight of the machine ca.: 1530 kgdimensions of the machine ca.: 3220x1200x900 mmStandard features:- Central rollers via electric motor, planetary reduction gear andGear drive driven- Swivel top roller- Main engine with brake device- Conical bending device- Mobile controller and foot pedal- CE mark / Declaration of ConformityAdditional equipment:- motorized rear roller adjustment- Digital display for back roller- induction hardened rollsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 0400 mmcoil weight: 1,50 tmaterial thickness: mmnomb. of straightening rolls: 9 diam. of the rolls ca.: 30 mmrange of expansion ca.: 460 - 530 mmcoil outside - diam. ca.: 1500 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: : : total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.