trabalho de chapa metálica usadas para venda (3,344)

sheet width: 3050 mmplate thickness: 10 mm: 11 kWrange L-W-H: 4000 x 2220 x 1830 mmweight: 6.300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mmplate thickness: 10 mmcontrol: Elgo 87 P2 : 11 - 31 Hub/mincutting angle adjustment: 1 - 4 °Number of hold downs: 16 Stück: 900 kg: 11 kWtable width: 700 mmtable height: 800 mmrange L-W-H: 4000 x 2220 x 1830 mmweight: 6300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2000 mmplate thickness: 3,5 mmdistance between columns: 2050 mmdaylight opening: 355 mmtotal power requirement: kWweight of the machine ca.: 2,8 tdimensions of the machine ca.: 3,5 x 1,5 x 1,5 mBending machine- Bending angle preselection via limit switchesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 4050 mmplate thickness: 10 mmweight of the machine ca.: 18 tdistance between columns: mmtotal power requirement: kWdimensions of the machine ca.: mDelem DAC-362 NC-controlprogrammable limit stopautomatic cutting crack adjustmentautomatic cutting angle adjustmentThe machine has only 800 working hoursTechnische Daten / technical details:Schnittlänge / max. cutting length 4050 mmSchnittleistung / cutting capacity 10 mmAusladung / overhang 210 mmHinteranschlag / limit stop 1000 mmAntriebsleistung Motor/ drive capacity motor 15 kWGewicht der Maschine ca. / weight 18000 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 6 mmblade length: 200 mmangle adjustable from - to: fest 90 Gradtable surface area: 750 x 500 mmpressure: ttotal power requirement: 3,0 kWweight of the machine ca.: 0,62 tdimensions: 1,2 x 0,8 x 1,2 mCombination machine: edging and notching- foot switch- Emergency stop switch- DocumentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1000 mmplate thickness: 1,0 mmdistance between columns: 1030 mmdaylight opening: 80 mm: 135 °total power requirement: Handbetrieben weight of the machine ca.: 0,15 tdimensions of the machine ca.: 1,3 x 0,8 x 1,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1000 mmplate thickness: 5,0 mmdistance between columns: 1100 mm: 1010 mmCutting length: variabel mmcutting gap adjustment: variabel mmconnected load: 5,0 kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: 1,8 x 1,6 x 1,7 mHydraulic guillotine shear with- Cutting gap adjustment- Support arms- Squaring armThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2035 mmplate thickness: 6 mmdistance between columns: 2000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mmotorized limit stop behindfoot switchTechnische Daten / technical details:Schnittleistung (Blechdicke) / max. cutting capacity (thickness of sheet) 6 mmSchnittlänge / max. cutting length 2035 mmHinteranschlag / arrester behind 1000 mmStänderweite / distance between columns 2000 MmAntriebsleistung / drive capacity 11 kWGewicht der Maschine / weight 3500 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 170 mmplate thickness: 0 mmnumber of rolls: 0 weight of the machine ca.: 0,1 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: / mmplate thickness: / mm: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 220 tchamfer lenght: 3760 mmdistance between columns: 3250 mmcolumn arm: 410 mmram stroke speed: 180 mm/secwork speed: 10.0 mm/secreturn speed: 160 mm/secwork stroke: 275 mmdayligth: 550 mmtable height: 900 mmtable width: 160 mmoil volume: 300 ltr.voltage: 400 Volttotal power requirement: 18.5 kWweight: 12906 kgrange L-W-H: 5100 x 2250 x 2900 mm-------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds-------------------------------------------------- Furnishing:- DELEM CNC control model DA 58T (TouchScreen)- Motorized backgauge with R-axis, on recirculating ball spindles- X = 800 mm R = 250 mm with 2 stop fingers- controlled axes Y1 - Y2 - X - R - C (crowning)- electr. Crowning controlled by CNC- Upper deer foot tool with PS 135.85-R08, system A with quic ...

plate thickness: 1,25 mmShank diameter: 26 mmweight of the machine ca.: 50 kgSheet thickness: 1.25 mmRoller shaft color: 62 mmRoller center distance: 250 mmShaft-Ø: 26Throat Depth: 260 mmDimensions of the Machine:Length: 600 mmHeight: 550 mmWidth: 350 mmWeight: about 50 kgincl. standard rollsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1,2 mm0: 62 mmweight of the machine ca.: 50 kgProducer: SahinlerType: IK 1,2YOM: newShaft Length: 140 mmBordering Capacity: 1,2 mmRoll-Ø: 62 mmThroat Depth: 100 mmDimensions of the Machine (LxWxH): 560 x 220 x 500 mmWeight: 50 kgAdditional information: • Cast iron heavy duty main frame• Forward-backward adjustable sheet support• Easy to carry for workshops• Forward-backward adjustable bottom shaft• Rolls shafts are special steel material• 7 set of rolls standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1270 mmplate thickness: 4,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 2,00 tdimensions of the machine ca.: mManual backgauge with hand crankCutting gap adjustment via handwheelSide gauge and table extensionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting range for steel to: 0,5 - 120 mmcapacity at 100%: 440 A mmcutting medium: PerCut 451 dimensions: ca. 1030 x 680 x 1450 mmweight: ca. 600 kgContour Cut Exact contours and holes in mild steel with a diameter to material thickness ratio of 1:1 (Diameter:material thickness Contour Cut Speed Contour cutting in mild steel with similar quality and up to 50 % higher speed Silent Cut Cutting of mild steel with reduced sound pressure level HiFinox Plasma cutting of stainless steel and aluminium from 1 to 6 mm with significantly less dross Ar/H2 Mix Excellent cutting results thanks to active mixing of single gases for stainless steel and aluminium starting from 6 mm Marking, notching, punching Individual labeling of the materialThe HiFocus 440i neo is one of the most flexible and most powerful high-precision plasma cutting units worldwide. Its wide cutting range from 0.5 mm to 120 mm means  ...

sheet width: 3000 mmplate thickness: 4,0 mmdistance between columns: 3080 mm: max. 1000 mmCutting length: variabel mmcutting gap adjustment: variabel mmconnected load: 11,0 kWweight of the machine ca.: 5,8 tdimensions of the machine ca.: 3,7 x 1,9 x 3,94 mHydraulic guillotine shear with- Control system: Siemens OP7- Cutting gap adjustment- Cutting length adjustment- Shadow line lighting- Support arms- Sheet support system- Sheet conveyor belt- Scrap diverterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 50 t. weight: 1,8 thydraulic: ja round bar steel: 40 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting capacity: 2,5 mm mmthroat: 750 mmround blank diameter max.: ca. 1500 mmweight of the machine ca.: ca. 800 kgincludes on set of new replacement toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1020 mmplate thickness: 2 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 0650 mmcoil weight: 2,00 tcoil internal dia.: 240-270 mmcoil outside - diam. ca.: 1500 mmexpansion: mechanisch brake: über Motor speed: 5 m/mintotal power requirement: 0,55 kWweight of the machine ca.: 0,590 tdimensions of the machine ca.: 1,40 x 0,80 x 1,10 mMax. 650 mm without hoop-feeding armsControl system missingTemporarily connectedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

chamfer lenght: 1530 mmplate thickness: mmdistance between columns: 1530 mmpressure: 40 tstroke length max.: 300 mmtravel -x axis: 500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

chamfer lenght: 3020 mmplate thickness: mmdistance between columns: 2555 mmpressure: 220 tstroke length max.: 350 mmtravel -x axis: 750 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 3050 mm: 06,5 mm: -: 0,5-2,5 °: 1000 mmwork height max.: 770 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Smallest bending diameter 640 mm- Pressing force against upper roll 5800 kN- Conical bending attachment- Central lubrication- Equipped for change rolls 570 / 500 / 430 mm

sheet width: 2540 mmplate thickness: 2,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 1,60 tdimensions of the machine ca.: mManual back gauge up to 550 mmSide gauge and table extensionsSharpened bladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2540 mmplate thickness: 2,50 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 2,00 tdimensions of the machine ca.: mMotorized backgauge with flip-up stops, up to 1500 mmMultiple program sequences with varying bending angles and stroke heights possibleMultibend 2000 control systemGround bending beamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 1650 mmmaterial thickness: 3,00 mmno. of straightening rolls: 21 Control: sheet thickness - min.: 0,50 mmdiam. of the rolls ca.: 50 mmbetween stands ca.: 1720 mmrun-in height: 1250 mmtotal power requirement: 45 kWweight of the machine ca.: 24,50 tdimensions of the machine ca.: m6-HIGH LEVELER / Strip Leveler / with Quick-Change System- 18 Back-up Supports- Digital Roll Adjustment (0.01 mm resolution)- Gearbox renewed in 2021- Quick-Change SystemThe quick-change system is mounted on a sliding plate. This sliding plate—on which the leveling rolls as well as the entire back-up support assembly are mounted—can be extended, allowing for quick and easy roll replacement in an easily accessible position.The extension and retraction of the sliding plate are hydraulically actuated. Connection to the drive mechanism is automatic.- Intermediate RollsThe intermediate rolls preve ...

round bar steel: 32 mmsquare edge steel: 60 x 6 mmL-beam: mmpressure: 50 tstroke: 10 - 28 mmtotal power requirement: 4 kWweight of the machine ca.: 1 tdimensions of the machine ca.: 0,65 x 1, 2 x 1, 67 mMaximum pressing force 50 tFLAT STEEL SHEAR PERFORMANCEFlat steel: 150 x 15 mm or: 180 x 18 mmPERFORMANCE OF PROFILE STEEL SHEARS Steel 90°: 80 x 8 mm 45°: 50 x 6 mmAngle steel 90°: 100 x 10 mm 45°: 50 x 6 mmPERFORMANCE OF BAR STEEL SHEARS Round steel: 32 mmSquare steel: 30 x 30 mmPERFORMANCE SQUARE NOTCHER: 60 x 6 mmSheet metal up to: 10 mmNotch width: 42 mm:Notch depth: 55 mmPERFORMANCE HOLE PUNCHPunching force: 50 tStroke: 10 - 28 mm Punches:27 in 14 mmProjection: 155 mmGENERAL DATADrive power: 4.0 kWOil capacity: 40 lDimensions L x W x H: 650 x 1200 x 1670 mmWeight approx.: 840 kg Translated with DeepL.com (free version)The data for this ad was created with ModulMWS - the softwar ...