trabalho de chapa metálica usadas para venda (3,320)

Oferta 25176 Especificações: - largura máxima de trabalho 2040 mm - capacidade máxima de corte St 40 5 mm - Redução do ajustamento das lacunas - Número de retenções hidráulicas 11 pcs - Calibre traseiro do motor 10 - 700 mm - Ângulo de paragem dianteiro - Taxa de curso dependendo do ângulo de corte e comprimento de corte 7 - 17 rpm - Acionamento hidráulico 400 V / 7,5 kW - Altura da mesa 840 mm - Espaço necessário, incluindo bitola traseira, sem braços de apoio dianteiros -ca. L 2500 x A 1450 x P 1650 mm - Peso aprox. 3500 quilogramas - com: - Interruptor E-foot - Iluminação da linha de corte

Key data: 2000 mm, 3 mm

Ajuste do comprimento de corte, pedal, sem parar A máquina é reparada, verificada, limpa por um profissional e, em seguida, é totalmente funcional. O teste é realizado (ou no estado existente por 3.500 €) Largura da folha: 2000 mm Espessura da chapa de aço: 3,0 mm Cor: branco Peso da máquina: 2500 kg Dimensões: 2800 x 1800 x 1500 mm com redução do ajustamento das lacunas Tensão ligada: 16 A Hold-down: hidráulico Projeção da coluna: 250 mm Projeção: 60 mm Ângulo de corte fixo Número da máquina: 2892

Desbobinador Peso da bobina: 2 x 4,5 tonelada Largura máxima do material: 520 mm Diâmetro exterior da bobina: 1800 mm Faixa de expansão: 460 - 525 mm Nivelador / Endireitador Largura do material: 30 - 500 mm Número de rolos de nivelamento: 11 pcs. Diâmetro dos rolos de nivelamento: 90 mm Número de rolos de arrancamento: 4 pcs. Diâmetro dos rolos de arrancamento: 90 mm Espessura do material: 0,8 - 5,0 mm Velocidade de alimentação: 3 - 30 m / min

sheet width: / mmplate thickness: / mmdistance between columns: / mmtotal power requirement: kWweight of the machine ca.: 3,4 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 30 mmsquare edge steel: 25 mmL-beam: 28 x 10 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tube diameter stainless steel: bis 42 x 2,0 mmtube diameter steel: bis 42 x 3,0 mmbending angle max. +/-: 180 + 10 °section modulus: 4,1 ccmoperating pressure: 6 bartotal power requirement: 5,5 kWweight of the machine ca.: 3 tdimensions of the machine ca.: 6100 x 2300 x 1300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mmplate thickness: 13 mmtotal power requirement: kWweight of the machine ca.: 8,6 tdimensions of the machine ca.: m- thickness at max. cutting length: 1 3 mm (mild steel 6 mm, high grade steel)- Specification:- backstopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 4-28 mmbending radius min.: 1,5 x D - 2,0 x D mmControl: Siemens LOGO delivery rate: 4,5 l/minbending angle max. +/-: 190 °nominal pressure: 250 baroperating pressure: 3095 bardelivery rate: 4,5 l/mintotal power requirement: 1,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting width: max. 4200 mmCutting depth: 3-300 mmweight of the machine ca.: 8,6 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 6040 mmplate thickness: 4 mmtotal power requirement: 12 kWweight of the machine ca.: 22 tdimensions of the machine ca.: m- Specification- backstop- Roller trayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2000 mmy-travel: 500 mmz-travel: 500 mmControl: Siemens 840 D feeds - fine adjustment: 1-8000 mm/mintable-size: 2120 x 500 mmtable load capacity: 2000 kprapid traverse X-axis: 40 m/minrapid traverse Z-axis: 20 m/mintool taper: HSK 63 A spindle turning speed - stepless: 0-15000 U/minspindle motor: 20 kWspindle bearing diameter: 70 mmtool diameter: 63 /126 mmtool magazin:: 40 Stkweight: 12 ttotal power requirement: 65 kVAweight of the machine ca.: tdimensions of the machine ca.: m- accessories: chip convejorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 2500 mmsheet thickness - max.: 32 mmsheet thickness - max.: 39 mmsheet thickness - min.: 8 mmbale length: 2700 mmnumber of straightening: 7 Rollersnumber driven straightening rollers: 5 Stkstraightening roll diameter: 290 mmdiameter of input / output straightening rollers: 345 mmnumber of support rollers: 13 Stkdiameter of support rollers: 288 mmstroke of upper beam: 120 mmstraightening feed: 16 m/minrated power of main drive: 90 kW: 138 kwweight: 79 t- max. sheet thickness( St 50): 32 mm- max. sheet thickness( St 34): 39 mm- min. sheet thickness( St 50): 8 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 0,5...5 mmsheet width: mmpunching force: 20 ttravel -x axis: 1250 mmtravel -y axis: 750 mmnumber of strokes: 20 per minram stroke max. - stepless: 40 mmtotal power requirement: 14 kWweight of the machine ca.: 5 tdimensions of the machine ca.: mpressure: t- max. thickness: 0,5 … 5 mm- travel in X : 1250 mm enlargeable to 2000 mm- travel in Y axis: 750 mm enlargeable to 1000 mm- number of strokes: 20 per min- stroke: 40 mm - Stanz- Ø 100 mm 1,5 mm-( punch diam. and thickn.) Ø 50 mm 3,5 mm Ø 16 mm 12,0 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 4-28 mmtotal power requirement: 1,5 kWweight of the machine ca.: tdimensions of the machine ca.: m- bending type: 4-28 mm- bending angle: 190° (ohne Rohr)- bending radius: 1,5 x D – 2,0 x D- nominal pressure: 250 bar- operating pressure: 3095 mm n. re.- delivery rate: 4,5 l/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

band width: 850 mmtotal power requirement: 3,8 kW5 to. Schleicher reel- max load: 5 to- Belt width: 1500 mm- Belt thickness: 1 mm- Year of construction: 23/04/92- Voltage: 24/380 V 50 Hz- Power: 3,8 KWIncluding: Coil lifter, feed unit, control panel, hydraulic unit, control cabinetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 16 mmdistance between columns: 60 mmtotal power requirement: 30 kWweight of the machine ca.: 13,2 tdimensions of the machine ca.: m- thickness at max. cutting length:16 mm(mild steel 12 mm high grade steel)- cutting length: 3100 mm- cutting angle: max. 2° 25 - depth of gap of standards: 60 mm- rear stop behind blades: 01100 mm- backstop Motor. motoric blade gap adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bending angle max. +/-: 180 + 10 °tube: 4100 mm- Round tube steel up to 30 x 2.2 mm ²- Round tube stainless steel up to 30 x 1.5 mm- Square tubes 20 x 2.5 mm- Bending time 90 degrees: 1.5 sec (feed)- Length feed speed: 450 mm- Radius range max 125 mm- Free-standing bending head 850 mm long- Bending axis drive electrohydraulicThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

band width: 200 mmband speed: 20 m/min: 150 kg- Internal clamping range: 200- 550 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1020 mmplate thickness: 2,5 mmdistance between columns: 1045 mmdaylight opening: max. 47 mmbending angle max.: 135 °weight of the machine ca.: 290 kgdimensions of the machine ca.: 1,35 x 0,86 x 1,17 mUnused exhibition machine at a special price:Sengmentable upper rail, upper clamping foot-operated, manual bending clampingoperate. The bending performance refers to 380 N/mm² strength.This is an exhibition machine at a special price, so we are selling it without any warranty.Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacidade máxima de puncionamento e cisalhamento: 400 kN Por exemplo, perfura furos de 20 mm em aço de 15 mm Tesouras na tesoura plana de aço em aço de 120 mm a 12 mm Outros dados técnicos a pedido Com uma variedade de selos e matrizes conforme desejado

largura da folha: 700 mmespessura da placa: 4,0 mmdistância entre colunas: 720 mmdiâmetro dos rolos superiores: 95 mmnecessidade de potência total: 1,1 KWpeso da máquina ca.: 0,37 tdimensões da máquina ca.: 0,95 x 0,76 x 1,25 mm

diameter: -- mmworkpiece length: -- mmwork piece width: 15 mmrange of angles: 15-50 °plate thickness: 6-40 mmtotal power requirement: 1,5 kWFeed speed: 3,5 m/min.dimensions: 530 x 395 x 860 mmweight of the machine ca.: 94 kgThe UZ15 RAPID machine is one of the fastest beveling machines withautomatic feed on the market. It is not only suitable forworkshops, but also for assembly work. It has a steplessBevel angle adjustment system. Also, the machine with an automaticfeed equipped. Working with the UZ15 Rapid is therefore very convenient.- For conventional steel (up to a strength of 600 MPA/87022PSI), brass, copper and aluminum materials- For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm- Application range of sheet thickness 6 - 40 mm- The bevel angle can be easily adjusted from 15° to 50° continuously withoutthat a part needs to be replaced- Double-sided bevel (X ...

tube diameter: 60 mmwall strength: 3 mmbending radius min.: 2 x Rohr-Ø ÷ R200 mmbending angle: 0 - 180 °gas tube pipelines: 2 (60.,3mm) mmspeed: stufenlos 0,5 - 2,0 total power requirement: 1,5 kWweight of the machine ca.: 0,7 t- Powerful mandrel bending machine up to 2 gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length)- Electromechanical drive of the bending axis- hydraulic clamping- mandrel feed / extract- 30 programs x 9 bending angle + correction angleThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working width: 950 mmworkpiece width - max.: 1,0 - 50 mmsandingbelt width: 970 mmsandingbelt length: 1900 mmweight of the machine ca.: 1,8 tThe SMD 123 RE is a universal entry-level machine for all-round deburringUniform edge rounding and surface grinding of sheet metaldry process. Suitable for processing steel, stainless steel and aluminium. The non-slip conveyor belt enables safe transport and theMachining even of small workpieces. The two rotor heads ensure an all-round uniformEdge rounding and a directionless finish. The intuitive operation via touch panel allows every employeeget to grips with the machine quickly. The SMD 1 models are installed and ready for operation in a short time. The compact design saves valuable production space. Low acquisition and operating costs lead to shortamortization periods and guarantee economical processing of yourworkpieces.consisting of:- Grinding  ...

x-travel: 1200 mmy-travel: 600 mmz-travel: 600 mmControl: Heidenhain iTNC 530 spindle speed:: 6000 1/min.spindle taper: 50 SKspindle drive: (S1) 10 kWtable surface area: 1300 x 600 mmtable load: 1200 kgfeed speeds: 1-10000 mm/minrapid travel x/y/z: 20/20/15 m/mindistance table - lower edge spindle: 125-725 mmtotal power requirement: 25 kVAweight of the machine ca.: 7,5 tdimensions of machine: 3600 x 2300 x 3000 mmEquipped with: CNC control Heidenhain iTNC 530 Electr. portable handwheel Spindle oil cooler Tool changer 24-pos., double arm changer- Max. tool diameter 80/150 mm- Max. tool length 250 mm- Max. tool weight 8 kg Preparation for hydraulic machine vice Preparation for 3-D measuring probes Chip conveyor Coolant system, coolant through spindle 20 bar Machine documentationWorking hours (date 1st. November 2024):- Control on: 60.818 h- Machine on: 59.598 h- Program cycle: 22.283 h- Sp ...

sheet width: 3100 mmplate thickness: 50 mmpre-bending: 40 mmtotal power requirement: kWweight of the machine ca.: 40 tdimensions of the machine ca.: 6,7 x 3,0 x 3,0 m4-ROLL Hydraulic Plate Rolling MachineWorking length 3100 mmMaximum thickness Pre-bending 40 mmBending 50 mmYield Point: 240 N/mm2Number of rolls 4Motor Power 55 kWMin. diameter mm - Ø Top Roll Diameter x 3Top roll Ø 540 mmBottom roll Ø 510 mmSide roll Ø 440 mmLength 6700 mmHeight 3000 mmWidth 3000 mmWeight 40.000 kgWith:Cone bending deviceInduction hardened rollsDigital readout for side rollsFully welded steel (St-52) frameSeparate moveable control panelDual bending speedsElectronic ParallelismAll rolls are mounted in spherical roller bearingsHydraulically opened/closed drop end controlled from control panelActivation of cone rolling function and position adjustment via buttons onthe control panelCentral rolls ...

largura da folha: 1000 mmespessura da placa: 3,3 mmdistância entre colunas: 1050 mmdiâmetro dos rolos superiores: 90 mmnecessidade de potência total: 1,1 KWpeso da máquina ca.: 0,39 tdimensões da máquina ca.: 1,4 x 0,9 x 1,2 mmMáquina de dobra de chapa metálica com dimensões especiais:- Capacidade 700 x 4 mm- Dobra cônica- Rolo superior oscilante- Dispositivo de segurança de liberação de emergência- Documentação- 400V

sheet width: 700 mmplate thickness: 4,0 mmdistance between columns: 720 mmdiameter of upper rolls: 95 mmtotal power requirement: 1,1 KWweight of the machine ca.: 0,37 tdimensions of the machine ca.: 0,95 x 0,76 x 1,25 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 10 tworkpiece diameter: 320 - 3200 mmdrum diameter: 300 x 120 mmfeed: 100 - 1000 mm/mintotal power requirement: 1,1 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

largura da folha: 5 mmespessura da placa: 1000 mmdistância entre colunas: mmnecessidade de potência total: 4 kWpeso da máquina ca.: 2,8 tdimensões da máquina ca.: m