extrusoras usadas para venda (344)

Screw Diameter: 160 mm // Output Capacity: 1400 kg/h

Compounding extrusion lines

Maximum Diameter: 800 mm // Minimum Diameter: 280 mm

Screw Diameter: 100 mm // Output Capacity: 600 kg/h

Extrusion line for drip irrigation

Screw Diameter: 27 mm // Throughput: 100 kg/h

Screw Diameter: 65 mm // Output Capacity: 170 kg/h

Screw Diameter: 140 mm // Throughput: 900 kg/h

Materials: PP // Film Width (Max): 1600 mm

Number Of Screws: 1 // Screw Diameters: 88

Screw Diameter: 75 mm // Throughput: 700 kg/h

Materials: LDPE, LLDPE, HDPE // Film Width (Max): 2100 mm

Materials: PET, APET, RPET, GRG, GAG, G-PET, PS, PP // Film Width (Max): 700 mm

Maximum Diameter: 110 mm // Minimum Diameter: 32 mm

Materials: PVC // Film Width (Max): 1000 mm

Materials: LDPE, LLDPE, m-LLDPE, MDPE, HDPE, EVA, EVOH, Nylon 6, Co-Nylon, PLA // Film Width (Max): 2800 mm

Key data: 120 mm

Máquina de moldagem por sopro por extrusão BEKUM BA 200 – 500 kg/h – cabeça de acumulação de 8L À venda: máquina de extrusão Bekum modelo BA 200, ideal para processamento de PE e fabrico de peças sopradas de grande capacidade. Características principais • Marca / Modelo: BEKUM BA 200 • Ano: 1990 • Tipo: Soprador de extrusão por acumulador • Altura de acumulação: 8 litros • Número de cabeças: 1 • Número de estações: 1 • Material processado: PE • Capacidade de produção: até 500 kg/h • Número de extrusor: 1 • Diâmetro do parafuso: 120 mm • Rácio L/D: 24 • Controlo de espessura: Sim • Alimentação de material incluída Unidade de fecho • Curso inicial: 710 mm • Força de fixação: 800 KN • Dimensões da placa: o Comprimento: 1600 mm o Largura: 600 mm Máquina robusta reconhecida pela sua fiabilidade, adequada ...

Linha de varas composta por: Sistema de alimentação com funil agitado Extrusor de Werner & Pfleiderer Modelo ZSK Ø53x33D de parafuso duplo Interruptor manual de filtros, modelo CFM75 Cabeça de granulação de haste de 10 fios + 6 fios Aquário de imersão de 4 M TI400/4 Secador Periplast Granulador Exibição

KAUTEX KCC30 Máquina de Moldagem por Soprar por Extrusão Ano: 2012 Horário de funcionamento: 33.000 h 1 estação Força de aperto: 300 KN Diâmetro do parafuso: 90 mm Cabeça de acumulação de 4 kg (HDPE) Dimensões da placa: 530 x 700 mm Distância entre as placas 1000 mm Dimensões máximas do molde: 870 x 650 x 765 mm Sistema de controlo Comando de Blow Tipo de cabeça: Cabeça vertical com acumulador hidráulico Volume máximo do recipiente: 30 litros Diâmetros dos chips: 90, 150, 170, 190 ou 220 mm Pressão máxima: 220 bar Consumo de ar: 95 m3/h Ar de pressão: 6 - 10 bar Potência instalada: 20 KW Número de zonas de temperatura: 5

Key data: 60 mm, 25

Complete extrusion line for the production of 3-layer PE-Xb, PE-Xc and PE-RT pipes Year of Make: 2001 Available diameters: 14 x 2 / 16 x 1.5 / 16 x 2 / 17 x 2 / 18 x 2 / 20 x 2 / 25 x 2.3 Line speed: approx. 35 m/min Description: Single Screw Extruder Battenfeld BEX 1-60-30B Capacity: 200 kg/h (for PE-X) AC drive Bimetal screw and barrel: 60 mm, L/D = 25 (renewed in 2025) BMCtouch (PC has been replaced with a new one) Integration of BEX co-extruders Integration of scales and gravimetric dosing unit (DOS-3) Melt pressure and melt temperature sensor Material hopper Nozzle adapter 2 x Co-extruder Battenfeld BEX E 30.1 KSY1 x 25D Capacity: 18 – 20 kg/h (for EVOH and adhesion promoters) Nozzle Head PE-X-50 Co-extrusion ring for EVOH and adhesion promoters Vacuum Calibration V2-63 VA – 9 m Electromotive length adjustment Measurement and control of wat ...

EREMA 1109 TVE PLUS, Complete regranulation line for LDPE LLDPE HDPE PP PS, Throughput rate 400-500 kg /h depending on materials, Including:, loading conveyor belt, tunnel metal detector, compacting unit, extruder with 90 mm.screw Ø, double piston, backflush screen-changer, double degassing unit,, water ring pelletizer, stainless steel centrifugal dryer, closed cycle water flow, electric cabinet for full management, 44.500 worked hours, in production, Users manuals, CE compliance declaration, Electrical drawings available, capacity: 400-500 kg/h depending on materials, conditions: very good conditions - now disconnected , type: compact line from scraps to granule, highlighting: The Erema lines are particularly appreciated for the high efficiency production/consumption and for the screening which happens before degassing.

EREMA INTAREMA 1309 TVE plus SD, Complete regranulation line for LDPE LLDPE HDPE PP PS, Throughput rate 480-750 kg /h depending on materials, Including:, loading conveyor belt, tunnel metal detector, compacting unit, extruder with 90 mm.screw Ø - first part of screw is in new plasma welding., double piston, backflush screen-changer, double degassing unit,, water ring pelletizer, stainless steel centrifugal dryer, closed cycle water flow, electric cabinet for full management, 3 years of work (26.365) hours with commercial LDPE washed and dried yielding 500-600 kg/h, The line is in very good conditions, Users manuals, CE compliance declaration, Electrical drawings available, capacity: 480-750 kg/h depending on materials, conditions: very good conditions - now disconnected , type: compact line from scraps to granule, highlighting: The Erema lines are particularly appreciated for the high e ...

GALA UNDERWATER PELLETIZER, Type SLC 6, Polymer diverter-valve with hydraulic-pack, die-plate 24 x Ø 3,2 mm ( 5° ), 6-arm knife-holder, By-Pass-System, GALA TWS water-box, heating power 12 kW installed, Water-pump 5,5 kW, GALA Spin-dryer 16,2 BF with 4 kW, Blower 1,1 kW, Siemens Control Cabinet Xantex ( MAAG )

CDM PREALPINA USED EXTRUSION LINE, for HDPE LDPE LLDPE PS PC ABS PP, nominal throughput rate 380 kg/h (depending on material and feeding rate), ABB Main drive 117 KW 380 V 50 H 3Ph (65% used in work), loading hopper, extruder with heaters and vents, fitted with a 105 mm Ø screw 40 L/D, n.1 vacuum degassing pump, semi-automatic non-stop hydraulic screen-changer (200 mm Ø)complete with hydraulic pack, water ring pelletizer, drying centrifuge, electric cabinet, CE compliance, User’s manuals, Electrical drawings, The line is offered either CHECKED or RECONDITIONED to various extents., capacity: 300-430 kg/h nominal

TECNOVA RECYCLING EXTRUDER, mod.Mini 60 mm., for PE PP scraps, throughput rate around 127 kg/h, buffer silo, forced feeding unit, extruder with 60 mm screrw diam., 35,3 kw drive, semi-automatin changer, water ring pelletizer, drying centrifuge, electric cabinet for whole management., Machine offered reconditioned, installed power - used power in work: about 60-65% : 35,3 kw, capacity: 127 kg/h depending on materials, conditions: used,reconditioned, type: single screw PE PP ABS PS PC recycling

TECNOVA RECYCLING EXTRUDER, mod.Mini 60 mm., for PE PP scraps, throughput rate around 127 kg/h, buffer silo, forced feeding unit, extruder with 60 mm screrw diam., 35,3 kw drive, semi-automatin changer, water ring pelletizer, drying centrifuge, electric cabinet for whole management., installed power - used power in work: about 60-65% : 35,3 kw, capacity: 127 kg/h depending on materials, conditions: used, in good conditions

CDM PREALPINA REGRANULATING LINE 130 mm 2xdegassing, for PE PP PS PP PC ABS (it has been working with clean scraps only), extruder with 130 mm. screw Ø 40L/D, including buffer silo with agitators, horizontal extraction screw, crammed feeding unit synchronized to extruder screw, a.c. 283 kw drive, n.2 degassing pumps, semi-automatic screen changer 230 mm diam.screens , water ring pelletizing unit, stainless steel drying centrifuge, vibrating screen, electric cabinet, blower + pipings, vertical mixer, machine reconditioned, can be fitted with a [FIMIC RAS](.germanplast/listings/5241333-refurbished-fimic-ras-400-automatic -screenchager-reconditioned) fully automatic screenchanger, installed power - used power in work: about 60-65% : 435, capacity: 500-600 kg/h, availability: 5 weeks time, options available: fully automatic screenchanger, conditions: refurbished, type: double degassing fo ...

CDM PREALPINA RECYCLING EXTRUDER, Materials PE PP PC PS ABS PA, extruder with 130 mm. screw diam., Constructed in 2006, crammed feeding unit, extruder 130 mm., a.c. 283 kw drive, one degassing pump 5,5 kw, semi-automatic, non-stop hydraulic screen changer 230 mm diam.screens, hydraulic power station, water ring pelletizing unit, drying centrifuge, heat exchanging unit, vibrating screen, electric cabinet, machine reconditioned, installed power - used power in work: about 60-65% : 283, options available: different pelletizer, with or without buffer silo, with blower + bag filling station with vertical mixer, capacity: 500-600 kg/h depending on material and feeding rate, conditions: reconditioned (or as is)