mandriladoras e centros de usinagem usadas para venda (3,171)

throat:640 mmtotal power requirement:1,6 kWweight of the machine ca.:450 kgdimensions of the machine ca.:1000 x 600 x 2100 mtable-size:455 x 380 mmchuck::MK 3 working area:355 x 280 mm

x-travel:630 mmy-travel:560 mmz-travel:560 mmweight of the machine ca.:6,5 tNumber of axles:5 St.spindle turning speed range:18.000 U/minnumbers of tools in magazin:24 tool taper:SK 40 Round TableB-Axis

x-travel:800 mmy-travel:400 mmz-travel:350 mmtotal power requirement:44 kWweight of the machine ca.:8,8 tdimensions of the machine ca.:6,1 x 4,1 x 3,3 mtool taper:HSK63 number of spindle speeds:36-12.000 Number of tools:2 x 21 St.rotary table diameter:1340 mmTexte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht.Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt.Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt.Copyright © 2005-2026, Josef Weber. All rights reserved.

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 1445 €: 19 mm Weldon : 1 kW: 307 mm: 221 mm: 317 mm: 135 kg: 36 mm: 51 mm: 70 mm: 350 U/min: 6 mmNew PRO-36 AUTO is equipped with unique LED monitoring system that indicates current condition of the drill and givesadditional safety and diagnostic information.Auto Feed Smart Drive System optimizes parameters for each cutting/milling operation, when drill works in automatic mode.The drill controller keeps choosing the most effective working conditions based on the correlation of motor load, feed speedand the range of allowable cutting parameters for a given tool type and hole diameter.It results in extending tool life of both HSS and TCT cutters and enhanced machine performance.Countersinking and working on thin workpieces, when the LED shows that the clamping force is low (flashing green)are possible in manual mode only.A safety strap protects ...

x-travel:800 mmy-travel:460 mmz-travel:510 mmtotal power requirement:20 kWweight of the machine ca.:8 tVertical Processing Centre20kW is the nominal value. The spindle only needs 7.5kW. It looks like 15kW will be enough.

x-travel:560 mmy-travel:450 mmz-travel:450 mmtable surface area:760 x 410 mmturning speed range:8.000 U/mintotal power requirement:20 kWVertical Processing Centre

x-travel:600 mmy-travel:770 mmz-travel:675 mmtotal power requirement:47 kWweight of the machine ca.:13 tTool bore:HSK-A63 numbers of tools in magazin:40 including additional tool magazine ZM 182 1 spindle , 5 axesTexte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht.Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt.Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt.Copyright © 2005-2026, Josef Weber. All rights reserved.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 12570 €: 241.34 €: 50 mm: MK 4 : 350 mm: 93 - 152 - 204 - 298 - 44 U/min: 3 kW: M35 : 480 mm: 755 mm: 2265 mm: 435 kg: 0,1 / 0,18 / 0,24 mm/U: 180 mm: 150 mmERLO (MADE IN SPAIN)FOR DEMANDING WORKSHOP USEGear drive3 aut. feedssliding machine tablesolid drill headtiltable turntablefront wheel for sensitive fine feed(sample photo)OPTIONS (PRICES ON REQUEST):lighting equipment Lcoolant equipment and machine base with T-slots ERBReverse for tapping IR/RSThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2907D : prompt, Zwischenverkauf v : Taiwan : 945 €: 1 : 200 mm: 62 mm: 300 mm: 110 kg: 8500 kgMINT CONDITIONwith turning baseaccurate adjustment of clamping force by use of a dialcast iron bodyhardened and ground slidewaysvice jaws made of special hardened alloy steel are precision ground(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel:600 mmy-travel:700 mmz-travel:60 mmtool taper:SK40 magazine place:30 Stücktable surface area:630 mm5axis-CNC-Milling MachineMake: DMGType: DMU 60 PYOM: 2004

bore capacity in steel (diameter):1-13 mmThe machine has a 2.2 kW spindle motor with a 2-stage gearbox for drilling and tapping. Table size is 100 x 50 cm Stroke length approx. 200 mm

x-travel:630 mmy-travel:630 mmz-travel:500 mmnumber of spindle speeds:0 - 15000 spindle motor:32 kWsize of pallet:500 x 500 mmb-axis:36000 x 0,001 °no. of workpieces in the magazine:61 Stücktool taper:HSK 63 weight of the machine ca.:15 tSingle-SpindleMechanical processing cylinder head VR6

x-travel:1000 mmy-travel:800 mmz-travel:1100 mmweight of the machine ca.:20 tdimensions of the machine ca.:6,80 x 3,0 x 3,20 mTool bore:SK50 Tool taper:HSK-A 100 turning speed range:45-6.000 U/minsize of pallet:630x800 mmchange time of pallets:21 secMechanical processing of cylinder heads and cylinder crankcases Machines have been in single-shift operation since 2013 Service and maintenance intervals were adhered to

x-travel:1000 mmy-travel:800 mmz-travel:1100 mmweight of the machine ca.:15,2 tTool bore:SK50 Tool taper:HSK-A 100 turning speed range:45-6.000 U/minsize of pallet:630x800 mmchange time of pallets:21 secMechanical processing of cylinder heads and cylinder crankcases Machines have been in single-shift operation since 2013 Service and maintenance intervals were adhered to

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 5309.85 €: 102.48 €: 18 mm: MK 2 : 240 mm: 30 - 3000 U/min: 0.75 kW: M12 (steigungsabhängig) : 705 mm: 355 mm: 1825 mm: 195 kg: manuell mm/U: 82 mm: 180 - 870 mm: 340 x 280 mm: 100 mmDrilling capacity / normal drilling capacity 18/20 (in E335/ST60)Thread cutting systemControl panel with OLED displayRobust, high quality drill head hood with ergonomically inclined frontLED lightingQuickly adjustable and ergonomic drill depth stopStepless speed control via central rotary knobManual feedEMERGENCY STOP pushbuttonThermal overload protectionSpindle stopDrill protection with electr. FuseConnection cable with Schuko plug3 years warranty for single shift operationOPTIONS:Drill package 3 (vice &, keyless chuck)Coolant deviceLED lighting with pivot armThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle speed::max. 12000 tool taper:HSK 80 .b-axis:360 x 0,001 °worktool support (A-axis):+40 / -95 °weight of the machine ca.:25 500 Kgs.x-travel:800 mmy-travel:700 mmz-travel:630 mmdimensions of the machine ca.:6200 x 3000 x 3200 mmpallet size::500 x 500 mmno. of tools in the magazine:61 Nos.Weight approx.:23,5 tHorizontal Machining Center with CNC Control System SIEMENS 840 C in well maintained condition.Single spindle

x-travel:800 mmy-travel:950 mmz-travel:1020 mmweight of the machine ca.:17 tdimensions of the machine ca.:6 x 3 x 3,2 mDiameter of the table:770 mmmax. table load:800 kgtool taper:HSK-A63 max. tool length:465 mmno. of tools in magazin:60 spindle turning speed range:12.000 U/minfeed power:8 kN kppower capacity:25/35 kW5 axisG550-1024 HSK A-63Grob (Bezeichnung G550-1024)1 spindleTexte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht.Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt.Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt.Copyright © 2005-2026, Josef Weber. All rights reserved.

x-travel:780 mmy-travel:560 mmz-travel:560 mmweight of the machine ca.:10 tNumber of axles:5 St.spindle turning speed range:20-12.000 U/minnumbers of tools in magazin:30 tool taper:SK 40 surface area:500 x 630 mmRound TableB-AxisTexte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht.Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt.Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt.Copyright © 2005-2026, Josef Weber. All rights reserved.

x-travel:700 mmy-travel:630 mmz-travel:700 mmweight of the machine ca.:15 tdimensions of the machine ca.:4,20 x 2,90 x 2,90 mpallet size::500 x 500 mmtool taper:SK 40 Tool taper:HSK-A 63 turning speed range:10.000 U/min

x-travel:2000 mmy-travel:1600 mmz-travel:1140 mmb-axis:0.0001° x 360° °number of pallets:4 table surface area:1000 x 1450 mmmax. table load:6.000 kgturning speed range:4 - 10000 U/minpower capacity at 100 % load:40 kW kWtool taper:HSK100 DIN69893A machine weight ab.:63.000 kgspace required L x W X H:12320 x 11000 x 4700 mmincl. 50 x HSK100 tool tapers

x-travel:760 mmy-travel:760 mmz-travel:760 mmtotal power requirement:43 kWweight of the machine ca.:11,5 tdimensions of the machine ca.:2,7 x 4,73 x 2,87 mmax. table loading capacity:500 kg

: neu : ca. 8 Wochen ab Auftragse : Spanien : 10930 €: 209.86 €: 35 mm: MK 4 : 300 mm: 132-194-277-319-466-666-8 U/min: 1.5 kW: M27 : 755 mm: 480 mm: 2205 mm: 385 kg: 125 mm: 90 - 890 mm: 1250 mm: 400 x 420 mm: 150 mmManual feedGeared driveHardened and ground high quality steel gearsSpeed plate and selecting levers on head frontDepth scale and adjustable depth stopThermomagnetic switchEmergency STOP push buttonSpindle reversing switchWorklightFixed tableSafety drill guard with microswitchCE markOPTIONS (PRICES ON REQUEST): Electronic speed variator with speed digial reader (VE+TAK) A) 66-211 B) 97-310 C) 138-443 D) 160-510 E) 233-746F) 333-1066 G) 440-1413 H) 648-2074 I) 926-2963 Depth digital reader(LBC) Manual tapping system (IR/RS) Manual tapping system for models with variator(IR/RS-VE) Rotating and tilting table(MGI) Coolant equipment with T-slots in the base plate (ERB)ERLO BX- ...

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 1781.01 €: 10 mm: B 16 : 180 mm: 250 - 3000 U/min: 0,45 kW: 400 mm: 248 mm: 460 mm: 30 kg: 50 mm: 105 - 245 mm: 300 x 200 mm: 50 mmContinuous/normal drilling performance 10/12 (in E335/ST60)Manual feedDigital speed displayRobust, high quality and inclined rotation hood for easy speed readingLED lightingQuickly adjustable and ergonomic drill depth stopStepless speed control via central rotary knobEMERGENCY STOP pushbuttonThermal overload protectionUndervoltage releaseDrill protection with electr. FuseConnection cable with Schuko plug (1.2 m)3 years warranty for single shift operationOPTIONS:Machine cabinet with door and drawerDrill package 2 (vice &, keyless chuck)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 3935 : ca. 10 Wochen ab Auftrags : Spanien : 18150 €: 348.48 €: 50 mm: MK 4 : 400 mm: 54 - 1032 (9) U/min: 2.9 kW: M36 : 600 mm: 1200 mm: 2500 mm: 710 kg: 0,1 / 0,2 / 0,3 / 0,4 mm/U: 230 mm: 200 mm: 50 - 850 mm: 1290 mm: 550 x 550 mm: 1060 x 600 mmERLO(MADE IN SPAIN)FOR MANUFACTURING USEHigh quality gear drilling machinecooling equipmentVDE electricchuck protectionleft right drillinglightingfront handwheel for sensitive feedtable turn and tiltableuser manual in GERMANOPTIONS (PRICES ON REQUEST): manual tapping systemIR/IRS electronic speed variator with digital read out VE+TAK digital read out for drilling depth LBCALTERNATIVE:ERLO B-50 VERSION WITH ELECTROMAGNETIC CLUTCH PRICE ON REQUESTThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 Wochen ab Auftragse : 257.02 €: 80 mm: 28 mm: 120 mm: 12 kg[felix] 2.0 Easy and safe drilling operations - Thanks to the innovative machine vice by Felix Röwekamper.The machine vice for freely adjustable clamping of the workpiece.Simple, fast, secure and superior in use. With two hand movements the vice is clamped on the drilling machine table, precisely and safely adjusted.Prism jaws with shoulder and horizontal and vertical holding recesses to clamp a wide range of workpiecesHardened and precision ground clamping jawsNo additional clamping devices necessaryThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 1995 €: 25 mm: 19 mm Weldon : 1.6 kW: M20 : 266 mm: 259 mm: 505 mm: 18 kg: 25 mm: 70 mm: 75 mm: 190 mm: 120-190 / 290-450 U/min: 8 mmThe PRO-72T drilling machine is suitable for hole cutting and tapping applications.Powerful variable speed motor enables milling capacity up to 70 mm (2-3/4”) and drilling capacity up to 25 mm (1”).Machine’s forward &, reverse work modes allow thread cutting up to M20 with Promotech’s new tapping system.Two speed gearbox with continuous speed adjustment allows to set the optimal speed depending on diameter, steelgrade or tool type.Intelligent speed control system maintains constant motor speed regardless of changing loads.Innovative 360-degree LED indicator facilitates proper machine operation and increases work safety.Features and benefits:• powerful motor with heavy duty 2-speed gearbox• Electro ...

: neu : ca. 8 Wochen ab Auftragse : Spanien : 12910 €: 247.87 €: 40 mm: MK 4 : 350 mm: 132-194-277-319-466-666-8 U/min: 2.2 kW: M33 : 755 mm: 480 mm: 2280 mm: 490 kg: 0,1 - 0,2 - 0,3 mm/U: 150 mm: 80 - 880 mm: 1225 mm: 480 x 480 mm: 175 mmAutomatic feed with mechanical clutchGeared driveHardened and ground high quality steel gearsSpeed plate and selecting levers on head front.Depth scale and adjustable depth stopAutomatic tool ejectorEmergency STOP push buttonSpindle reversing switchElectric equipment integrated on machine’s headMachined base with coolant tankWorklightMGI: Rotating and tilting table for model 40Safety drill guard with microswitchCE markALTERNATIVE:VERSION BX.40MIT ELEKTROMAGNETIC CLUTCH PRICE ON REQUESTOPTIONS (PRICES ON REQUEST): Electronic speed variato with speed digital reader(VE+TAK) A) 66-211 B) 97-310 C) 138-443 D) 160-510 E) 233-746F) 333-1066 G) 440-1413 ...

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 4758.02 €: 18 mm: MK 2 : 240 mm: 30 - 3000 U/min: M12 : 355 mm: 705 mm: 1065 mm: 170 kg: 100 mm: 155 - 415 mm: 155 - 550 mm: 340 x 280 mm: 82 mmContinuous/normal drilling performance 18/20 (in E335/ST60), 12 NmManual feedDigital speed and drilling depth displayThread cutting systemControl panel with OLED displayRobust, high quality drill head hood with ergonomically inclined frontLED lightingQuickly adjustable and ergonomic drill depth stopStepless speed control via central rotary knobEMERGENCY STOP pushbuttonThermal overload protectionSpindle stopDrill protection with electr. FuseConnection cable with Schuko plug3 years warranty for single shift operationOPTIONS:Machine cabinet with door and drawerCoolant deviceLED lighting with pivot armDrill package 3 (vice &, keyless chuck)The data for this ad was created with ModulMWS - the soft ...

TNW Super Condor type 40 pillar drilling machine ; automatic version suitable for precise drilling work ; Voltage: 380 volts ; Speed: 60–1350 rpm ; Recording: MK-4 ; Extension: 350 mm ; Table size: 480 x 410 mm Auction-ID: A1-45170-24