mandriladoras e centros de usinagem usadas para venda (3,170)

x-travel:1270 mmy-travel:660 mmz-travel:610 mmtable surface area:1500 x 660 mmtable load:1,3 tcontrol:ULTIMAX 4 turning speeds:10000 1/minspindle:15 kWTool bore:SK 40 rapid traverse:X/Y/Z 30/30/20 m/mintool change unit:24 Pos.total power requirement:30 kVAweight of the machine ca.:9,5 tdimensions of the machine ca.:4,8 x 4,56 x 2,95 mvertical machining center, el. handwheel,chipconveyor,

x-travel:1.500 mmy-travel:700 mmz-travel:610 mmcontrol:HEIDENHAIN iTNC 530 table-size:1.400 x 700 mmtool taper:SK 40 numbers of positions in the tool changer:48 fachspindle turning speed - stepless:15000 1/minrapid traverse:36 m/mintable load capacity:700 kgspindle drive:25 kWtotal power requirement:30 kVAweight of the machine ca.:9,1 tdimensions of the machine ca.:3,7 x 2,65 x 2,9 mvertical machining center,20 bar internal coolant supply with paper filter,3D-touchprobe,chipconveyor,el. handwheelmeter readings:approx. 43.600 h "machine on", approx. 20.000 h "spindle on",

x-travel:1250 mmy-travel:880 mmz-travel:800 mmcontrol: Heidenhain TNC 430 tool change unit:60 Pos.Tool bore:SK 50 turning speeds:8000 1/minsize of pallet:1000 x 800 mmtotal power requirement:56 kVAweight of the machine ca.:14,3 tdimensions of the machine ca.:5,5 x 3 x 3,1 m5-axis machine with controlled universal milling head (B-axis),2-palett changer incl. 2 palets, 1000 x 800 mmProduction package:- internal coolant supply 40 bar with 900l coolant box (2,25 x 1.3 x 2,2m / 950kg),- chipconveyor (4,85 x 1,2 x 1,75m / 600kg),- ROTOCLEAR,- 3D touchprobe RENISHAW MP 10- 60 pos. ATC SK 50- el. handwheel - mech. tool-breakage control,accessories (SK 50 toolholdersapprox. 100.200 h "machine on", approx. 52.200 h "spindle on", last spindle change in 2020

x-travel:700 mmy-travel:700 mmz-travel:700 mmturning speeds:18.000 1/minmax. torque on the spindle:110 / 84 Nmtool taper:SK 40 control:HEIDENHAIN iTNC 530 tool change unit:180 fachsize of pallet:500 x 500 mm mmmax. workpiece weight:600 kgspindle:34 / 28 kWrapid traverse:60 m/mintotal power requirement:68 kVAweight of the machine ca.:10,5 tdimensions of the machine ca.:9,5 x 7,5 x 3,4 mdimensions for transport:4,3 x 2,4 x 2,6 mhorizontal machining center with linear drives,,NC-roundtable,pallet pool RS 10 for totally 12 pallets,monitor for workpiece setting-up device,high pressure coolant through spindle 40bar,internal air blast supply,mode 4,hydraulic clamping 2/4 for workpiece setting-up device and working table,BLUM laser,oilmist suction,3D touch probe TS 649,tool-breackage control, mechanical,SDS spindle diagnosis system,flush gun,el. handwheel,chipconveyor,approx. 112.000 h "machine  ...

x-travel:450 mmy-travel:450 mmz-travel:450 mmweight of the machine ca.:14 tsize of pallet:320 x 320 mmnumber of spindles:2 Double spindle 4-axis machining center Horizontal4 machine platesRenishaw probeControl Siemens Sinumerik 840DWorking space (X / Y / Z): 450x450x450 mmLoad pallet / table max .: 300 kgAcceleration: 10 m / s²Rapid traverse: 60 m / minPallet size: 320 x 320 mmChip-to-chip time: 2.6 sWorkpiece height max .: 700 mmTool holder: HSK 63Tool places: 2x 60Tool spindle: 10,000 rpm, 95 NmSpeed increase to 18,000 rpmInfrared receiver for probe,Make Renishaw Vaf72a0pTool magazine with 60 placesControl panel on the workstationControl panel on the tool installation siteWorkpiece positioning stations can be rotated manuallywith hydraulic workpiece clamping 60 barPneumatic support control on the workstationAutomatic swing gateExtended coolant layer 70 bar / 1500I /VF 250 Coolant Cool ...

x-travel:800 mmy-travel:800 mmz-travel:800 mmturning speeds:12.000 1/mintool taper:SK 50 control:SIEMENS 840D shopmill tool change unit:240 fachsize of pallet:630 x 630mm mmspindle:52 kW / 430Nm total power requirement:87 kVAweight of the machine ca.:15 tdimensions for transport:4,6 x 2,95 x 2,7 mhorizontal machining center,NC-round-table pallet-changer (2 pallets),Internal Coolant Supply 40 bar,prepared for Infrared Touch Probe Renishaw MP 10 without probe,tool-breakage control (mech.),MQL,airblast through spindle,oilmist suction,TRANSMIT funbction,accuracy package,mode 4,glass window right door,incl. FASTEMS FPC 1000 pallet pool for 14 pallets, incl. setting up station, control, and 10 palletsapprox. 98.500 h main switch on apprax. 45.500 Spindle hours

x-travel:800 mmy-travel:950 mmz-travel:1020 mmcontrol:HEIDENHAIN iTNC 530 table load capacity:800 kgtool taper:HSK 63 turning speeds:16.000 1/minspindle:35 / 25 kWtable-size:770 mmmax. torque on the spindle:160 / 223 Nmtool change unit:120 (2x60) Pos.weight of the machine ca.:20 tdimensions of the machine ca.:3,3 x 6,15 x 3,2 m5-axis simultaneously machining center with controlled swivel-rotary table (A/B-axis),milling head horizontal,internal coolant device (10-80bar),oilmist-suction,electromech. tool-length measuring device GROB,chipconveyor,3D touch probe,KINEMATICOPT,BLUM laser,el. handwheel,hour meter: approx. 82.000 h "machine on", approx. 48.800 h "spindle on"

x-travel:700 mmy-travel:550 mmz-travel:500 mmtool taper:SK40 spindle speed max.:12.000 U/minTool changer:30 fach electronic handwheel chip conveyor

x-travel:500 mmy-travel:400 mmz-travel:330 mmcontrol:FANUC 31i B5 tool change unit:21 fachrapid traverse in x-y-z axis:54 m/mintaper ISO:BT 30 turning speed range::10.000 1 / minspindle drive:11 / 3,7 kWmax. table load:300 kgsurface area:600x 400 mmDimensions (L/W/H):1,6 x 2,1 x 2,25 mrapid traverse:48 m/mintotal power requirement:11 kVAweight of the machine ca.:2,1 tvertical CNC-milling-drilling machining center,Infrared Touch probe,el. handwheel,autom. door on right side,no internal Coolant Supply,Approx. 65.500 hours "machine on", approx. 8.200 hours "machine run"

x-travel:1.250 mmy-travel:710 mmz-travel:710 mmtable surface area:1500 x 800 mmtable load capacity:800 kgturning speeds:12000 1/minspindle drive:15 / 10 kWcontrol:MILLPLUS iT HEIDENHAINspindle taper:SK 40 tool change unit:60 Pos.capacity:44 kVAweight of the machine ca.:10,5 tdimensions of the machine ca.:3,5 x 2,65 x 2,65 m5 axis simultaneously machining center,B-axis (-120° / +30°),NC-rotary-table integrated in rigid table,direct measuring system,3D probe infrared, HEIDENHAIN TS 640,internal coolant supply 40 bar, 600l,flushgun,chipconveyor,mode 4,3D quickset software (no hardware),Higher noise in rush on X-axis and roundtable approx. 48.500 hours "machine on" / approx. 18.000 hours "spindle on"

x-travel:800 mmy-travel:800 mmz-travel:800 mmturning speeds:35-10.000 1/minspindle:37 / 30 kWmax. torque on the spindle:525 / 206 NmTool bore:BT 50 rapid traverse:60 m/mintool change unit:160 Pos.size of pallet:500 X 500 mmcontrol:MAZATROL 640M Nexus c-axis:0,001° x 360.000 workpiece weight:1.000 kgworkpiece height max.:1.000 mminterference area:900 mm2 pcs. horizontal machining centers (HCN 6000 + HCN 6000-II, 2008), interlinked with pallet pool (16 pallets) MAZAK FMS,2 pallet changer,chipconveyor,coolant device with internal coolant supply,accessories for both machines: 18 pallets, approx. 300pcs. toolholders, miscellaneous devices for workpiece-clamping...

x-travel:800 mmy-travel:800 mmz-travel:800 mmturning speeds:35-10.000 1/minspindle:37 / 30 kWmax. torque on the spindle:525 / 206 NmTool bore:BT 50 rapid traverse:60 m/mintool change unit:160 Pos.size of pallet:500 X 500 mmcontrol:MAZATROL 640M Nexus c-axis:0,001° x 360.000 workpiece weight:1.000 kgworkpiece height max.:1.000 mminterference area:900 mm2 pcs. horizontal machining centers (HCN 6000-II + HCN 6000, 2005), interlinked with pallet pool (16 pallets) MAZAK FMS,2 pallet changer,chipconveyor,coolant device with internal coolant supply,

x-travel:410 mmy-travel:610 mmz-travel:500 mmturning speeds:15000 1/mintool adaptor:SK 40 control:iTNC 530 HEIDENHAIN smart NC table::320 x 320 mmtable load:100 kgtool change unit:48 Pos.total power requirement:35 kVAweight of the machine ca.:7,4 tdimensions of the machine ca.:4,15 x 3,8 x 3,28 m5-axis simultaneously machining center,NC-round-swivelling table, C-axis 360°, B-axis +30/-120°,chipconveyor,3D touchprobe,internal coolant supply 20bar,el. handwheel,kinematicsopt,meter readings:approx. 9.600h "machine on", approx.3.500h "spindle on"

x-travel:2300 mmy-travel:1200 mmz-travel:600 mmturning speeds:30-10.000 1/minmax. torque on the spindle:254 / 159 Nmcontrol:HEIDENHAIN TNC 430 tool taper:SK 40 tool change unit:60 Pos.spindle:40 / 25 kWfixed working table:surface area:1.100 x 1.100 mmrotary table:1.100 x 1.100 mmrapid traverse:30 m/mintotal power requirement:69 kVAweight of the machine ca.:20 tuniversal machining center with indexing head (2,5°),NC-rotary table, max. table load 1.500kg,internal coolant supply 30 bar, paper filter,el. handwheel,chipconveyor,automatic doors,flush gun,no touch probe available,approx. 81.400 h main swich onapprox. 72.200 h control onapprox. 26.700 h program running on machine under power , for functional testing

x-travel:1000 mmy-travel:610 mmz-travel:600 mmtable-size:1150 x 600 mmtable load capacity:1000 kgrapid traverse X- and Y-axis:24 m/minrapid traverse Z-axis:24 m/minspindle taper::SK 40 spindle turning speed range:10.000 1/minspindle drive:15/22,5 kWtool change unit:30 Pos.CNC-control:SIEMENS 828D operate shopmill distance spindle nose and table:110 / 710 mmweight of the machine ca.:7 tdimensions of the machine ca.:3,2 x 2,2 x 2,7 mvertical machining center,- internal coolant supply 30 bar- chipconveyor- cartridge filter- flat tracks- el. handwheel- prepared for 4th axis- 3D touchprobe RENISHAW OMP 60- indirect measuring system- accessories (approx. 30 pcs. SK 40 toolholders incl. 2 racks, chip tray)approx. 6.000h "spindle on"

x-travel:800 mmy-travel:700 mmz-travel:600 mmtable load capacity:800 kgcontrol:SIEMENS 840D shopmill turning speeds:12.000 1/mintool adaptor:HSK 63 rapid traverse:50 m/mintool change unit:30 Pos.electr. connected load with add. coolant:56 kVAweight of the machine ca.:9,5 ttransport measurements machine:4 x 2,5 x 2,75 m5 Axis simultaneously machining center,Baxis (NC-head) and NC- rotary-swivelling-table dia 900/630mm,internal cooling device 40 bar, 600lprepared for 3D-touchprobe HEIDENHAIN TS 641 (without touchprobe),prepared for el. handwheel (without handwheel),mode 4,approx. 85.000 h mainswich ON , approx. 55.000 h Spindle ON (last spindle change in nJuly 2021 at approx. 50.000h)

x-travel:8500 mmy-travel:2000 mmz-travel:1500 mmrapid travel x/y/z:25 m/mintable-size:10.000 x 1.350 mmtable load:max. 5 t/qmuniversal head:orthogonal 1° x 1° tool taper:SK 50 milling head speed:4.000 1/minpower capacity:37 kWmax. torque on the spindle:900 Nminternal coolant system feed:15 barcontrol:HEIDENHAIN iTNC 530 Tool changer:60 Pos. total power requirement:75 KWdimensions of the machine ca.:12,7 x 5,2 x 4,6 mweight of the machine ca.:35 tuniversal travelling column - universal machining center,orthogonal milling head, water-cooled, with 1° indexing in 2 axis (360 pos. in rear layer, 270 pos. in front layer)3D touch probe M&H 20.41,dividing wall for 2 table machining,internal air blast,15bar high pressure pump,prepared for HSC milling heads incl. torque support,moveable operator-cabin/panel,chipconveyor,handwheel HR 410,controlled security fence,miscellaneous accessories (angle ...

x-travel:750 mmy-travel:600 mmz-travel:520 mmtable surface area:D 700 x 500 mmturning speeds:30000 1/mintool taper:HSK E50 control:HEIDENHAIN iTNC 530 tool change unit:60 pos.rapid traverse:50 m/mintable load capacity - central/maximum:350 kgtotal power requirement:50 kVAweight of the machine ca.:9 tdimensions of the machine ca.:3,2 x 2,65 x 2,8 m5-axis simultaneously HSC-machining center,NC-round-swivelling table B-axis 180°, C-axis 360°,chip conveyor,prepared for 3D touchprobe HEIDENHAIN TS 641 (without touchprobe),mode 4,spindle chiller,no internal coolant supply,approx. 124.200 hours "machine on", approx. 60.600 hours "spindle on" in total

x-travel:1400 mmy-travel:1200 mmz-travel:1350 mmcontrol:MSX- 701 Mapps III table surface area:800 x 800 mmrapid traverse:50 m/mintable rotating:360.000 x 0,001 B-Achse °table load:2,0 tnumbers of pallets:2 turning speed range:8000 1/minpower capacity - milling spindle:37 kWno. of tools in the magazine:60 Stücktool taper:HSK-A 100 weight:31 tdimensions:5,9 x 3,48 x 3,68 mEquipment:- Thru-the-spindel coolant system Mayfran Consep 2000 70 bar with chipconveyor - Helical cutting + Synchronized tapping- Parts program memory 1 MB - Knoll 70 bar high pressure and filter system- Electrostatic oil dust collector LTA- elect. hand wheel- renishaw probe- abso- scale i X/Y/Z- axis- 5 free m- funktions- 48 extra off sets- dual ballscrews on X/Y/Z- axis

x-travel:560 mmy-travel:560 mmz-travel:660 mmcontrol:Celos Siemens 840D SL Operate ERGOline Multitouch turning speeds:20 - 20.000 1/minspindle drive:25/ 35 kWmax. torque on the spindle:86 / 130 tool taper:HSK-A63 Number of tool station:60 diameter of tools max.:70 mmTool diameter with no neighbouring tools:170 mmtool length - max.:450 mmweight of tools max.:12 kgnumbers of pallets:2 Pallet dimension:400 x 400 mmmax. workpiece diameter:630 mmworkpiece height max.:900 mmtable load:400 kgrapid travel x/y/z:60 m/minFeed x/y/z:60 m/mininternal coolant system feed:70 barweight of the machine ca.:8,5 tdimensions:3200 x 4800 x 2900 mmRenishaw probe (spindle):Vorbereitung / preparation only Horizontal machining center with Siemens - Celos control, full b-axis, tool magazine with 123 pos. HSK-A 63, coolant through spindle 40 bar.The machine has just received a new milling spindle.

x-travel:630 mmy-travel:600 mmz-travel:650 mmcontrol:MSC 502 (Fanuc 16) Spindle RPM:12000 1/minspindle drive:22 / 18,5 kWrapid travel x/y/z:32 m/minPallet dimension:500x500 mmnumbers of pallets:2 table load:0,5 tworking diameter:max. 610 mmNumber of tool station:60 BT40max. tool length:360 mmmax. tool weight:12 kgtool changing time:1,3 secB-axis positioning (non continuous):1 total power requirement:50 kVAweight of the machine ca.:14 tdimensions of the machine ca.:3,3 x 5,8 x 3,2 mspindle load monitor:Typ C This horizontal machining center comes with a pallet changer with 2 pallets, and has the following options:ATC 60 tool stations, High pressure coolant trough spindle interface,

x-travel:1530 mmy-travel:530 mmz-travel:465 mmside by side, right side fixed table X =:925 mmside by side left side 2 axis table X =:780 mmcontrol:Heidenhain TNC 640 tool magazin::122 SK 40 spindle turning speed - stepless:12.000 1/minSpindle Torque:120 Nmpower capacity:22 kWFixed Table Dimensions:920 x 540 mmTable load fixed table:2000 kgMax. parts size on fixed table:900 x 500 x 400 mmDiameter of integrated 2-axis rotary table:650 mmTable load rotary table:500 kgB-axis swivel angle:-90°/+110° ° / degMax. parts size on rotary table:600 x 500 x 400 mmMax. Parts size over both tables:1500 x 500 x 400 mminternal coolant system feed:70 bar barweight of the machine ca.:10,5 tdimensions of the machine ca.:3,65 x 2,53 x 2,81 mpendant hand wheel:HR 510 FS Measuring probe for work piece:Blum TC 52 The SpinnerU5 1530 5-axis machine with Heidenhain iTNC 640 control is as new, in excelllent con ...

x-travel:800 mmy-travel:950 mmz-travel:1020 mmcontrol:Sinumerik 840D sl MDynamics Operate turning speeds:10.000 1/minSpindle power:26/20 kWmax. torque on the spindle:340/262 Nmtool taper:HSK-A 100 tool change unit:120 (2x60) Pos.Pallet changer 2x:630 x 630 mmtable load capacity:800 kgweight of the machine ca.:20 tdimensions of the machine ca.:3,3 x 6,15 x 3,2 m6-axis simultaneous horizontal machining center with controlled swivel-rotary table (A/B-axis), Swivel table can swing overhead (180°), that means the part is hanging down overhead and chips don?t accumulate on pallet, they can fall free into the chip conveyorCNC controlled U-axis enables radial movement of tool for variable spindling diamenter.twin pallet changer 630 x 630 mm6 hydraulic couplings for pallet fixture clamping with rotary joint in A and B-axisspecial hydraulic pump for fixturecoolant through spindle (10-80bar), one ...

table length:2200 mmtable width:2500 mmtable load:16 ttotal power requirement:6,5 kWfeed speeds:1,25 - 160 mm/minrapid traverse speed:2000 mm/minlongitudinal adjustment:1500 mmweight of the machine ca.:12 tdimensions of the machine ca.:4,1 x 2,65 x 0,95 mTexte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht.Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt.Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt.Copyright © 2005-2024, Josef Weber. All rights reserved.

x-travel:2500 mmy-travel:1000 mmz-travel:750 mmtable surface area:3220 x 1000 mmWorkpiece weight approx.:3000 kgspindle taper ISO:50 milling spindle turning speeds:20 - 5000 U/minfeed speeds:1- 30000 mm/minrapid traverse:30 m/mintotal power requirement:40 kWdimensions of the machine ca.:6,9 x 4,1 x 3,7 mweight of the machine ca.:21 twith CNC HEIDENHAIN TNC 42630-pockets autom. toolchangerRENISHAW measuring probecoolant attachment with TSC and chip conveyordiverse toolholders

x-travel:600 mmy-travel:580 mmz-travel:530 mmdistance spindle center to column:630 mmdistance spindle center to table:100-600 mmmilling feed range:1-10.000 mm/minmax. table load:200/100 kgmax. tool weight:8 kgpositioning accuracy:+/- 0,01 mm:8000/15000 1/minspindle drive:7,5/11,5 /5,5 kWrepeating accuracy:+/- 0,008 mmweight of the machine ca.:7,4 / 7,65 tBrand-new CNC vertical machining center with CNC control FANUC or HEIDENHAINWarranty: 12 monthsMore information can be found in the Appendix.

spindle diameter:150 mmx-travel:10000 mmy-travel:2500 mmbore spindle stroke:700 mmram stroke:700 dimension of the ram:340 x 340 mmspindle taper ISO:50 Speed of boring spindles:1,25 - 1250 U/min.feed speeds infinitely variable:1 - 5000 mm/minrapid traverse:5 m/mintotal power requirement:120 kWweight of the machine ca.:115 tdimensions of the machine ca.:15,1 x 10 x 6,4 mwith CNC SIEMENS 840 Dsl complete retrofit in 2010FIBRO CNC rotary table 2500 x 2500 mm, 50 to. loading capacity,longitudinal movement 2500 mm,angular milling head 4 x 90°universal milling headfloor plate area ca. 12000 x 6000 mm ( 72 m²)chip conveyor and coolant attachmentaerostatic guideways

x-travel:600 mmy-travel:580 mmz-travel:580 mmnumbers of pallets:2 pallet size::400 x 400 mmmax. workpiece weight:400 kgspindle taper ISO:40 spindle speeds::35 - 12000 feed speeds:1 - 50000 mm/minrapid speed:50 m/mintotal power requirement:25 kWweight of the machine ca.:12 tdimensions of the machine ca.:3,6 x 3,6 x 2,9 mwith CNC SEICOS 16 M ( FANUC base )autom. toolchanger 61-pocketspallet indexing 1°chip conveyor and coolant attachmentexhausterclamping cube and diverse toolholders

bore capacity in steel (diameter):80 mmarm length:2500 mmWORKING RANGE -BORING-:. - drilling capacity full bore (steel):80 mm - throat (max):2500 mm - horizontal travel:2000 mm - vertical travel:1000 mm - sleeve stroke:450 mmWORKING SPINDLE / HEAD:. - spindle revolutions (min):16 /min - spindle revolutions (max):1250 /min - number of gears:16 - spindle diameter:104 mm - taper fixture : MK 6 :. - drive power (max):7.5 kW - max. distance spindle ... clamping surface:2000 mmELECTRICAL SPECIFICATIONS:. - mains voltage:380 V - mains frequency:50 HzDIMENSIONS / WEIGHTS:. - space requirements length:3730 mm - space requirements width:1400 mm - total height:4025 mm - total weight approx.:11000 kgAttachments :- Angular Table 1000 x 800 x 800- Coolant DeviceDescription of condition :SHOWROOM MACHINE

spindle diameter:150 mmx-travel:3000 mmy-travel:2000 mmspindle stroke:700 mmdimension of the ram:340 x 340 mmram stroke:700 column travel:1500 mmspindle taper ISO:50 bore spindle turning speed range:3,2 - 1600 U/mintable surface area:2000 x 2500 mmmax. table load:25000 kgrapid speed:5 / 10 m/minfeed speeds:1 - 5000 mm/mintotal power requirement:100 kWweight of the machine ca.:57 tdimensions of the machine ca.:8,4 x 6,8 x 5,9 mwith CNC SIEMENS 840 Dfull B-axisaerostatic guidewaysfacing head ( 3,2 - 140 rpm )angular milling head 1000 Nmcoolant attahcmnet with internal cooling supply