clamping force: 700 kN injection volume: 103 cm³ screw diameter: 30 mm platen size: 432 x 310 mm closing stroke: 650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping force: 1300 kN injection volume: -- cm³ screw diameter: 45 mm platen size: 470 x 470 mm Condition: used, Specification: Horizontal injection moulding machine, Type: Allrounder 470 S 1300-350 Injection unit: - Screw diameter: 45 mm - Centring ring diameter: 125 mm - Shot weight max.: 210 g (PS) - Injection pressure: 1,840 bar Clamping unit: - Clamping force: 1300 kN - Opening stroke max.: 850 mm - Mould installation height: min. 275 mm - Mould mounting platens: 470 x 470 mm - Operating hours approx.: 91,000 - Core pulls: 1x - Valve gate: 1x pneumatic - Hot runner control points: 12x - Temperature control unit interfaces: 6x (20 mA) - Conveyor belt in the machine - Selector unit. available - Release for high temperature up to 450°C - Communication card for ProSeS interface available - Robot interface available. Technical pr ...
screw size: 30 mm closing pressure: 600 kN total power requirement: 70 kW weight of the machine ca.: t dimensions of the machine ca.: m injection shot weight in Polysterol: g/PS Selogica control Technische Daten / technical details: Schliesskraft / closing pressure 60 to Innenbreite zwischen den Säulen / inner width between columns 370x370 mm Plattengröße / plate size 570x570 mm Werkzeugeinbauhöhe / workpiece daylight 250 mm Formöffnungsweg / mould opening stroke 500 mm Plattenabstand / plate distance 700 mm Einspritzeinheit: / injection device Schneckendurchmesser / screw diameter 30 mm Spritzdruck / injection pressure 247 bar Gesamtantriebsleistung / hole drive capacity 70 kW Gewicht der Maschine ca. / weight ca. 3450 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the ...
Ref. no.: 18239 Hersteller: ARBURG Year of construction: 2000 Clamping unit Clamping force: 100 ton Opening stroke: 575 mm Distance between tie bars: 420 x 420 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 570 x 570 mm Injection unit Screw diameter: 35 mm Injection volume: 144 cm³ Shot weight: 126 g Injection pressure: 1820 bar Measurements and weight Dimensions: 4,3 x 1,65 x 2,1 m Machine weight: 4950 kg Further information: There are 3 screw in the machine. 25-30-35 mm one on the machine others screw will be delivered on a pallet
Referência: 18273 Hersteller: ARBURG Ano construção: 2008 Unidade de fixação Força de fixação: 200 ton Curso de abertura: 650 mm Distância entre barras de amarração: 520 x520 mm Altura do molde min.: 250 mm Largura de abertura: 900 mm Tamanho da placa (h x v): 728 x 728 mm Unidade de injeção Diâmetro do parafuso: 55 mm Volume de injeção : 474 cm³ Peso do tiro: 434 g Pressão de injeção: 1650 bar Medidas e peso Dimensoes: 5,45 x 1,8 x 2,1 m Peso da máquina: 7150 kg
Referência: 18271 Hersteller: ARBURG Ano construção: 2005 Unidade de fixação Força de fixação: 200 ton Curso de abertura: 650 mm Distância entre barras de ligação: 520 x 520 mm Altura do molde mínima: 250 mm Largura de abertura: 900 mm Tamanho da placa (h x v): 728 x728 mm Unidade de injeção Diâmetro do parafuso: 55 mm Volume de injeção : 474 cm³ Peso do tiro: 434 g Pressão de injeção: 1650 bar Medidas e peso Dimensoes: 5,45 x 1,8 x 2,1 m Peso da máquina: 7150 kg
Referência: 18368 Hersteller: ARBURG Ano construção: 1997 Unidade de fixação Força de fixação: 50 ton Curso de abertura: 350 mm Distância entre barras de amarração: 320 X 320 mm Altura do molde mín.: 300 mm Altura máxima do molde: 550 mm Tamanho da placa (h x v): 446 X 446 mm Unidade de injeção Diâmetro do parafuso: 30 mm Volume de injeção: 85 cm³ Peso do tiro: 75 g Pressão de injeção: 2200 bar Medidas e peso Dimensoes: 3,25 x 1,15 x 2,0 m Peso da máquina: 2250 kg
Referência: 18286 Hersteller: ARBURG Ano construção: 2001 Unidade de fixação Força de fixação: 80 ton Curso de abertura: 450 mm Distância entre as barras de ligação: 370 X 370 mm Altura do molde mín.: 250 mm Largura de abertura: 700 mm Tamanho da placa (h x v): 570 X 570 mm Unidade de injeção Diâmetro do parafuso: 35 mm Volume de injeção: 139 cmPeso do tiro: 117 g Pressão de injeção: 2500 bar Medidas e peso Dimensoes: 4,06 X 1,39 X 2,12 m Peso da máquina: 3800 kg
Ref. no.: 18326 Hersteller: ARBURG Year of construction: 2011 Clamping unit Clamping force: 50 ton Opening stroke: 300 mm Distance between tie bars: 370 x 370 mm Mould height min.: 200-400 mm Opening width: 500-700 mm Platen size (h x v): 510 x 510 mm Injection unit Screw diameter: 25 mm Injection volume: 59 cm³ Shot weight: 54 g Injection pressure: 2500 bar Measurements and weight Dimensions: 4,2 x 1,5 x 2,1 m Machine weight: 3740 kg Additional information & extras Core pull: 1 pcs Accumulator: 1 pcs Robot Producer: Sepro Type: SR 55 Year: 2020 Weight: 56 kg
Clamping force: 3200kN, distance between tie bars: 720x720mm, injection unit: 800, screw diameter: 45mm, with documentation. The machine is immediately available, complete and ready for shipment. There are no known defects. The machine has an Arburg Multilift, a parts conveyor belt and the safety fence. The machine is not equipped with the cooking systems (dryer + mixer). The machine is as good as new and was stored directly after leaving the Arburg factory, operating hours max. 100h only test run at Arburg. Machine does not have to be dismantled as it is still in delivery condition. On-site inspection is possible.
Max. closing force: 80t, min. installation height: 200mm, max. opening stroke: 450mm, tie bar distance: 370mm, cylinder diameter: 30mm, connected load: 24.4kW, weight: 3.7t.
Closing force: 500kN, heating output: 4.9kW, connected load: 19.9kW, operational hours counter: 57,024h, with handling and conveyor belts, without dosing device.
Heating output: 5.5kW, connected load: 16.5kW, weight: 2.61t.
Connected load: 62kW, operational hours counter: 77,112h, with Robot MultiLift, an inspection is possible.
Operational hours counter: 62,699h, with documentation, without accessories.
Operational hours counter: 85,318h, with documentation, without accessories.
Clamping force: 500kN, heating output: 9.4kW, connected load: 24.5kW, weight: 3.5t, operational hours counter: 68,747h, with documentation, without accessories.
Connected load: 86kW, operational hours counter: 58,952h, with documentation, without accessories.
Connected load: 51kW, operational hours counter: 72.552h, with documentation, without accessories.
Clamping force: 250kN, heating output: 2.7kW, connected load: 69kW, operational hours counter: 97,696h, with documentation, without accessories, the hydraulic control valve is defective on the closing side.
Clamping force: 250kN, heating output: 4.2kW, connected load: 15.2kW, weight: 2.1t, operational hours counter: 72.811h, with documentation, without accessories.
Distance between tie-bars: 520x520mm, screw diameter: 54mm, pump motor: 39kW, connected load: 44.9kW, weight: 6.63t, operational hours counter: 107,000h.
Screw diameter: 30mm, connected load: 42kW, operational hours counter pump/ automatic: 73,384/ 64,491h, with control software version 3.080, an on-site inspection is possible.
Clamping force: 100t, heating output: 6,1kW, connected load: 35kW, weight: 3.95t.
Clamping force: 1300kN, approach force: 50kN, opening force: 35kN/increased 350kN, opening stroke: 500mm, mold installation height: 250mm. Distance between platens: 750mm, clear column distance: 420mm x 420mm, mold platens: 605mm x 605mm. Movable mold half weight: 650kg, ejector force: 40kN, ejector stroke: 175mm. Screw diameter: 35mm/40mm/45mm, effective screw length: 23/20/18 L/D, max. screw stroke: 145mm, stroke volume: 139cm³/182cm³/230cm³. Shot weight (hp): 127/166/210g, injection pressure: 2500bar/2000bar/1650bar, injection flow: 128/168/212cm³/s, back pressure: 350bar/160bar, screw circumferential speed: 47/53/60m/min. Oil filling: 235l, dimensions X/Y/Z: approx. 4350mm/1600mm/1800mm, weight: approx. 4900kg. Including conveyor belt, Geiger handling, carousel, temperature control units. Operating hours pump/automatic operation: approx. 89000h/83000h. Documentation available. On ...
Injection unit: 1500 T-2 EUROMAP 400 without hydraulic lines. Power: 2000kN, screw diameter: 40mm, nozzle diameter: 2.5mm, effective screw length: 20mm, max. stroke volume: 201cm³, shot weight max. hp: 184g. Hours in automatic operation: 20700h, pump hours: 27800h, cycles: 3.4 million. Documentation available. On-site inspection is possible.
Z-axis: servo-electric, movable transverse to the machine its longitudinal axis, stroke: 1000mm, max. speed: 2m/s, max. handling weight: 5kg (sum of gripper, parts and G-axis), repeat accuracy: +/- 0.1mm. C-axis: pneumatic rotary axis: rotation range: 0°/90°. B-axis: pneumatic, swivel 90° to reduce the stroke of the Z-axis. Stroke extension of the Z-axis: to 1000 mm (for the version with B-axis). G-axis (gripper): Pneumatic drive, stroke length: 50 mm, end positions manually adjustable. Documentation available.
Screw diameter: 55mm, max. injection weight: 434g, max. injection pressure: 1720bar, clamping force: 2200kN, min. installation height: 250mm. Dimension between the platens: 900mm, max. opening stroke: 750mm, centering bore nozzle side/ejector side: 125mm/125mm. On-site inspection is possible.
Clamping force: 350kN, screw diameter: 25mm, tie bar distance: 270mm/270mm, opening stroke: 325mm, min. mold installation height: 225mm, control: Multronica, operating hours: 97325h. Dimensions X/Y/Z: 3700mm/1200mm/1700mm, weight: approx. 1800kg. Including core pull, interface for sprue picker. Card is defective. On-site inspection is possible.
Clamping force: 500kN, screw diameter: 30mm, tie bar distance: 270mm/270mm, opening stroke: 325mm, min. mold installation height: 225mm, control: Multronica. Including core pull and interface for Angus picker. Dimensions X/Y/Z: approx. 4000mm/1200mm/1500mm, weight: approx. 2000kg, operating hours: 38330h.
Clamping force: 400kN, heating output: 5.5kW, connected load: 20.5kW, weight: 4.7t, operational hours counter: 18,287h, an inspection is possible.
Clamping force: 270kN, opening stroke: 325mm, distance between tie-bars: 270x270mm.
Clamping force: 500kN, opening stroke: 325mm, distance between tie-bars: 270x270mm.
Max. clamping force: 350kN, max. opening force: 31.1kN, distance between tie-bars: 270x270mm, weight: 1.8t.
Clamp force: 350kN, heating output: 4kW, connected load: 15kW, weight: 1.7t.
Clamp force: 350kN, heating output: 5.56kW, connected load: 24.1kW, weight: 2.4t.
Clamp force: 850kN, heating output: 5.56kW, connected load: 24.1kW, weight: 2.4t.
Clamp force: 850kN, heating output: 8.4kW, connected load: 9kW, weight: 930kg.
Clamp force: 750kN, heating output: 11kW, weight: 3t.
Clamping force: 500kN, heating output: 5.4kW, connected load: 23.9kW, weight: 2.4t.
Clamping force: 85t, heating output: 5.56kW, connected load: 24.1kW, weight: 2.4t.
There are two identical injection moulding machines available.
Screw diameter: 35mm, clamping force: 50t, including Handling Walldorf, documentation and software.
Max. clamping force: 350kN, screw diameter: 30mm, max. dosing volume: 70cm³, with documentation.
Max. clamping force: 500kN, opening stroke: 350mm, tool installation height: 200mm, heating output: 6.5kW, screw diameter: 40mm, weight: 2.33t, without documentation.