usava ARBURG para venda

There are eight ARBURG Allrounder 220M available.

This ARBURG 320 C 500-100 + Multilift H with B-Axis Injection moulding machine was manufactured in 2003 in Germany. It has a clamping force of 500 kN and a screw diameter of 30 mm. The distance between platens is 550 mm and the opening stroke is 350 mm. In total it operated 64000 pump hours. The injection moulding machine comes with a Multilift H with B-Axis, featuring a handling weight gripper plus part weight of max. 5 kg and a swivel range B-axis of 90 degrees. See original tech specs (DE) attached as PDF below.

This ARBURG Allrounder 570 H 2000-1300 HIDRIVE Injection Moulding Machine was manufactured in 2014 in Germany. It has a clamping force of 2000 kN and is equipped with thermoplastic cylinder of 60mm with long barrier screw (open nozzle 60 mm, nozzle tip radius 15, heating tape for open nozzle). In addition it features a servoelectric mold height adjustment with automatic clamping force control, a central clamping platen set Ø 125 mm, a maximum installation dimension increased to 650 mm and injection pressure increased by 10% (max. 2500 bar depending on screw). See overview of full configuration attached as PDF (DE) below. Important remark: The injection unit is leaking, there is a cost estimate from Arburg for approx. 15,000 euros net including assembly. This defect has not yet been rectified as the machine is not currently being used. The sale does not include the housing, any hoppers ...

This Arburg ALLROUNDER 1200 t 1000 - 400 Injection moulding machine was manufactured in the year 2018 in Germany. It has 58 production hours. The machine has a clamping force of 1000 kN, machine like new, used only for testing. In the current set up, the machine is not CE certified to work stand alone. There is a quote for retrofit the machine to have it CE certified for 3.000€

This ARBURG Allrounder 630S 2500-800 injection moulding machine was manufactured in May 2016. It offers a robust 2750kN clamping force, with a hydraulic drive system and precise control features, including 18 hot runner control zones. Key specifications include 45mm screw diameter, a 318cm³ dosing volume, 2470 bar maximum injection pressure, and a 242 cm³/s injection speed, ensuring high performance and consistent quality in production. Furthermore, its equipped with a Multilift Select robotic system, enhancing automation and efficiency in handling. The ARBURG Allrounder machine we have for sale is tailored for high-volume and intricate moulding operations. It is in very good condition, and has low hours (only 4507 automatic hours) as it was mainly used as technical center machine for sampling and tryouts. Contact us for more information about this injection moulding machine. See origi ...

This Arburg 370 S 600-290 U Injection moulding machine was manufactured in the year 2022 in Germany. It is new, never used and still in original packaging. With a clamping force of 600 kN, 290 injection unit and screw diameter of 35mm (armored, highly wear-resistant screw) it is a compact, fully hydraulic clamping system - ideal for reliable and precise reproducibility in injection moulding operations. The closing unit can be tilted from horizontal to vertical. To be considered that machine comes without position control.

This Arburg 370C-800-250 Injection moulding machine was manufactured in the year 2006 in Germany. It is equipped with an ARBURG SELOGICA control unit. The machine has a clamping force of 800 kN and a screw diameter of 30-40 mm.

This Arburg 370C-800-250 Injection moulding machine was manufactured in the year 2001 in Germany. It is equipped with an Arburg control unit. The machine has a clamping force of 800 kN.

This ARBURG 470C 1500-675 Injection moulding machine was manufactured in the year 2003 in Germany. The machine has clamping force of 1500 kN, a Opening stroke max. of 500 mm and a Mould height of min 250 mm.

This ARBURG Allrounder 520 C 2000-675 Injection moulding machine was manufactured in 2002 in Germany. It is included a pallet protective fence (approx. 100 kg // 2000x1100 mm).

This ARBURG Allrounder 420S 1300-675 Injection Moulding Machine was manufactured in 2004 in Germany. It has a clamping force of 1300 kN and is equipped with a 55mm screw with 2080 bar injection pressure. The open stroke is 575 mm and the mould height is min. 275mm. The machine is controlled by an ARBURG SELOGICA control unit and has operated 53425 hours.

This Arburg Multilift H 720 - 3200 - 1300 Injection moulding machine was manufactured in the year 2005 in Poland and has 42878 production hours. It is equipped with an Arburg Selogica control unit. The machine has a clamping force of 3200 kN and a srew diameter of 60 mm.

This ARBURG ALLROUNDER CENTEX 470 C 1500-800 Injection moulding machine was manufactured in 2007 in Germany. It has a clamping force of 1500 kN, an opening stroke of 650mm and is equipped with an injection unit with 50mm screw diameter. The plate dimensions are 715x715 mm and light between columns is 470 mm. It is still under power and can be inspected on-site anytime.

This ARBURG Allrounder 420 C 1000 - 290 Golden Edition Injection moulding machine was manufactured in 2022 in Germany. It is equipped with a Servo-controlled injection unit which has clear distance between tie bars of 420mm. This injection moulding machine has a clamping force of 1000 kN and features a plasticizing cylinder set of 30 mm screw diameter (without nozzle) in wear-resistant design for processing thermoplastics with corrosive and/or abrasive components, with a low to medium filler content of glass, talc orTiO2. It is included an ARBURG THERMOLIFT 100-3 and Temperature control unit (HB-Therm Thermo-5 HB-140Z1). In total is has operated 619h automatic, 891h pump and 81567 machine cycles. See shot weight specifications per material, nozzle and cylinder temperature guide values in photo gallery.

This ARBURG 320 S 350-150 Injection moulding machine was manufactured in 2001 in Germany. It has a clamping force of 350 kN and a screw diameter of 30 mm. The min. mold installation height is 172 mm and the platen size is 472 x 472 mm. In total it operated 73384 pump hours. See original tech specs sheet (DE) as PDF attached below.

This ARBURG ALLROUNDER CENTEX 520 C 2000-675 Injection moulding machine was manufactured in 1998 in Germany. It has a clamping force of 2000 kN, an opening stroke of 650 mm and is equipped with an injection unit with 55mm screw diameter. The plate dimensions are 715x715 mm and distance between columns is 900 mm. It is still under power and can be inspected on-site anytime.

This Arburg Allrounder 320 KS 700-100 Injection moulding machine was manufactured in the year 2001 in Germany and has 3467 production hours. It is equipped with an Arburg Selogica control unit.

Description: Serial number 161491 Clamping force: 350 kN Mould opening force, max.: 31/100 kN Size of mould platens 400 mm x 400 mm Distance between tie bars 270 mm x 270 mm Mould opening stroke: 325 mm Mould height min.: 225 mm Max daylight: 550 mm Hydraulic ejector - stroke: 125 mm Ejector force forward/backward: 31 kN Screw diameter: 30 mm Ls/D ratio: 20 Injection pressure: 2400 bar Stroke volume: 67 ccm Shot weight, PS: 56 g Injection stroke: 95 mm Screw speed: 10 - 550 1/min Nozzle pressure: 60 kN Nominal capacity of pump motor: 11 kW Installed heating capacity: 3,4 kW Reservoir capacity: 190 ltr. Operating voltage 420 V, 50 Hz Dimension 3300 cX1200 x 1500 mm Weight 1500 kg Approx. Onsite Dimension. (l x w x h): 3,300 x 1,200 x 1,500 mm, weight approx.: 1,500 kg

Description: serial number 137300 Closing force 750 KN Size of mould platens 490 mm x 490 mm Distance between tie bars 320 mm x 320 mm Mould opening stroke: 375 mm Mould height min.: 250 mm Max daylight: 625 mm Hydraulic ejector - stroke: 150 mm Ejector force forward/backward: kN Screw diameter: 40 mm Ls/D ratio: 15 Injection pressure 1150 bar Stroke volume: 188 ccm Shot weight, PS: 158 g Injection rate: 201ccm/s Injection stroke: 150 mm Nozzle pressure: 72,3 kN Nominal capacity of pump motor: 15 kW Installed heating capacity: 5,56 kW Adjustable barrel heating zones: 3 + 1 Dry cycle time: 2 sec Reservoir capacity: 220 ltr. Operating voltage 420 V, 50 Hz Heating 5,56 kW Pump motor 15 kW Total load 20,6 kW Max. fuze rating 80 A Control voltage 24 VDC Dimension 4300 x 1850 x 1600 mm Weight 2400 kg Approx. Onsite Dimension. (l x w x h): 4,300 x 1,850 x 1,600 mm ...

Description: serial numberr 160654 Clamping force 1000 KN Mould opening force, max.: 35 / 390 kN Size of mould platens 545 mm x 545 mm Distance between tie bars 370 mm x 370 mm Mould opening stroke: 500 mm Mould height min.: 250 mm Max daylight: 750 mm Hydraulic ejector - stroke: 175 mm Ejector force forward/backward: 40 kN Injection unit Screw diameter: 35 mm Ls/D ratio: 20 Injection pressure: 1750 bar Stroke volume: 115 ccm Shot weight, PS: 121 g Injection rate: 190 ccm/s Injection stroke: 150 mm Screw speed: 513 r/min. Nozzle pressure: 70 kN Electric and Hydraulic Equipment Nominal capacity of pump motor: 18,5 kW Installed heating capacity: 5,4 kW Reservoir capacity: 240 ltr. Operating voltage 420 V, 50 Hz Total load 24,1 kW Max. fuze rating 80 A Control voltage 24 VDC Short circuit current rating 10 KA Dimension 4230 x 1500 x 1600 mm Weight 3090 kg App ...

Description: Serial nummer 152562 Clamping force: 500 kN Mould opening force, max.: 130 Kn Size of mould platens: 400 x 400 Distance between tie bars: 270 x 270 Mould opening stroke: 325 Mould height min.: 225 Max daylight: 550 Hydraulic ejector - stroke: 125 Ejector force forward/backward: 31 Screw diameter: 30 mm Ls/D ratio: 16,5 Injection pressure: 1290 bar Stroke volume: 70 ccm Shot weight, PS: 58 g Injection rate: 165 ccm/s Injection stroke: 100 mm Screw speed: 62 m/min Nozzle pressure: 60 kN Electric and Hydraulic Equipment Nominal capacity of pump motor: 15 kW Installed heating capacity: 3,9 kW Reservoir capacity:190 ltr.Operating voltage 380 V, 50 Hz Heating 4,0 kW Pump motor 15 kW Total load 19,0 kW Max. fuze rating 80 A Control voltage 24 VDC Short circuit current rating 10 KA Dimension 3700 x 1750 x 2000 mm Weight 1720 kg Approx. Onsite Dimension. ...

Description: serial numberr 177900 Clamping force 400 KN Clearance between columns: 270 mm x 270 mm Board dimensions: 446 mm x 446 mm Mold size: min. 200 mm Maximum opening distance: 350 mm Max distance between plates: 550 mm Screw diameter: 30 mm Injection volume / Injection weight: 70 ccm / 59 grams PS Injection pressure: 1550 bar Engine: 11 kW Heaters: 4.5 kW Operating voltage 400 V, 50 Hz Contrtol voltage 230 V, 50 Hz Total connected load 40,1 kW Control voltage 24 VDC Dimension 2656 x 1850 x 1476 mm Weight 2180 kg Approx. Onsite Dimension. (l x w x h): 2,565 x 1,850 x 1,476 mm, weight approx.: 2,180 kg

Description: serial number 160352 Clamping Force: 1000 kN Distance Betw. Tie-Bars: 270 mm x 270 mm Platen Size: 545 mm x 545 mm Mould Hight: min 250 mm Opening Stroke: 500 mm Max. Open Daylight: 750 mm Screw Diameter: 35 mm / 30 mm Injection Volume: 121 gram PS / 89 gram PS Injection Prresure: 1855 bar / 2350 bar Motor Power: 18,5 kW Heating Power: 5,4 kW Operating voltage 420 V, 50 Hz Heating 5,5 kW Pump motor 18,5 kW Total load 24,0 kW Dimension 4300 x 1500 x 1800 mm Weight 3850kg Approx. Onsite Dimension. (l x w x h): 4,300 x 1,500 x 1,800 mm, weight approx.: 3,850 kg

Description: serial number 193178 Clamping force: 350 kN Size of mould platens 242 mm x 250 mm Distance between tie bars 221 mm Mould opening stroke: 200 mm Mould height min.: 150 - 300 mm Max daylight: 350 - 500 mm Hydraulic ejector - stroke: 60 mm Ejector force forward/backward: 24 kN Screw diameter: 25 mm Ls/D ratio: 20 Injection pressure: 2000 bar Stroke volume: 49 ccm Shot weight, PS: 45 g Injection rate: 54 ccm/s Injection stroke: 100 mm Nozzle pressure: 50 kN Nominal capacity of pump motor: 7,5 kW Installed heating capacity: 4,3 kW Adjustable barrel heating zones: 3+1 Reservoir capacity: 80 ltr.Operating voltage 400 V, 50 Hz Contrtol voltage 230 V, 50 Hz Total rated current 47 A Total connected load 26 kW Control voltage 24 VDC Dimension 2600 x 1500 x 1900 mm Weight 1120 kg Approx. Onsite Dimension. (l x w x h): 2,600 x 1,500 x 1,900 mm, weight approx.: 1 ...

Description: Clamping force: 1,000 kN Screw diameter H: 20 mm Screw diameter V: 18 mm incl. turntable, deposit conveyor, Wittmann handling robot Internal number: A 100/2 2K M2358 SN: 227275 incl. documentation Dimensions: Machine dimensions: (LxWxH): 5100 x 1580 x 2080 mm Turntable + accessories in mesh box Dimensions: (LxWxH): 1200 x 800 x 1120 mm Cabinet in mesh box Dimensions: (LxWxH): 1200 x 800 x 1450 mm Safety fence on Euro pallet Dimensions: (LxWxH): 2150 x 115 x 600 mm Carrier on Euro pallet Dimensions: (LxWxH): 2420 x 1180 x 890 mm Temperature control unit on Euro pallet Dimensions: (LxWxH): 1200 x 800 x Conveyor belt on Euro pallet Dimensions: (LxWxH): Wittmann robot W823-0239 Dimensions: (LxWxH): 2900 x 1500 x 2300 mm Approx. Onsite Dimension. (l x w x h): 0 x 0 x 0 mm, weight approx.: 6,700 kg

Description: Internal number: A 100/1 2K M2357 SN: 226901 Clamping force: 1.000 kN Screw diameter H: 20 m  ,Screw diameter V: 15 mm incl. turntable, deposit conveyor, Wittmann handling robot incl. documentation incl. 1x mesh box with Viper temperature control unit T133137 separator Dimensions: Machine (LxWxH): 5150 x 2100 x 2500 mm 1x mesh box (LxWxH): 1650 x 1150 x 2070 mm  , Approx. Onsite Dimension. (l x w x h): 6,800 x 2,100 x 2,500 mm, weight approx.: 6,700 kg

Description:  , Series No. 166967 closing force ,850 kN max. approach force 37 kN max. opening force 37 kN max. opening travel 375 mm min. mold installation height ,250 mm max. platen distance 625 mm clear tie bar spacing 320 x 320 mm mold mounting platen 490 x 490 mm Injection unit screw diameter 30 mm max. screw travel 150 mm Approx. Onsite Dimension. (l x w x h): 4,300 x 1,900 x 2,000 mm, weight approx.: 2,700 kg

Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Arburg, heating band heating collar -Type: Ø x 40 mm SN 52331 -Heating power: 350 W -Voltage: 230/250V -Number: 1x heating tape available -Price per piece -Dimensions: 200/130/H40 mm -Weight: 0.2 kg

Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Arburg, heating band heating collar -Type: Ø50 x 34mm -Heating power: 310 W -Voltage: 220V -Number: 1x heating tape available -Price per piece -Dimensions: 220/80/H40 mm -Weight: 0.2 kg

Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Arburg, heating band heating collar -Type: Ø65 x 130 mm -Item No.: 27.485 -Heating power: 1050 W -Voltage: 230/250V -Number: 2x heating tape available -Price per piece -Dimensions: Ø105 x 130 mm -Weight: 1.1 kg

Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Arburg, heating band heating collar -Type: Ø65 x 175 mm -Item No.: 14.587 -Heating power: 1400 W -Voltage: 230V -Number: 3x heating tapes available -Price per piece -Dimensions: Ø105 x 175 mm -Weight: 1.4kg

Control, circuit boards, spare parts for Arburg, injection molding machines -Type: ARB 389 D KPL -Weight: 0.5 kg

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Table: comes from an injection molding machine -Make: Arburg -Type: -Dimensions table: 735 x 665 mm -Bore center: Ø 125 mm -Thread holes: M12 -Dimensions: 735/665/H185 mm -Weight: 230 kg

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Table comes from an injection molding machine -Make: Arburg -Type: Allrounder 320-210-750 KN -Dimensions table: Ø 320 mm -Bore center: Ø mm -Dimensions: 320/320/H163 mm -Weight: 20 kg

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Table comes from an injection molding machine -Make: Arburg -Type: Allrounder 320-210-750 KN -Dimensions table: 490 x 490 mm -Bore center: Ø 125 mm -Thread holes: M12 -Dimensions: 490/490/H400 mm -Weight: 236 kg

This Arburg Allrounder 420 C 1300-350 injection moulding machine was manufactured in 1998. It features a clamping force of 1300 kN and offers screw diameters of 35, 40, and 45 mm, allowing versatile moulding capabilities. The machine includes a Schuma conveyor belt and optional Geiger Handling, enhancing operational efficiency. With a robust design and substantial injection pressures, its ideal for precise plastics processing. Consider the Arburg Allrounder machine we have for sale. Contact us for more information.

This Arburg ALLROUNDER 1200 T 800 - 70 Injection moulding machine was manufactured in the year 2017 in Germany and has 2090 pump hours. The machine has a clamping force of 800 kN, is in very good condition, and is well maintained. This Injection Moulding Machine is not CE certified and will be sold without CE Certification. It was part of an automation solution in one production cell. Being sold now as single machine it is ideal to integrate in an existing production line. The buyer is responsible for the required CE certification.

This injection moulding machine, the ARBURG 420C-1000-250, was manufactured in 2001. It is designed to deliver consistent performance and reliability for various plastic manufacturing applications. The machines robust design and ease of operation make it a valuable asset for producing high-quality moulded products. The ARBURG 420C-1000-250 machine we have for sale is well-maintained and ready to meet your production needs effectively. Contact us for more information.

This used injection moulding machine was manufactured in 1999. An ARBURG 420C-1000-250, its designed for precision and efficiency in production. Ideal for a wide range of plastic moulding applications, this machine offers exceptional precision and ease of use. This particular machine represents a valuable addition to any production line. Consider the ARBURG 420C-1000-250 machine we have for sale as a strategic investment in your manufacturing capabilities. For further information, please contact us.

This used injection moulding machine was manufactured in 2001 by ARBURG, a leader in the industry. The model 420 C 1000-250 features a clamping force of 1000 kN and weighs 3180 kg, tailored for precision and reliability in production. Notably, it includes handling for enhanced efficiency, making it an excellent addition to any production line. The ARBURG 420 C 1000-250 machine we have for sale stands as a testament to ARBURGs engineering excellence and durability. For further information, please contact us.

Centering ring diameter on the plate is 160 mm (not the standard 125 mm) This machine was regularly maintained and has CE norms. Type of used material: PBT GF 30 ABS/PA PP Service history: 3.2015 – Replacing the CF card reader with a floppy disk drive 5.2013 – Machine calibration 5.2009 – Machine calibration

Injection weight: 17 g Closing force: 400 kN State: Used Screw diameter: 18 Injection pressure: 2500 Column spacing: 270 x 270 Size of plates: 385x385 Min mold height: 225 Control type: Selogica Tongue: English,Other Installed power: 16.4 Libra: 2040 Dimensions: 1.3 x 3.1 Feed hopper: NO Core String: Yes Robot socket: Yes Air valve: Yes Heating control for molds: Yes

Arburg 520C-2000-675 Shot weight: 240 g Closing force: 2,000 kN Screw diameter: 45 mm Injection pressure: 2500 bar Column spacing: 520 x 520 mm Plate size: 715 x 715 mm Mold height min: 250 mm Type of control: Selogica German Installed power: 44.9 kW Working hours: 126,766 h Weight: 6630 kg Dimensions: 5.6 x 1.7 m Robot nest Air valve

Injection weight: 191 g Closing force: 1,000 kN State: Used Screw diameter: 40 Injection pressure: 2000 Column spacing: 470x470 Size of plates: 650x650 Min mold height: 250 Control type: Selogica Tongue: English German Installed power: 15kW+ 14 Working hours: 36.211 Libra: 5200 Dimensions: 5m x 1.6 Feed hopper: NO Core String: Yes Air valve: Yes Heating control for molds: Yes

Closing force: 250 T Opening stroke: 600 mm Between columns: 630 x 630 mm Tray dimensions: 900 x 900 mm Injection: Screw diameter: 55 mm cm3: 558 Bars: 2380 General: Closing weight: 14 Tons Dimensions length: 6.7m Dimensions width: 2.25m Dimensions height: 2.3m Options: Cores: 1 Robot interface: no Bi metal: yes 2 blow guns

Injection weight: 141 g Closing force: 1,500 kN Screw diameter: 35 Injection pressure: 2000 Column spacing: 520x520 Size of plates: 688x688 Min mold height: 250 Control type: Selogica Tongue: English German Installed power: 33.9 Working hours: 45343 Libra: 6490 Dimensions: 4.9 x 1.7 Feed hopper: NO Core String: Yes Robot socket: Yes Air valve: Yes Heating control for molds: Yes

Closing unit Clamping force [kN] 1300 Dimensions of mounting plates (hxv) [mm] 615 x 615 Clearance between columns (hxv) [mm] 420 x 420 Min./max. mold height [mm] min 250 Injection unit Screw diameter [mm] 45 Injection volume [cm3] 286 Injection weight [g] 240 Injection pressure [bar] 2500 Electrical and hydraulic equipment Rated power of the pump motor [kW] 30 Heater power [kW] 13.8 Dimensions and weight Net weight with control cabinet [t] 4.33

Injection weight: 487 g Closing force: 1,500 kN State: Used Screw diameter: 60 Injection pressure: 1390 Column spacing: 520x520 Size of plates: 700 x 700 Control type: Selogica Installed power: 74 Working hours: 63,600 Libra: 7300 Dimensions: 6 m x 2.4 m Feed hopper: NO

Working industrial used Visible by appointment Material preheater Arburg brand

Control type: SELOGICA TOUCH Number of hours: 35,000 hours Closing force: 80 T Opening stroke: 500 mm Between columns: 470 x 470 mm Tray dimensions: 637 x 637 mm Mini/maxi mold: 250 mm Max distance between trays: 750 mm Injection: Screw diameter: 30 mm Screw length: 23.3/D cm3: 106 Bars: 2500 General: Motor power: 18.5 kW Heating power: 6.4 kW Closing weight: 3.5 Tons Injection weight: Dimensions length: 4 m Width dimensions: 1.3 m Dimensions height: 2 m Options: Cores: 1 Robot interface: YES Bi metal: YES