usava ARBURG para venda

Arburg 320 S 500-150 selogica injection molding machine with a robot Year of production: 1999 Control: Selogica TECHNICAL DATA • Closing force: 500 kN • Clearance between columns: 320 mm x 320 mm • Min form height 225 mm • Max mold height 350 mm • Board dimensions: 446 mm x 446 mm • Opening distance: 425 mm • Max distance. between plates 525 mm • Snail: 30 mm • Shot weight: 65 grams PS • Injection pressure: 2210 bar GENERAL • Engine: 15 kW • Total installed power: 21.3 kW • Dimensions: 3.2 x 1 x 1.8 • Weight: 2250 kg • German language control hours worked 45 970 h number of cycles 8 110 434 pcs Injection molding machine in production all the time As additional equipment, the injection molding machine has an original side manipulator for receiving ingots Regularly serviced, very good conditi ...

Injection weight: 85 g Closing force: 700 kN State: Used Screw diameter: thirty Injection pressure: 2470 Column spacing: 320x320 Size of plates: 476x476 Min mold height: 200 Control type: Selogica Tongue: German,Polish Installed power: 35 Working hours: 59684 Libra: 2350 Dimensions: 3.25 x 2 Feed hopper: NO

Injection weight: 121 g Closing force: 700 kN State: Used Screw diameter: 35 Injection pressure: 1820 Column spacing: 320x320 Size of plates: 476x476 Min mold height: 200 Control type: Selogica Installed power: 35 Working hours: 67623 Libra: 2350 Dimensions: 3.25 x 2 Feed hopper: NO

Horizontal press with the possibility of vertical processing

Closing unit Clamping force [kN] 2000 Dimensions of mounting plates (hxv) [mm] 715 x 715 Clearance between columns (hxv) [mm] 520 min./ max. mold height [mm] 250 / 500 injection unit Screw diameter [mm] 55 Injection weight [g] 310 Injection pressure [bar] 1720 Dimensions and weight Net weight with control cabinet [t] 6.63 Dimensions (L x W x H) [m] 6.00 x 1.50 x 2.40

Closing unit Clamping force [kN] 1300 Dimensions of mounting plates (hxv) [mm] 650 x 650 Clearance between columns (hxv) [mm] 470 x 470 Min./max. mold height [mm] 275 Injection unit Screw diameter [mm] 40 Injection volume [cm3] 182 Injection weight [g] 153 Injection pressure [bar] 2120 Electrical and hydraulic equipment Rated power of the pump motor [kW] 22 Heater power [kW] 10.2 Dimensions and weight Net weight with control cabinet [t] 5.1 Dimensions (length x width x height) [m] 4.45x1.49x2.17 Additional equipment: Dryer Picker

Number of hours: 45,000 hours Closing force: 40 T Opening stroke: 200 mm Between columns: 270 x 270 mm Tray dimensions: 380 x 380 mm Mini/maxi mold: 150/350 mm Max distance between trays: 550 mm Injection: Screw diameter: 18 mm Screw length: 24.5/D cm3: 23 Bars: 2500 General: Motor power: 11 kW Heating power: 4.1 kW Closing weight: 1.5 Tons Injection weight: Dimensions length: 3 m Width dimensions: 1m Dimensions height: 1.6 m Options: Cores: Robot interface: YES Bi metal: YES

Closing unit Clamping force [kN] 1300 Dimensions of mounting plates (hxv) [mm] 650 x 650 Clearance between columns (hxv) [mm] 470 x 470 Min./max. mold height [mm] min 275 Injection unit Screw diameter [mm] 45 Injection volume [cm3] 231 Injection weight [g] 210 Injection pressure [bar] 1680 Electrical and hydraulic equipment Rated power of the pump motor [kW] 30 Heater power [kW] 10.2 Dimensions and weight Net weight with control cabinet [t] 4.41 Dimensions (length x width x height) [m] 4.6x1.6x2.17 Additional equipment: Dryer Picker

Manufacturer: Arburg Model: 100T 420 C 100 - 250 CENTEX Year of manufacturing: 1999 Capacity: 100 Tn

Closing unit Clamping force [kN] 2000 Dimensions of mounting plates (hxv) [mm] 795 x 795 Clearance between columns (hxv) [mm] 570 x 570 Min./max. mold height [mm] min. 300 Maximum opening width [mm] 950 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 392 Injection weight [g] 356 Injection pressure [bar] 2000 Electrical and hydraulic equipment Rated power of the pump motor [kW] 30 Heater power [kW] 14.9 Dimensions and weight Net weight with control cabinet [t] 7.9 Dimensions (length x width x height) [m] 5.53x1.79x2.20

Arburg 470C 1500-350 injection molding machine Year of manufacture: 2005 Clamping force [kN] 1500 Dimensions of mounting plates (hxv) [mm] 650 x 650 Clearance between columns (hxv) [mm] 470 x 470 min./ max. mold height [mm] min. 250 injection unit Screw diameter [mm] 35 Injection weight [g] 127 Injection pressure [bar] 2500 Electric-hydraulic equipment Nominal power of the pump motor [kW] 25 Heater power [kW] 16.9 Dimensions and weight Net weight with control cabinet [t] 4.56 Dimensions (L x W x H) [m] 4.60 x 1.70 x 1.80

Manufacturer : Arburg Model: ALLROUNDER 520C 2000/350 Closing force: 200T Bi-material Year of manufacture: 12/2000

Closing unit Clamping force [kN] 2200 Dimensions of mounting plates (hxv) [mm] 795 x 795 Clearance between columns (hxv) [mm] 570 x 570 Min./max. mold height [mm] 300/650 Maximum opening width [mm] 1050 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 353 Injection weight [g] 322 Injection pressure [bar] 2080 Electrical and hydraulic equipment Rated power of the pump motor [kW] 37 Heater power [kW] 16.8 Dimensions and weight Net weight with control cabinet [t] 8.5 Dimensions (length x width x height) [m] 5.43m x 1.88m x 2.2m Additional equipment: 2 x Conveyor belt Safety cage Wittmann W621-1449 robot (X=590mm, Y=1200mm, Z=2500mm)

Injection weight: 166 g Closing force: 1,000 kN State: Used Screw diameter: 40 Injection pressure: 1530 Column spacing: 420x420 Size of plates: 570x570 Min mold height: 250 Control type: Selogica Tongue: English German Installed power: 46 Working hours: 82631 Libra: 3580 Dimensions: 4.4 x 2 Feed hopper: NO Robot socket: Yes Air valve: Yes

- Operating voltage: 400 V - Control voltage: 230 V - Rated current motor heater: 55 A - Total rated current: 68 A - Total connection: 35 kW - Screw diameter: 30 mm - Clear column distance: 320 mm - Clamping force: 500 kN - Injection unit: 250 - Operating hours: approx. 52,000 - incl. hopper - incl. gripper Machine has light rust. Shipping has to be taken care of by the buyer. Loading transport arm for crane and/or forklift is attached. Machine ready for shipping on pallets.

Injection weight: 17 g Injection weight (second unit): 65 Closing force: 1,000 kN Screw diameter: 18/30 Injection pressure: 2500/2210 Column spacing: 420x420 mm Size of plates: 570x570 Min mold height: 250 Control type: Selogica Tongue: German Installed power: 34.5 Working hours: 61792 Libra: 4000 Dimensions: 4.6x1.8 Feed hopper: NO Core String: Yes Air valve: Yes Heating control for molds: Yes

Machine comes with robot Power : 50 Ton Distance between columns: 320x320 Screw diameter: 30 Calculated injection volume: 70 Min / Max mold thickness: 200 Euromap: 500-100 Moving platen stroke: 350 Working hours: 78.000

Type of control: SELOGICA Number of hours: 8010 H Closing Closing force: 15 T Opening stroke: 200 mm Between columns: 220 x 220mm Tray dimensions: 330 x 330mm Mini mold: 150 mm Max distance between trays: 350 mm Injection: Screw diameter: 22 mm Screw length: 20 L/D cm3: 34 Bars: 2000 General: Motor power: 32 kW Heating power: 4 kW Closing weight: 1.5 Tons Injection weight: 31 g Dimensions length: 3 m Width dimensions: 1 m Height dimensions: 1.50 m Options: Cores: Bi metal: yes 1 dry contact

I have to sell Injection moulding machine Arburg 420M 1996 23500 hours. The machine is great condition with brand new oil 08.2020 Can see to work at anytime.

Arburg 420C-1000-350 with a conveyor belt Year of production: 2001 Producer: Arburg Shot weight: 210 g Closing force: 1,000 kN Screw diameter: 45 mm Injection pressure: 1670 bar Column spacing: 420x420 mm The size of the plates: 570x570 mm Min mold height: 250 mm Type of control: Selogica German Installed capacity: 32.2 kw Weight: 3430 kg Dimensions: 4.4x1.7 m Hopper: No. Core sequence: Yes Robot Socket: Yes Air valve: Yes

Closing unit Clamping force [kN] 2000 Dimensions of mounting plates (hxv) [mm] 795x795 Clearance between columns (hxv) [mm] 570x570 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 392 Injection weight [g] 356 Injection pressure [bar] 2000 Electrical and hydraulic equipment Rated power of the pump motor [kW] thirty Heater power [kW] 14.9 Dimensions and weight Net weight with control cabinet [t] 7.9 Dimensions (length x width x height) [m] 5.53x1.79x2.20

Control: Selogica Closure System: Knee Engine: 7.5 kW Heaters: 5.5 kW Polish language control

Arburg 470S-1300-350 hybrid with electric auger drive Year of production: 2005 Shot weight: 127 g Closing force: 1,300 kN Screw diameter: 35 mm Injection pressure: 2500 bar Column spacing: 470 x 470 mm Plate size: 650 x 650 mm Min mold height: 275 mm Type of control: Selogica German Installed power: 33.9 kW Working hours: 85,400 h Weight: 5.100 kg Dimensions: 5 x 1.8 m Hopper: No. Core sequence: Yes Robot Socket: Yes Air valve: Yes

Arburg 420C-1300-350 with conveyor belt Year of production: 2004 Closing force: 1,300 kN Screw diameter: 50 mm Column spacing: 420 x 420 mm The size of the plates: 605x605 mm Mold height min: 250 mm Type of control: Selogica German Installed capacity: 32.2 kw Weight: 4080 kg Dimensions: 4.4x1.9 m Hopper: No. Core sequence: Yes Robot Socket: Yes Air valve: Yes

Arburg 420C-1300-675 Year of production: 2000 Shot weight: 297 g Closing force: 1,300 kN Screw diameter: 50mm Injection pressure: 2080 bar Column spacing: 420 x 420 mm Plate size: 615 x 615 mm Mold height min: 350 mm Type of control: Selogica German Installed power: 44.9 kW Working hours: 84,840 h Weight: 4330 kg Dimensions: 4.9 x 1.8 m Hopper: No. Core sequence: Yes Air valve: Yes

Condition: Used Operating hours: ca. 5.300 Clamping force (t): 25 Mould installation height min (mm): 150 Mould installation height max (mm): 225 INJECTION UNIT: IU70 Screw diameter (mm): 22 Stroke volume (cm³): 34 Injection pressure (bar): 2000 CONTROL Selogica direct Screen language CZ / DE / EN Total installed power (kW): 24,5 Total weigh (kg): 1580

Condition: Used Operating hours: ca. 19.000 Clamping force (t): 25 Mould installation height min (mm): 122 Mould installation height max (mm): 225 INJECTION UNIT: IU70 Screw diameter (mm): 22 Stroke volume (cm³): 34 Injection pressure (bar): 2000 CONTROL Selogica direct Screen language CZ / DE / EN Total installed power (kW): 25 Total weigh (kg): 1920

Brand: Arburg Model: 370 M 800-225 Tonnage: 80 Year: 1993 Column passage: 370x370 Screw diameter: 40 Calculated injection volume: 188 Min / max mold thickness: 250 Robot interface: Euromap 800-225

Arburg 420C-1000-250 with a conveyor belt Year of production: 1998 Producer: Arburg Shot weight: 97 g Closing force: 1,000 kN Screw diameter: 30 mm Injection pressure: 2470 bar Column spacing: 420x420 mm The size of the plates: 570x570 mm Mold height min: 250 mm Type of control: Selogica German Installed power: 25 kw Weight: 3180 kg Dimensions: 4.5x1.7 m Hopper: No. Core sequence: Yes

Arburg 370cmd year 1988. Machine is ok but needs a pump.

ARBURG 200T 570H-800 I ELECTRIC DRIVE Type of control: SELOGICA Number of hours: 63,160 H Closing force: 200 T Max gap between trays: 1550 mm Injection: Screw diameter: 45 mm Screw length: 20/D Motor power: 77kw Closing weight: 12.8 Tons Options: Cores: 2 Robot interface: NO Bi-metal: Others: 1 air valve, 1 control socket, 1 Euromap 67 robot socket

ARBURG ALLROUNDER Arburg Allrounder 720 S 3200-1300 - Plastic Injection Machine screw size:70 mm injection shot weight in Polysterol:984 g/PS closing pressure:3500 kN core drawing:2 control:Selogica daylight:720 x 720 mm opening stroke:700 mm mould height - Max./min.:300 -700 mm daylight between platens - max.:1000-1400 mm weight of the machine ca.:17,7 t - highly wear-resistant plastification unit - Technology step 3 - hydraulic plant with 3 regulating pumps - Technology step 2 - servo-controlled / two-circuit pump technology - Increased power for heating control circuits 1-6 to 3.6 kW each - clamping force increased to 350 Mp - mould blow unit 1 with pressure reducer - mould blow unit 2 with pressure reducer - Core pull 1 - Core pull 2 - Interface for robot system according to EUROMAP 12 - Host computer interface for ALS with communication node Ethernet

Injection weight: 29 g Closing force: 700 kN State: Used Screw diameter: 20 Injection pressure: 2500 Column spacing: 320x320 Size of plates: 476x476 Min mold height: 200 Control type: Selogica Tongue: German,Polish Installed power: 31 Working hours: 88715 Libra: 2170 Dimensions: 3.25 x 2 Feed hopper: NO

ARBURG 70T 320 KS 700 - 100 INJECTION UNIT Screw diameter: 25 mm Calculated injection volume: 49 cm³ Length / diameter ratio: 20 L / D Maximum injection rate: 88 cm³ / s Pressure on the material: 2240 bars PS plasticization capacity: 41 Kg / h Screw Speed: 37 RPM CLOSING UNIT Closing force: 700 kN Opening stroke: 250 mm Mold thickness Mini / Max: 200/400 mm Max distance between tray: 650 mm Passage between columns: 320 x 320 mm Tray size: 476 x 476 mm GENERAL Heat output: 11 kW Total installed power: 17.9 kW Quantity of oil: 120 l. Weight: 2090 Kg

Closing force: 1300 kN Clearance between columns: 420 mm x 420 mm Board dimensions: 605 mm x 605 mm Mold size: min 250 mm Opening distance: 500 mm Max distance between boards: 750 mm Snail: 35 mm Injection volume: 139 cc / 127 grams PS Injection pressure: 2500 bar Motor: 22 kW Heaters: 8 kW Dimensions: 4.3 m x 1.7 m x 1.8 m Weight: 4300 kg

Arburg 420c 1000-250 Closing unit Clamping force [kN] 1000 Dimensions of mounting plates (hxv) [mm] 605 x 605 Clearance between columns (hxv) [mm] 420 x 420 Maximum opening width [mm] 750 Injection unit Screw diameter [mm] 35 Injection volume [cm3] 144 Injection weight [g] 132 Injection pressure [bar] 1820 Electrical and hydraulic equipment Rated power of the pump motor [kW] 18.5 Heater power [kW] 6.5 Dimensions and weight Net weight with control cabinet [t] 3.18 Dimensions (L x W x H) [m] 4.3 x 1.7 x 1.8

INJECTION UNIT Screw diameter: 35 mm Calculated injection volume: 106 cm³ Length / diameter ratio: 20 L / D Pressure on the material: 2120 bars CLOSING UNIT Closing force: 1300 kN Mold thickness Mini / Max: 225/275 mm Max distance between tray: 800 mm Passage between columns: 470 x 470 mm Tray size: 650 x 650 mm GENERAL Heat output: 22 kW Total installed power: 33.9 kW

Injection Moulding Machine Manufacturer Arburg Allrounder Model 630 S 2500-800 Year 2014 Working hour: 70000 ( March 2023)

Arburg 470C 1500-400 injection molding machine Control: SELOGICA Tool closing system: Closing force: 150 t Clearance between columns: 470×470 mm Maximum table plate dimensions: 650×650 mm injection unit: Screw diameter: 45 mm Injection Weight: 232g Injection pressure: 1580 bar Injection volume: 254cc Equipment: Ejector: hydraulic Closing system: hydraulic 1 x hydraulic core Machine dimensions and weight: Weight: 4850 kg Length/Width/Height: 4.45×1.59×2.08 m Power: Pump/Motor: 18.5 kW Heaters: 9.4 kW Total: 27.9kW

Clamping force [kN] 250 Dimensions of mounting plates (hxv) [mm] 750 min./ max. mold height [mm] 127 - 227 Maximum opening width [mm] 352-542 injection unit Screw diameter [mm] 22 Injection volume [cm3] 34 Injection weight [g] 31 Injection pressure [bar] 2000

Arburg Allrounder 570H 2000-1300 Plastic injection moulding machine No electronic and mechanical issue All maintenance has been done by Arburg service

Arburg Allrounder 570H 2000-1300 Plastic injection moulding machine No electronic and mechanical issue All maintenance has been done by Arburg service

INJECTION UNIT Screw diameter: 35 mm Calculated injection volume: 139 cm³ Length / diameter ratio: 23 L / D Max injection rate: cm³ / s Pressure on the material: 2500 bars Laminating capacity PS: Kg / h Screw Speed: 58 RPM Hydraulic motor torque: 560 Nm Hydraulic Motor Power: HP Nb Temperature Zones: N CLOSURE UNIT Closing force: 1300 kN Opening stroke: 650 mm Thickness Mold Mini / Max: mm Max distance between plate: mm Passage between columns: 470 x 470 mm Tray size: 715 x 715 mm GENERAL Heating power: 22 kW Total installed power: 38 kW Amount of oil: 260 l. Dimension: (WxHxD) m. Weight: 6380 Kg

Arburg 270U 40T closing machine with quality flap 38000 pump hours Spindle D: 18mm Year 2006 Perfect condition and working. Extra: Fasti charger/dryer and two desuperheaters Immediate availability. Dr Boy 22A Machine 18000 pump hours D spindle: 22 year 2004 Perfect condition and working. They sold the two together.

Closing unit Clamping force [kN] 2000 Dimensions of mounting plates (hxv) [mm] 795 x 795 Clearance between columns (hxv) [mm] 570 x 570 Min./max. mold height [mm] min300 Maximum opening width [mm] 950 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 392 Injection weight [g] 359 Injection pressure [bar] 2000 Electrical and hydraulic equipment Rated power of the pump motor [kW] 30 Heater power [kW] 14.9 Dimensions and weight Net weight with control cabinet [t] 7.9 Dimensions (length x width x height) [m] 5.53m x 1.79m x 2.2m Additional equipment: Conveyor belt Single-phase plastic feeder Picker

Closing unit Clamping force [kN] 2000 Dimensions of mounting plates (hxv) [mm] 795 x 795 Clearance between columns (hxv) [mm] 570 x 570 Min./max. mold height [mm] min 300 Maximum opening width [mm] 950 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 392 Injection weight [g] 359 Injection pressure [bar] 2000 Electrical and hydraulic equipment Rated power of the pump motor [kW] 30 Heater power [kW] 14.9 Dimensions and weight Net weight with control cabinet [t] 7.9 Dimensions (length x width x height) [m] 5.53m x 1.79m x 2.2m Additional equipment: Conveyor belt Single-phase plastic feeder Dryer Picker

Clamping force [kN] 2000 Dimensions of mounting plates (hxv) [mm] 685 x 685 Clearance between columns (hxv) [mm] 520 x 520 injection unit Screw diameter [mm] 45 Injection volume [cm3] 286 Injection weight [g] 240 Injection pressure [bar] 2500 Electric-hydraulic equipment Pump motor rated power [kW] 30 Heater power [kW] 14.9 Dimensions and weight Net weight with control cabinet [t] 6.63 Dimensions (L x W x H) [m] 5.35x1.93x2.20

Clamping force [kN] 1600 Dimensions of mounting plates (hxv) [mm] 1200 min./ max. mold height [mm] min 450 Maximum opening width [mm] 750 injection unit Screw diameter [mm] 45 Injection volume [cm3] 427 Injection weight [g] 360 Injection pressure [bar] 1720 Electric-hydraulic equipment Pump motor rated power [kW] 30 Heater power [kW] 15.8 Dimensions and weight Net weight with control cabinet [t] 9.5

Arburg 420C 1300-675 Injection molding machine Year of production - 2002 Selogica control Technical data of the closure: - Clamping force: 1500 kN -The clearance between the columns vertical: 420 mm -The clearance between the columns pos: 420 mm -Size plates of the table pos: 650 mm -Dimension of the vertical table plates: 650 mm -Mold height min: 275 mm -Plate spacing: 850 mm -Opening path: 575 mm -Ejector: 175 mm -Ejection: 40 kN Injection Specifications: -Screw diameter: 55 mm - Injection volume: 353 ccm -Injection pressure: 2080 bar - Screw rotation speed: 59 min -Worm torque: 880 N - Air injection rate: 214 g / s PS -1 hydraulic core -Hydraulic ejector Dimensions and weight: -Dimensions in: 4.82m x 1.48m x 2.18m -Total weight in: 5400KG

Clamping force [kN] 500 min./ max. mold height [mm] 200 Maximum opening width [mm] 450 injection unit Screw diameter [mm] 20 Injection volume [cm3] 31 Injection weight [g] 29 Dimensions and weight Net weight with control cabinet [t] 3.05 Dimensions (length x width x height) [m] 2.20 x 2