tornos usadas para venda (3,093)

greates pass round over bed: 820 mmworkpiece weight max.: 2.000 kgturning speeds: 7,1 - 1.400 U/minLongitudinal Feed: 0,063 - 56 mmPlanar Feed: 0,05 - 28 mmTravel Distance Plan Slider: 520 mmTravel distance of the tailstock quill: 280 mmcenter height over square guideway: 400 mmbed width: 560 mmfaceplate diameter: 800 mmtotal power requirement: 30 kWMain Spindle: - Spindle head (DIN 55022): 11 - Camlock spindle head: 11 - Spindle bore diameter: 128 mm - Spindle diameter at the front bearing: 170 mmLead screw: - Pitch: 12 mm - Diameter: 54 mmCircumferential diameter over the long cross slide: 515 mmCircumferential diameter in the bed recess: 890 mmLength of the  ...

: 0400 mm: 246 mm: 1250 mm: 195 mm: 54 mm: 7,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0460 mm: 270 mm: 1500 mm: 230 mm: 76 mm: 11 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data Manufacturer: WEILER Model: Matador VS1 Speed range: 30 - 3550 rpm 16 speed levels Electrical connection: 380 V Dimensions approx. 1500 x 700 x 1550 mm Configuration 3-jaw chuck HEIDENHAIN Digital Display Tailstock with drill chuck Quick-change steel holder Collet set in the base cabinet Accessories with tips, jaws and tool holders Protective cover on the chuck Machine in used condition Auction-ID: A7-49302-3058

Technical data Manufacturer: GUILD MASTER Model: CTX 400 Machine Type: CNC Lathe Control: Gildemeister CNC / ElektroPilot Operating hours: approx. 18,462 h Max. turning diameter: 400 mm (Source: online) Max. turning length: 640 mm (Source: online) Circumferential diameter over bed: 500 mm (Source: online) Spindle bore: 72 mm (Source: online) Speed range: 25 - 5,000 rpm (Source: online) X-travel: 212 mm (Source: online) Z-travel: 640 mm (Source: online) Tool turret: 12-speed (Source: online) Tool holder: VDI 30 (Source: online) Machine weight: approx. 5.1 - 5.5 t (Source: online) Configuration 3-jaw chuck Berg KH200 12-speed tool turret Powered tools available Tool turret prepared for powered tool holders Chip conveyor available Coolant equipment available Closed work area cladding CNC controller with screen Note No original technical documentation available. The technical data was r ...

Technical data Manufacturer: WEILER Machine Tools Model No.: Intern 140 Machine No.: 85140112 Operating voltage: 380 V Control voltage: 220 V Connected load: 2.2 kW Tip height: 140 mm (Source: Online research) Circulating Ø over bed: 280 mm (Source: online research) Circulating Ø over face slide: 158 mm (Source: Online research) Center width: 650 mm (Source: Online research) Speed range: 96–2,500 rpm, 8 steps (source: online research) Longitudinal feed: 0.02–0.63 mm/rev (source: online research) Tailstock mount: MK 3 (Source: Online research) Quill stroke: 85 mm (Source: Online research) Weight: approx. 660 kg (Source: Online research) Configuration HEIDENHAIN digital display, 3-jaw chuck, Multifix tool holder, tailstock, coolant device and machine base with storage space. Note No technical documentation available. information researched to the best of my knowledge and belief. No ...

Technical data CONTUR CNC lathe MSL-450, built in 2011 Control: Siemens SINUMERIK 828D Max. turning diameter: 450 mm Turning diameter over bed: 700 mm Turning diameter over slide: 530 mm Max. turning length: 600 mm Bar Passage: 75 mm Chuck diameter: 10\" Spindle speed: 100–3,500 rpm Spindle nose: ISO A2-8 Spindle bore: 90 mm Turret: 12 tool positions, VDI 40 Travel X/Z: 250 / 670 mm Rapid traverse X/Z: 24 / 24 m/min Tailstock: MK5, travel 650 mm Weight: approx. 4,700 kg Dimensions: approx. 2,780 × 1,620 × 1,730 mm Configuration 3-jaw chuck, 12-cavity turret, tailstock, chip conveyor, machine light and signal light. Remarks The machine comes from a well-maintained company liquidation and was actively used in ongoing production until the end. Auction-ID: A7-49302-200

Technical data Manufacturer: Mazak / Yamazaki Mazak Corp. Type: Super Quick Turn Model No.: 16MS-Y Nameplate: SQT-16 MSY Machine Type: CNC Lathe / CNC Turning Center Chuck Manufacturer: Kitagawa Chuck Model: B-216 Max. pressure chuck: 410 PSI / 29 kgf/cm² Max. speed chuck: 5,000 RPM Configuration With tool turret, chuck, protective grille and visible auxiliary units. Remarks The machine comes from a well-maintained company liquidation and was actively used in ongoing production until the end. Auction-ID: A7-49302-157

Technical data Manufacturer: Colchester Model: Mascot 1600 Machine Type: Lead and Pull Spindle Lathe Lead screw pitch: 6 mm Multi-stage speed selection, labeling visible up to 1,600 rpm Configuration 3-jaw chuck Fixed bezel Tailstock Tool Holder / Multiple Steel Holder Thread and feed tables on the machine Remarks The machine comes from a well-maintained company liquidation and was actively used in ongoing production until the end. Auction-ID: A7-49302-186

Technical data Manufacturer: EMCO Model: Maximat Super 11 Speeds: 55 / 110 / 200 / 300 / 410 / 600 / 1100 / 2200 rpm 8 speed levels Digital display: ELESTA VISULESTA II E Hardened machine bed Configuration 3-jaw chuck available Additional 3-jaw chuck Collet holder with collet set Quick-change steel holder Tailstock available Accessories with tool holders and tips Machine in used condition Auction-ID: A7-49302-3061

Serial number CK08004 CNC control, brand, type SIEMENS SINUMERIK Machine weight 5000kg Dimension L 4100mm Dimension w 1800mm Dimension h 2300mm Auction-ID: A7-49302-3006

centre height: 400 mmcentre distance: 2.000 mmturning diameter over bed: 810 mmcontrol: WEILER D3 turning diameter over slide rest: 510 mmturning length: 2.000 mmspindle head: DIN55027 Gr.11 spindle diameter: 150 mmspindle bore: 106 mmTurning Speed - Range 1: 1 - 450 U/min.power capacity at 60% / 100 % load: 37,00 / 30,00 KWmax. torque at 60% / 100% load: 3.205 / 2.599 NmTurning Speed - Range 2: 4 - 1.800 U/min.power capacity at 60% / 100 % load: 37,00 / 30,00 KWmax. torque at 60% / 100% load: 813 / 659 Nmface slide travel: 410 mmupper slide-support travel: 140 mmlongitudinal feed: 0 - 5 mm/Uface feed range: 0 - 5 mm/U.power feed longitudinal: 20.000 Nfeeding force facing: 10.000 Nrapid travel - longitudinal/face: 10 / 5 m/mintool taper: Capto C6 tailstock quill diameter: 115 mmtailstock quill stroke: 225 mmtailstock quill taper MT: 6 thread - mm pitch: 0,1 - 250 mmthread - inch: 1/4 -  ...

Technical data Manufacturer: MAZAK Corporation Model: Quick Turn 10N / QT 10N UNIV. Year of manufacture: 03/1987 Control: MAZATROL CAM T-2 Weight according to nameplate: 7,500 lbs Connection according to the marking: 380 V Max. swing diameter: 440 mm (Source: Online research) Max. machining length: 507 mm (Source: Online Research) Spindle speed: 10–2,600 rpm (source: online research) Spindle bore: 56 mm (Source: Online research) Travel X/Z: 155 / 540 mm (Source: Online Research) Tool turret: 8 positions (Source: Online Research) Configuration CNC lathe with tool turret and chuck. MAZATROL CAM T-2 CNC control with screen and control panel. Attached bar feeder available for material feeding. Lateral chip conveyor available. Closed work area with sliding door. Control was on at the time of shooting. Remarks The machine comes from a well-maintained company liquidation and was active ...

center height over bed: 500 mmcentre distance: 6.000 mmbed width: 670 mmturning diameter over bed: 1.030 mmturning dia. over face-slide: 640 mmMax. workpiece weight between centers: 5.000 kgMax. workpiece weight between centers (collet): 6.000 kgfeed speeds x- and z-axis: 6.500 mm/minspindle head: ASA 15 spindle turning speed range: 4 - 830 U/minTorque: 6.224 Nmtotal power requirement: 70 kWweight of the machine ca.: 11,3 tHeadstock: - Front bearing, inside diameter: 235 mm - Rear bearing, inside diameter: 216 mm - Diameter of hole through spindle: 170 mm - Morse taper in spindle sleeve: 6 MKTailstock: - Quill diameter: 150 mm - Quill travel: 400 mm - Quill morse taper: 6 MKSaddle and cross slide: ...

turning diameter: 200 mmturning length: 1000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data Lead and pull spindle lathe Manufacturer: NARDINI Type: ND 220 AE Speed range: 25 - 2000 rpm Electrical connection: 380 V / 50 Hz Connected load: 6.3 kW 3-jaw chuck Ø approx. 250 mm Configuration With guide and pull spindle With tailstock With quick-change steel holder Tapping device available Feed and thread tables on the machine Integrated machine substructure Emergency stop switch available Machine with splash guard Auction-ID: A7-49302-3016

Technical data Manufacturer: Maschinen Wagner Type: WDE 500 Machine Type: Cycles CNC Flatbed Lathe (Source: Online Research) Year of Make: 2014 Control: Siemens SINUMERIK 828D BASIC T Operating voltage: 400 V / 50 Hz Rated current: 40 A Connected load: 24 kVA Weight: 3.0 t Max. circumferential diameter over bed: 500 mm (Source: online research) Max. turning diameter over cross slide: 280 mm (Source: Online research) Max. centre width: 1,500 mm (Source: Online research) Spindle bore: 82 mm (Source: Online research) Spindle speed ranges: 7–135 / 30–550 / 110–2,200 rpm (Source: Online research) Spindle motor: 7.5 kW (Source: online research) Travel X/Z: 295 / 1,435 mm (Source: Online research) Configuration Machine housing with sliding doors, movable control panel, tailstock, quick-change steel holder, machine lighting and coolant supply. Visible accessory with three-jaw chuck and se ...

Technical data Manufacturer: K. Martin Maschinenfabrik, Offenburg Type / Model: KM 40 Design: conventional lathe Spindle speeds: 31.5 / 45 / 63 / 90 / 125 / 180 / 250 / 355 / 500 / 710 / 1,000 / 1,400 rpm Configuration 3-jaw chuck Tailstock Tool Holder Operating instructions for KM 40 lathe available Remarks The machine comes from a well-maintained company liquidation and was actively used in ongoing production until the end. Auction-ID: A7-49302-183

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 79430 €: 1501.23 €: 600 mm: 1500 mm: 300 mm: 80 mm: 400 mm: 400 mm: 8 : 90 MK: 3 : 20 - 100, 80 - 400, 400 - U/Min: max. 8 m/min: max. 8 m/min: 290 mm: 90 mm: 5 MK: 225 mm: 11 kW: 3,5 / 22 kW/Nm: 1,75 / 11 kW/Nm: 120 Nm: 1250 daN: 1050 daNFast and simple communication between the operator and the lathe.Simple workpieces are machined in the same way as on the universal lathe, but more efficient.Complicated workpieces are machined in the same way as on the universal lathe, but faster.Complicated workpieces are machined in the same way as on the CNC lathe, but easier.Based on the controller Schneider Magelis the intelligent, self-developed ZMM Sliven softwareleads the operator also without programming skills simple and fast to the finished workpiece.The interface is simple and with large icons, which is convenient in a specific work enviro ...

: neu : Bulgarien : 114970 €: 2172.93 €: 890 mm: 3000 mm: 400 mm: 155 mm: 490 mm: 700 mm: 15 : 160 MK: 24 : 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 60 - 1/16 Gänge/: 0.125 - 120 : 525 mm: 270 mm: 125 mm: 6 MK: 260 mm: 22 kW: 7500 kgdriven by manual transmission3-axes digital readoutquick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.500 mm € 100120,00 turning length2.000 mm € 103850,00 turning length4.000 mm € 123510,00 turning length5.000 mm € 134810,00 turning length6.000 ...

: neu : Bulgarien : 81780 €: 1545.64 €: 760 mm: 3000 mm: 380 mm: 132 mm: 520 mm: 560 mm: 11 : 140 MK: 17 : 7,5 - 1015 1/min: 150 : 0.039 - 18 mm/U: 0.02 - 9 mm/U: 0.5 - 180 mm: 60 - 1/6 Gänge/: 0.125 - 45 : 410 mm: 150 mm: 105 mm: 6 MK: 225 mm: 15 kW: 4470 kgdriven by conventional transmission3-axes digital readoutquick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)3-jaw chuck Bison3295/DIN6350, Ø 400 mmspindle dead centerfour way rapid traverse devicefoot pedal brakelongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocktailstock quill reducermechanized movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.500 mm € 67770,00 turning ...

- Total installed power 40.40 KW. - Maximum turning length approx. 2400 mm. - Bar pitch diameter approx. 98 mm. - Turret: 12 positions, the tools that appear in the photographs are included. - 3-jaw plate with a diameter of 500 mm. - SIEMENS SINUMERIK control. - Equipped with automatic hydraulic window. - Chip extractor. - Accessories and cutting tools are included. - This machine does NOT have manuals. - Operating conditions of this machine: unchecked. Auction-ID: A7-48839-4

4 position automatic toolchanger - charging options available Auction-ID: A1-49027-14

Machine number: 00071830Operating voltage: 400 VFrequency: 50 HzControl voltage: 24 VRated power: 150 kWHours read: 3143Control: SIEMENS SINUMERIKCenter height: 1270 mmNumber of facing slides: 2Workpiece length: min. 700 mm/max. 2400 mmWorkpiece diameter: min. 50 mm/max. 200 mmDrive power Main spindle: 2 x 37 kWMax. chuck passage: 210 mmChuck data:Piston stroke: 25 mmStroke per jaw: 11.1 mmmax. operating force: 52.5 kNmax. operating pressure: 30 barmax. speed: 2000 rpmincl. loading system and a larger batch of VDI 50 tool holders - partly driven, partly normalincl. workbench and workshop drawer cabinet with extensive documentationAttention: the machine can be transported on a standard truck ! Auction-ID: A7-49089-185

TEACH IN LATHE Inv. No.: 12.689C1 Make CHEVALIER Model FCL40160 Mach. No. X7895C01 Control SIEMENS 810D Centre Distance 4.000 mm Max. Swing over Bed Ø 1.015 mm Max. Swing over Cross Slide Ø 670 mm Spindle Bore Ø 134 mm R.P.M. 0 – 1.200 kW 22/33 Volts 400 Cycles 50 Including: 1 x Steady Rest Ø 300 mm Chip Conveyor 4 Way Automatic Toolpost Fixed toolpost multifix Hydraulic chuck 380mm Auction-ID: A1-49027-4

: gebraucht : 2015 : 1686 : prompt, Zwischenverkauf v : England : 14800 €: 1 : 330 mm: 1000 mm: 167 mm: 38 mm: 210 mm: 12 : 40 - 2500 1/min: 16 : 0.03 - 1 mm/U: 0.2 - 14 mm: 2 - 56 TPI Gänge/: 190 mm: 92 mm: 42 mm: 3 MK: 110 mm: 2.2 kW: 1940 mm: 1000 mm: 1550 mm: 685 kg3-axis digital read out Newall4-jaw chuck Bison diameter 160mm with inside and outside jawsQuick-change tool post with 1 holdCoolant deviceChuck protectionSteel holder protectionLead screw coverMachine lightManual brakeOperating manual in German with EC declaration of conformityBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live testing is possible at our facility• DIGITAL DEMONSTRATION: Individual live demonstration via video call• R ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 87350 €: 1650.92 €: 540 mm: 1500 mm: 85 mm: 310 mm: 350 mm: D1-8 : 1/20 MK: 3 : 27 - 2250 1/min: 5000 mm/min: 8000 mm/min: 280 mm: 75 mm: 5 MK: 190 mm: 9 / 13,5 (S1 / S6 40%) kW: 0.02 mm: 0.016 mm: ISO3655 : 3340 mm: 1905 mm: 2235 mm: 3400 kgTHREE OPERATING MODES: CNC / TEACH-IN / MANUALSiemens 828D CNC control• 12-inch colour screen• Linear interpolation• Circular interpolation• Helical interpolation• Skip function• Workpiece coordinate system• Coordinate system rotation• Rigid tapping• Mirror image, scaling and rotation• Turning cycle• ShopTurn softwareLarge spindle bore, with precision bearings for high accuracy and consistent cutting stability.Precision ball screw Ø 40 mm (Class C5) on the Z-axis and ball screw Ø 25 mm (Class C3) on the X-axis.2-axis AC servo motors50-300 mm roller-type tailstock.Manual tailstoc ...

: gebraucht : 2023 : 1675 : prompt, Zwischenverkauf v : Bulgarien : 17600 €: 1 : 325 mm: 1000 mm: 165 mm: 32 mm: 190 mm: 200 mm: 5 : 4,5 MK: 12 : 85 - 2.000 1/min: 48 : 0.006 - 1.77 mm/U: 0.003 - 0.885 mm/U: 0.1 - 28 mm: 75 - 2,5 Gänge/: 0.1 - 1.75 : 150 mm: 95 mm: 40 mm: 3 MK: 100 mm: 2.2 kW: 2150 mm: 950 mm: 1350 mm: 770 kgdemo machine / mint conditionnet price (price for new machine € 23.970,00)driven by manual transmission3-axes digital readout Fagor 40iquick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 160 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",incl. following optional equipment:1 lenght stopBUYING USED MACHINER ...

: neu : Bulgarien : 58370 €: 1103.19 €: 600 mm: 2000 mm: 300 mm: 80 mm: 400 mm: 400 mm: 8 : 90 MK: 3 : 20 - 100, 80 - 400, 400 - U/Min: 120 : 64 : 0.5 - 120 mm: 60 - 1/4 Gänge/: 0.125 - 30 : 315 mm: 130 mm: 90 mm: 5 MK: 230 mm: 11 kW: 3600 mm: 1500 mm: 1650 mm: 3110 kgIn contrast to the universal lathes, here the adjustment of the revolutions is infinitely variable by means of a frequency inverter.It is possible to ensure a ",constant cutting speed", (V-const), i.e. when changing the diameter to be machined, the speed remains unchanged and thus a higher accuracy and smoothness of the surface is achieved. At the customer&apos,s request, the machines can be manufactured with a reading of the linear displacement and positioning by mounting a digital display.driven by variable speed control (3 steps)3-axes digital readout Fagor with CSS (constant surface speed)quick change toolp ...

: neu : Bulgarien : 140320 €: 2652.05 €: 1320 mm: 3000 mm: 625 mm: 155 mm: 940 mm: 700 mm: 15 : 160 MK: 4 : 3,7 - 15,6, 14,7 - 62, 58 U/Min: 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 1/16 - 60 Gänge/: 0.125 - 120 : 685 mm: 270 mm: 125 mm: 6 MK: 260 mm: 30 kW: 8550 kgdriven by variable speed control (4 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.500 mm € 125460,00 turning length4.000 mm € 148950,00 turning ...