tornos usadas para venda (3,123)

Fuse protection: 100A, control voltage: 220V, operating voltage: 380V, connected load: 30,4kW, weight: 14,4t, with four-jaw chuck (diameter: 900mm), tailstock, quill, three steady rests and control system. An on-site inspection is possible.

Center height: 450mm, distance between centers: 3000mm, fuse protection: 630A, rated current: 46A, control voltage: 220V, operating voltage: 380V, frequency: 50Hz, connected load: 22,5kW, weight: 6,1t, with four-jaw chuck (diameter: 800mm), tailstock, quill and three steady rests. An on-site inspection is possible.

Vários suportes de troca rápida / suportes de troca rápida / acessórios no total 42 PCs: 7 peças WDL 4/50 16 WDR 4/40 10 peças WDL 4/40 3 peças WB 4/60⌀ 3 unidades. WBW 4/60⌀ 1 pcs. WBW 23/60⌀ 2 peças sem tipo Por favor, diga-nos quais os artigos que lhe interessam para receber uma oferta. Teremos todo o gosto em fornecer-lhe mais fotografias.

Aqui temos uma Weiler DZ 65, torre de popa Duplomatic de 16 dobras, 2 fusos, cabeça de colete para ambos os fusos, ferramenta acionada em todos os pontos de rotação, Transportador de aparos, refrigerante através de 2 fusos, ejetor de mola do segundo fuso, ligação ao alimentador de hastes, remoção de peças via bandeja de gotejamento, correia transportadora de peças, vários tubos de inserção de fuso, transportador de aparos, alimentação de material Irco Profimat 3m,

Lathe Colchester Bantam VS 3500

Lathe Gildemeister NEF 320 K BJ 2002

Lathe Gildemeister CT 60 BJ 1990

Centro de Viragem Vertical de Dois Fusos - Controlo Siemens 840 D - Cama de máquina VSC 400 Duo - 2 x torre de disco de 12 x diâmetro 40 mm, acionada - 2 x estações adicionais de perfuração e aterramento - Sistema aberto de transporte de peças - Unidade de transferência e torneio - Interface com um sistema de tratamento externo - Alimentação central de arrefecimento para bomba de alta pressão 70 bar - Soprar o dispositivo de captação e os dispositivos de fixação - Medição da peça de trabalho - Monitorização de ferramentas - Opção de rede Emag - Gestão de ferramentas irmãs Diâmetro circunferencial 260 mm X-travel 860 mm Z-curso 200 mm Fuso principal 2 velocidade máxima até 4500 1/min Espaçamento do fuso 1055 mm Main Drive 2 Motor AC Assíncrono 6ß/100% ED 39/28 KW Torque máximo 460 Nm Travessia rápida x/ z 45/ 30 m/min

Diâmetro da barra: 8 mm a 65 mm (material redondo) Comprimento da cana (33L): aproximadamente 3,3 metros Tipo de máquina: Cabeça fixa de fuso (tornos automáticos) Tipo de carregador: Carregador MP (múltiplos carregadores)

A Hitachi Seiki CNC turning center in need of repair is offered for sale. Max. turning diameter: approx. 255mm, max. turning length: approx. 380mm, X/Z travel: 200mm/400mm, spindle speed: up to approx. 3600rpm, spindle motor power: 11kW, bar capacity: approx. 64mm, spindle bore: approx. 78mm, chuck size: approx. 255mm, tool turret: 10/12-station, tailstock taper: MT5, control: SEICOS-L MULTI, version V3R5.G. Weight: approx. 4300kg. A tool holder on the chuck is broken. An on-site inspection is possible.

Cross slide NC1-left, X1-axis: 450mm, cross slide NC1-left, Z1-axis: 1980mm, cross slide NC2-right, X2-axis: 450mm, cross slide NC2-right, Z2-axis: 1980mm, M-head slide-left, Q1-axis: 1980mm, M-head slide-right, Q2-axis: 1980mm, tailstock + steady rest slide-left, W1-axis: 1980mm, tailstock + steady rest slide-right, W2-axis: 1980mm, Y-axis: +/-65mm, workpiece length: 760-3000mm, workpiece clamping diameter: 20-200mm, main drive power: 2x 37kW, main drive speed (stepless): 0-2200/min, tool drive speed (stepless): 0-2320/min, tool holder: VDI50, tailstock center: MK 5, number of tool holders: 12, steady rest: SLU-5 SO, steady rest clamping diameter: 20-200mm, working height: 1300mm, max. workpiece diameter: 20-200mm, max. workpiece weight: 250kg, workpiece drive/clamping: 2x hydraulically operated SAV front-end chucks, max. chuck through-bore diameter: 210mm, spindle power: 2x 37kW, max.  ...

A CNC lathe Optimum is offered. Swing over bed/cross slide: 300mm/200mm, distance between centers: 430mm, X/Z travel: 145mm/465mm, X/Z rapid traverse: 10m/min/12m/min, bar capacity: 30mm, spindle bore: 30mm, max. spindle speed: 4000rpm, tool stations: 6, control: Siemens SINUMERIK 808D ADVANCED. Machine dimensions X/Y/Z: approx. 1655mm/1590mm/1955mm, weight: approx. 832kg. An on-site inspection is possible.

Workpiece length: 700-2400mm, workpiece diameter: 50-200mm, main spindle drive power: 2x 37kW, max. chuck through-bore: 210mm, chuck piston stroke: 25mm, chuck stroke per jaw: 11.1mm, max. chuck actuating force: 52.5kN, max. chuck actuating pressure: 30bar, max. chuck speed: 2000/min, loading and unloading unit range: 2600mm, center clamping head travel: 1200mm, center clamping head stroke: 1200mm, main fuse: 315A, connected load: 150kW, overall length: approx. 10,640mm, main section length: 6800mm, width: 2370mm, height: 2860mm, overall height including superstructure: 3450mm, operating hours: 3143h. With chip conveyor, loading and unloading unit, fixed center clamping head, movable center clamping head, control panel, ILT air cleaner, electrical cabinet, hydraulic cabinet, coolant tank for motor cooling and coolant tank for tool cooling and documentation. Partially overhauled by the ma ...

Machining processes: drilling, turning, milling, axes: Z3 longitudinal slide tool turret, Z4 longitudinal slide tool turret, X3 cross slide tool turret, X4 cross slide tool turret, C1 workpiece drive, C2 workpiece drive, K5 turret swivel axis, K6 tool drive, K7 turret swivel axis, K8 tool drive, travel X3: 251mm, X4: 251mm, Z3: 662mm, Z4: 662mm, tool turret: 12-station radial, DIN 69880-VDI40, drive: DIN 5480-W20x0.8, tool swing diameter: 580mm, specified dimension at tool area: 320mm, length: 13,000mm, width: 7300mm, height: 4100mm, weight: 22t, operating hours: 14,748h. Equipment: OP012 control panel, Kuka handling robot, chip conveyor, coolant tank, hydraulics, pneumatics, electrical cabinet, parts infeed and outfeed, documentation, installation plan, working area diagram, gearbox plan and transport plan. The following components should be overhauled: machine bed (guideways/ball screw ...

turning diameter over bed: 500 mmturning diameter over slide rest: 300 mmturning length: 1000 mmtotal power requirement: ? kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2,511,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Miyano BNA-42 MSYYear of manuf. : 2012 Control : Mitsubishi M70 Turning length : 100 mm____________Description:Mainspindle:Technology:Belt-driven spindleSpeed:6.000 rpmPower (max.):7,5 kWTorque (max.):60,8 NmBarcapacity:42 mmC-Axis:0,001°Workpiececlamping:Collet chuck, Type 173ESubspindle:Technology:Belt-driven spindleSpeed:5.000 rpmPower (max.):5,5 kWTorque (max.):38,7 NmC-Axis:0,001°Workpiececlamping:Collet chuckMovement in X/Z:140/310 mmRapid travers in X/Z:12 m/minToolcarrier (X/Y/Z):Technology:Turret with 8 stationsTooldrive:5.000 rpmMovement in X/Y/Z:140/70/235 mmRapid travers in X/Y/Z:20 m/minEquipment/Accessory:Chipmanagement:Chip conveyorCoolingmanagement:Cooling pumpRawmaterialfeed:Bar laoder, IEMCA Master 80 HFFinishpart removal:Part catcher with conveyorbeltFire-extinguishing unit:Kraft + BauerFurther Equipment:Trafo

Traub TNX 65Year of manuf. : 2011 Control : Mitsubishi TX8i-s ____________Description:Mainspindle:Technology:MotorspindleSpeed:5.000 rpmPower:22,6 kWTorque:180 NmBarcapacity:65 mmWorkpiececlamping:Collet chuck, Hainbuch Spanntop Kombi Axfix Gr. 65Subspindle:Technology:MotorspindleSpeed:5.000 rpmPower:22,6 kWTorque:180 NmWorkpiececlamping:Collet chuck, Hainbuch Spanntop Kombi Axfix Gr. 65Ejector:Hydraulic with flushToolcarrier I (X/Y/Z):Technology:Turret with 10 stationsTaper:VDI30Tooldrive:6.000 rpm, 5,5 kW, 17,5 NmMovement in X/Y/Z:175/80/650 mmRapid travers in X/Y/Z:20/20/40 m/minToolcarrier II (X/Y/Z):Technology:Turret with 10 stationsTaper:VDI30Tooldrive:6.000 rpm, 5,5 kW, 17,5 NmMovement in X/Y/Z:175/80/650 mmRapid travers in X/Y/Z:20/20/40 m/minToolcarrier III (X/Y/Z):Technology:Turret with 10 stationsTaper:VDI30Tooldrive:6.000 rpm, 5,5 kW, 17,5 NmMovement in X/Y/Z:175/80/650 ...

X-axis travel: 220 mm, Z-axis travel: 635 mm, swing diameter over the bed cover: 570 mm, swing diameter over the cross-slide cover: 420 mm, speed range: 25-5,000 rpm, spindle bore diameter: 65 mm, chuck diameter: 250 mm, tailstock travel: 550 mm, main spindle drive power at 100% duty cycle: 21 kW, maximum torque: 240 Nm, C-axis holding torque: 200 Nm, control system: Heidenhain EP 4290 TP, connected load: 44 kVA, length: 3,250 mm, width: 1,750 mm, height: 2,300 mm, weight without chip conveyor: 5.3 t, operating hours: 16,930 h. Equipment: Hydraulically adjustable three-jaw chuck with various interchangeable jaws, MK4 tailstock quill, 12-station VDI 30 disc turret with 6 driven tool stations, tool measuring arm, workpiece pick-up device, coolant system, chip conveyor, coolant mist extraction system, various tool holders, Drehwerk turning and milling tools including driven tools, two tool  ...

Turning diameter: 500 mm, swing diameter over the cross slide: 290 mm, turning length: 1500 mm, spindle speed: 8 to 2800 rpm with three gear ranges, spindle bore diameter: 70 mm, three-jaw chuck diameter: 250 mm, tailstock quill taper: MT4, quill travel: 180 mm, connected load: 24 kVA, control system: Heidenhain Manual Plus, length: 3200 mm, width: 1700 mm, height: 1800 mm, weight: 3.2 t, operating hours: 42,733 h. The machine is equipped with a manual tailstock, chuck guard, coolant system, Multifix tool holder, various tool holders, various drill chucks, various turning and drilling tools, interchangeable jaws for the three-jaw chuck, a depth stop for the main spindle, a tool cabinet and documentation. The machine was completely overhauled by the manufacturer in 2010. An on-site inspection is possible.

A máquina era feita manutenção anual por Okuma Centro de torneamento e fresagem CNC com 9 eixos CNC, Okuma MacTurn 350 W, Ano de fabrico 2004, OSP-E 100L, Revista adicional, Compartimento do carregador 80 Ww, Fuso principal com eixo C, fuso contrário com eixo C, Eixo deslizante do eixo Y / eixo de fresagem, A montar o HSK 63, Eixo B escalonado como fuso de fresagem, Largura central 1500 mm, Diâmetro do eixo 80 mm, Circulação máxima: 550 mm, Giro 350 mm, Revólver inferior de 12 camadas com revólver aplicado. ferramentas, Sistema de Filtro Compacto Interlite 900 l, sucção, Tempo de funcionamento do fuso aproximadamente 18300 h, Päneförderer, Braço de empunhadura do trocador de ferramentas completamente renovado, arrefecimento de alta pressão, Braço medidor WZG, Trocador de ferramentas revisto, Fuso principal Kitagawa B - 210, Sub-fuso Kitagawa B ...

Weiler DZ 40, Ano de fabrico 2008, Controlo Siemens 840 D, Viagem X/Z 200/350 mm, Diâmetro de rotação 180 mm, Bobmkney Ev Iujrzedf Circulação Ø máx. 560 mm, Eixo Y +/- 25 mm, Eixo Q / contramão programável, Deslocação do eixo Q 360 mm, Sistema de medição do eixo Q rotativo, Contramão MK 4, Travessia máxima do eixo principal 42 mm, Diâmetro do eixo 52 mm, Travessia rápida X/Z/Q 30/30/20 m/min, Torre de 16 velocidades - todas as estações acionadas, VDI 25, Diâmetro do eixo 25 mm, Solicitado. Ferramentas até 4.500 rpm, Bandeja de peças, acessórios, Solicitado. Porta-ferramentas, portadores rígidos,

Mestre da Guilda CTX 510 Controlo: Siemens 840 D com Loja - Turn Ano de Fabricação: 2004 Curso X / Z: 300 / 1050 mm Revólver: 12 velocidades Porta-ferramentas: VDI 40 Bsbmezmxz Roknrzodf Velocidade do eixo até a: 3.500 rpm Passagem da barra: 90 mm Curso da pena: 150 mm Contramão Arrefecimento 20 bar Tamanho do mandril: 315 mm Horas de fuso aproximadas: 14.000 Foram produzidos lotes de 0 a 5 unidades na máquina A programação era feita na máquina

This 4-axis Mazak QTN-200M was manufactured in 2004. It features a maximum turning diameter of 380 mm and a maximum swing diameter of 675 mm. The machine is equipped with a powerful main spindle that reaches speeds of up to 5,000 rpm and a robust tool turret with 12 positions. If you are looking to get high-quality turning capabilities, consider the Mazak QTN-200M machine we have for sale. Contact us for further details.

Manual lead screw and feed rod lathe manufactured in 2018. This Optimum TH 4610 features a distance between centers of 1060 mm and a swing over bed of 460 mm. It has a spindle speed range of 25 – 2000 U/min and can handle a maximum workpiece weight of 300 kg. If you are looking to get high-quality turning capabilities, consider the Optimum TH 4610 machine we have for sale. Contact us for further details.

Poder do utilizador

A Krewema CNC large-format semi-frontal lathe is available. X/Z travel: 1500mm/850mm, center height: 475mm, distance between centers base/bed extended: 1685mm/2685mm, max. turning diameter over bed/cross slide: 935mm/620mm, max. swing diameter in the gap: 1600mm, main spindle bore: 155mm, tailstock quill diameter: 140mm, quill taper: MK6, quill stroke: 300mm, tool turret: Sauter, tool stations: 4, 3-jaw chuck diameter: 630mm, faceplate: Schunk, faceplate diameter: 1000mm, control: Siemens 840D sl ShopMill. Including coolant system, external coolant nozzles and chip conveyor. Documentation available. An on-site inspection is possible.

Horizontal turning machine manufactured in 2018. This Weiler PRIMUS VCD features a connected load of 7.5 kVA and operates at a nominal current of 15.5 A. With a machine weight of 1050 kg, it is designed for robust performance. If you are looking to get high-quality turning capabilities, consider the Weiler PRIMUS VCD machine we have for sale. Contact us for further details.

A Xiangfan/SPARK CNC large-format engine lathe is available. Swing diameter over bed/cross slide: 2200mm/1800mm, bed width: 1100mm, distance between centers: 8000mm, max. turning length: 7500mm, max. workpiece weight: 20t, max. workpiece weight between centers: 19t, main spindle bore: 140mm, bar capacity: 100mm, spindle speed: 200rpm, X/Z-axis travel: 920mm/7500mm, feed rate: 2m/min, rapid traverse: 3m/min, tool stations: 4, chuck jaw count: 4, chuck diameter: 2200mm, chip conveyor length: 8000mm, control: Siemens SINUMERIK 802D. Including coolant system, mandrel, chip conveyor and measuring system. Documentation available. An on-site inspection is possible.

Controlo Philips B2T Diâmetro circunferencial 640 mm Diâmetro de maquinação longitudinal 550 mm Diâmetro de usinagem na torre de tambor 450 mm Comprimento de torneio 1000 mm Velocidade do fuso 2.240 min-1 Diâmetro do eixo 103 mm Torre de tambor de 12 velocidades VDI 60 Transportador de cavacos

Key data: 110 mm, 450 mm, 5600 1/min

Ano de fabrico 1996 Controlo: TX8 F incluindo o alimentador Simag de 42,1 bar Ano de construção: 2003 O alimentador de barras tem no máximo cerca de 3,2 m para barras de 3 m. com muitos acessórios A máquina ainda está alimentada e disponível com pouca antecedência