subcategories
(3rd category level)
Manufacturer:
(Category: 101)
bore capacity in steel (diameter): 32 mmarm length: 1000 mmworkpiece height max.: 1400 mmtotal power requirement: 6 kWweight of the machine ca.: 3.700 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information
bore capacity in steel (diameter): 50 mmthroat: 300 mmbore stroke: 200 mmspindle taper: MK 4 spindle turning speed range: 55 - 600 U/mintable diameter: 500 mmcolumn diameter: 180 mmfeeds: 0,07/0,11/0,16/0,22 mm/Utotal power requirement: 1,47 / 1,84 kWweight of the machine ca.: 500 kgdimensions of the machine ca.: 1,3 x 0,65 x 2,17 mCondition: ready for operation: Electric 380 Volt: Machine dealer with own stock of 2500 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Drilling capacity in steel/GG: 50/60 mm spindle retainer: 5 MK projection: 400 mm table size: 700 x 600 mm Quill stroke: 275 mm spindle speeds: 32-1030 rpm feeds: 4: 0.1 ? 0.4 mm drive motor: 380 V, 2.2/3.7 kW space: 700 x 1200 x 2700 mm weight: 1240 kg ... more information
Very good horizontal precision boring mill with optics and digital ... more information
Specifications: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle holder MK 3 long spindle - Drilling spindle stroke 180 mm - Drilling spindle speeds infinitely variable approx. 140 - 1600 rpm - 3 feeds 0.1 ; 0,2 ; 0.3 mm/U - Projection 290 mm - max distance table - drilling spindle 620 mm - Rotary table with 2 T-slots 450 mm - Height adjustable via rack and pinion with hand crank - Coolant device - Drive 380 V / 0.9 / 1.3 kW - Space requirement approx. W 750 x H 1900 x D 700 mm - Weight approx. 280 kg
with FESTO rotary table 360 mm numbers of drilling units: 29433, 29616. 29617, 29797 and 29798 ... more information
Inv. Num. : 6037 Type: WH 63 Producer: TOS Created: 1970 Parameters: Work table length: 900 mm Work table width: 800 mm Cone: MORSA Equipment: Front panel Lifting device (125 kg) ... more information
Inv. Num. : 6737 Type: WHN 11 Producer: TOS Created: 1970 Parameters: Working table length: 1250 mm Working table width: 1250 mm Maximum table load (uniform): 8000 kg Maximum spindle speed: 900 1/min X-axis travel: 1600 mm Y-axis travel: 1250 mm Z-axis travel: 1000 mm Spindle power: 34 kW Spindle diameter: 110 mm
Type: H 100A Parameters: 100 mm, 1250 mm Manufacturer: Tos Year of production / SO / GO: 1970 / - / 2004 Description: Machine in good technical condition. Possibility of testing after agreement. Working Spindle Diameter 100 Mm Iso 50 Spindle Taper Table Clamping Area 1250 X 1250 Mm Max. Workpiece weight 3000 Kg Longitudinal Table Movement - X Axis 1250 Mm Transverse Table Movement - Z Axis 1250 Mm Vertical Table Movement - Y Axis 1120 Mm
throat:640 mmtotal power requirement:1,6 kWweight of the machine ca.:450 kgdimensions of the machine ca.:1000 x 600 x 2100 mtable-size:455 x 380 mmchuck::MK 3 working area:355 x 280 mm ... more information
bore capacity in steel (diameter): 55 mmarm length: 435 / 2000 mmworkpiece height max.: 1500 mmspindle taper: MK 5 spindle turning speed range: 14 - 1800 U/minfeeds: 0,025 - 1,25 mm/Uquill stroke: 400 mmdistance spindle/base plate: 665 / 1850 mmbase plate surface area: 2120 x 1130 mmbore capacity in cast iron: 70 mmtotal power requirement: 5,7 kWweight of the machine ca.: 7 tAccessories: box table 1000 x 1000 x 490 mm, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 90 mmx-travel: 1000 mmy-travel: 1120 mmz-travel: 1000 mmtable surface area: 1250x1120 mmspindle taper MT: 5 spindle turning speed range: 12,5-1600 U/minRadial face slide: 800 mmTable load: 3000 kgtotal power requirement: 12,5 kWweight of the machine ca.: 13 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter):10 mmthroat:210 mmbore stroke:100 mmtotal power requirement:0,7 kWweight of the machine ca.:302 kgdimensions of the machine ca.: 620 x 800 x 1950 mmTable dimensions:350 x 250 mmspindle speeds::250, 355, 710, 1000, 1400, 2000, 2500 U/min ... more information
Speed in 2 steps : 1 = 30 - 200 rpm. 2 = 200 - 1100 rpm. Feed: 0.1 - 0.4 mm/rev Tool holder: MK5 ... more information
Drilling capacity steel/GG: 23 mm Spindle holder: 3 MK Projection: 275 mm Table size: 300 x 400 mm Quill stroke: 90 mm Spindle speeds: 100 - 1180 rpm Feeds: 0.1/0.6/0.25 mm Drive motor: 380 V, 1.25/2.15 kW Dimensions: 850 x 400 x 1770 mm Weight: 280 kg ... more information
Webo BR 35 V / 1250 Radial Drill Workspace Delete. v Spindle to stand smallest 280 mm / largest 1250 mm Delete. v Spindle or drill. b. Table top smallest 0 mm / largest 900 mm Delete. v Spindle to base plate smallest 200 mm / largest 1400 mm Diameter of the drill smallest 860mm / largest 2800 mm Swivel range 2,200mm / clamping diameter approx. 240mm Aufspannfl. upper 650 x 500 mm / side 770 x 500 mm Drilling spindle 40/85 ⌀ mm Speed 30 - 1800 rpm Year of construction 1971 Further technical data can be found on the machine map Item condition: used, impeccably and top maintained. Action components: Only the Webo BR 35 V / 1250 without the shown reversible clamp, this can be done individually or as a combination offer in our other Auction can be purchased. Item location: 42859 Remscheid Dismantling and transport by the buyer. The dismantling, loadin ...
core drilling diameter max.: 50-355 mmbore depth: 4000 mmswing diameter: 1000 mmcentre height: 500 mmfull boring: 18-100 mmmain spindle bore: 163 mmturning speeds: 56-710 U/minworkpiece weight: 6,3/10 tTailstock: 70-600 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mDrill pipes, guide block, drill head, rolling steady rest, support bearing drill heads, jaws 21- 240 mm, Holder, tools, shelves, cupboards The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Saling drill BLUTHARDT in robust performance, drilling capacity 50 mm, holder Mk 4 ... more information
conventional ´ traditional Tischbohrwerk, work spindle diameter 85 mm Traverse paths x 1000 mm, y 1000 mm, z 900 mm, ISO 40,. Clamping area table 1000 x 1120 mm with position indicator ... more information