boring mills and machining centers used for sale

number of spindles: 3 bore capacity in steel (diameter): 40 mmbore stroke: 180 mmweight of the machine ca.: 2,3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

Stand drilling machine in row arrangement, used Gang drilling machine, used Type: BT 6.52 Manufacturer / make: Steinel Built/ new in: 1978 Drilling capacity / drilling capacity: 6 mm in St 60 Spindle cone/ spindle taper: MK 1 Drilling spindle discharge / distance center drill spindle to column: 204 mm Drilling stroke/ way of spindle: 90 mm Table clamping area/ table size: 800 x 390 mm Column diameter/ diam. of coulmn: 60 mm Drilling spindle speeds / speeds of drilling spindle: 1400 / 2800 / 5600 per min/ per minute Total connection value / rated power: 0.25 kW each => 1 kW Weight / weight: approx. 0.4 t

Inv. Num. : 5480 Type: W 160 G Producer: ŠKODA Created: 1978 Parameters: Control System: MEFI Spindle drive power: 55 kW Minimum spindle speed: 2 1/min Maximum spindle speed: 800 1/min Mechanical feed length axis X: 6000 mm Mechanical feed length Y-axis: 2500 mm Mechanical feed length Z-axis: 1250 mm Maximum feed rate X-axis: 3200 mm/min Maximum feed rate Y-axis: 3200 mm/min Maximum feed speed Z-axis: 3200 mm/min Cone: M 100 Spindle diameter: 160 mm Maximum excavation depth: 1600 mm Spindle extension: 1250 mm Base size: 8000 x 5500 mm Travel of the stand on the bed: 6000 mm

 ... more information

spindle diameter: 105 mmx-travel: 1250 mmy-travel: 1000 mmz-travel: 600 mmtable length: 1100 mmtable width: 900 mmtool adaptor: 50 ISO / MKtotal power requirement: kWweight of the machine ca.: tCNC Table Borer, Reconditioned 2002, BOSCH CC 300The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X / Y / Z / W = 8000/3200/1600/1250 Working spindle diameter 160 mm Spindle taper M 100 Maximum spindle drilling depth 1,600 mm Largest quill extension 1,250 mm Spindle speed in the range of 2 - 800 min-1 Displacements in the range: drilling 0.5 - 1,600 mm / min milling 0.5 - 3,200 mm / min Power consumption of the spindle electric motor 6 - 55 kW Threads: metric Whitworth 0.5 - 12 mm 1 - 28 thread / 1 VERTICAL HEADBOARD TRAVEL ON STAND 2,500 mm TRAVEL OF THE STAND ON THE BED 6,000 mm MOTHERBOARD DIMENSIONS 8,000 x 5,500

bore capacity in steel (diameter): 35 mmthroat: 330 mmbore stroke: 165 mmspindle taper: MK4 turning speed range - stepless: 130-480/480-1750 U/mintable width: 742 mmtable depth: 594 mmtotal power requirement: 2,2 kWweight of the machine ca.: 700 tFeed with electromagnetic feed clutch0.1/0,2/0,3right- and left rotationCooling unit not available Table and Drilling Head height adjustableheight adjustment of upper drilling unit: 200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

taper MK: MK5 round table: ja weight of the machine ca.: 1.200 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

bore capacity in steel (diameter): 32 mmbore capacity in cast iron: 40 mmworkpiece height max.: 550 mmtable surface area: 1530 x 750 mmspindle taper MT: 4 throat: 1000 mmbore spindle stroke: 170 mmspindle turning speed range: 38 - 2000 U/minvoltage: 380 Vconnected load: 5,0 kWweight of the machine ca.: 2,0 tdimensions of the machine ca.: 2,0 x 1,6 x 2,1 mFast radials with- feed- 3 tables- Thread cutting device- Coolant system- Tool holder with toolssee picturesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mmx-travel: 2750 mmy-travel: 2500 mmz-travel: 1050 mmw-axis: 1000 mmRadial face slide diameter: 800 mmradial face slide travel: 240 mmtable surface area: 1800x2000 mmturning speeds: 4,8-900 U/minworkpiece weight: 8000 kgfaceplate speeds from - to: 4,5-180 U/minFeed: 5-2000 mm/minthreading: total power requirement: 40 kWweight of the machine ca.: 37 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1000 mmy-travel: 1000 mmz-travel: 1600 mmspindle diameter: 90 mmtable surface area: 1000 x 1120 mmtable load capacity: 2500 kptable rotation: 360 °W-axis (spindle longitudinal): 710 mmspindle turning speed range: 8 - 1600 U/minfeeds: 0,8 - 2000 mm/minmain drive: 11 kWtool taper: MK 5 total power requirement: 16 kWweight of the machine ca.: 8,6 tdimensions of the machine ca.: 5 x 3,15 x 2,65 mwithcoolantelektro cabinettelescoping coversThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Drilling capacity 16mm Drilling stroke 90mm Recording MK2 Projection 175mm Speed 200 - 1500rpm Connection voltage 400 volts Table can be swiveled and swiveledApprox. Onsite Dimension. (l x w x h): 800 x 600 x 1,200 mm, weight approx.: 90 kg ... more information

W 200G with Siemens AC main motor. modernized the main drive by instalation of Siemens AC motor with SIMODRIVE 611. Original built ISO 60 taper and 630 rpm Main data: X=8000 mm Y=4150 mm Z =1600 mm W=2000 mm Spindle dia 200mm ISO 60 spindle speed max 800 rpm Accessories: DRO Philips available as original rotary table E 20 4 floor plates 5600x1880x400mm milling head IFH 1 and IFW 3 counter steady SKODA IOT 4150

HBM WYSSBROD B74 with control system Heideinhain.  ... more information

Description: Column drilling machine Drilling capacity 32mm Drilling stroke 140mm Projection 250mm Recording MK3 Feed via handwheel Table 360 x 360mm Motor 1.5KW Speed 60 - 1400rpmweight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,000 mm ... more information

Max. diameter for clamping the workpiece to the front plate 1600 mm Guide track width 1000 mm Drilling diameters range 20-320 mm Core diameter range 50-800 mm Drilling diameter 800 mm Range of support diameters for a small stable rest 100-560 mm Range of support diameters for a large stable rest 500-1250 mm Front plate speed range 1.8-355 rpm Faceplate Speed Steps 24 Tool spindle speed range 45-560 rpm Tool Spindle Speed Steps 12 Front plate drive motor power 110 Kw Tool spindle drive motor power 75 Kw Max. length for machine work 15000 mm UPGRADE IN 2010

Table diameter: 1100mm, number of drilling units: 3, power: 1.5kW. ... more information

Specifications: - Drilling performance - in steel 6 mm - in aluminium 10 mm - Drilling depth 60 mm - Projection spindle / column 200 mm - Drilling spindle speeds 450 - 4500 rpm - Drive 380 V / 0.6 kW - Height-adjustable drilling unit with hand crank - Table dimensions 280 x 280 mm - min. / max. distance spindle table 20 / 210 mm - Drilling unit can be swivelled laterally left + right - Space requirement approx. W 280 x H 750 x D 600 mm - Weight approx. 180 kg - with quick-action chuck 1 - 6 mm

vertical boring machine brand froriep model bft160 Used machine visible in Italy, sold as it is ... more information

The machine is a group of two machines on the same bed. The main difference between them are the travel on Y axis. There are a fixed table and a rotary table in the front of them. The rotary table is used only by one of the machine. Boring spindle diameter 221 mm Boring spindle taper ISO 60 Headstock section 1145 x 860 mm Power of main drive motor 100 Kw Gearbox steps 2 Main spindle speed 2,7-600 rpm Column horizontal travel (X axis) (machine 1) 18000 mm Column horizontal travel (X axis) (machine 2) 22500 mm Headstock vertical travel (Y axis) (machine 1) 5000 mm Headstock vertical travel (Y axis) (machine 2) 6000 mm Headstock horizontal travel ( W axis) 1500 mm Boring spindle travel (Z axis) 1500 mm 5 CNC axes – Siemens 840D Able to work with face plate  ...