presses used for sale

pressure: 160 tdistance between columns: 850 mmstroke: 150 mmtable surface area: 850x650 mmtotal power requirement: kWweight of the machine ca.: 7 tdimensions of the machine ca.: 2,5 x 2,5 x 3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

pressure: 25 tthroat: 220 mmstroke: 8-80 mmdayligth: 355 mmno. of strokes: 140 Hub/minram adjustment: 50 mmram surface: 220x180 mmtable surface area: 160 mmhole in the table: 90 mmtotal power requirement: 7,5 kWweight of the machine ca.: 2 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressing force: 40 t table size: 670 x 470 mm plunger surface: 670 x 470 mm clearance between the pillars: 620/470 mm gr. Height: 740 mm Preß speed: 20 mm / s rapid traverse: 50 mm ejector force: 3T Electr. Supply: 380 V, 9.5 kW space: 2200 x 1875 x 3000 mm weight: 2400 kg  ... more information

pressure:500 tstroke:40 - 160 mmno. of strokes:32 / 48 /mindistance between columns:1620 mmdistance table/ram, max. stroke up, adjustment up:660 mmtable surface area:1600 x 1300 mmtable height over floor:750 mmcolumn travel -side:400 x 430 mmram surface:1400 x 1200 mmram adjustment:120 mmpressure of drawing cushion in table:60 tstroke of drawing cushion in table:100 mmdrawing cushion surface in table:1300 x 810 mmmaterial width of feeder:1000 mmmaterial thickness of feeder:- 6,0 mmfeed length:350 mmheight beneath floor:0,3 mpower requirement:44,0 / 66,0 kWweight:56,0 tDimensions (WxDxH):3,55 x 2,55 x 5,1/5,8 mheight beneath floor without drawing cushion:0,3 mheight beneath floor with drawing cushion:1,0 mclutch-/ brake combination:pneumatic; Desch overload protection in ram:mechanical ram counterbalance:pneumatic ram adjustment:motoric drawing cushion in table:pneumatic Mechanical pincer ...

pressure:500 tstroke:40 - 160 mmno. of strokes:32 / 48 /mindistance between columns:1620 mmdistance table/ram, max. stroke up, adjustment up:660 mmtable surface area:1600 x 1300 mmtable height over floor:750 mmcolumn travel -side:400 x 430 mmram surface:1400 x 1200 mmram adjustment:120 mmmaterial width of feeder:1000 mmmaterial thickness of feeder:- 6,0 mmfeed length:350 mmpower requirement:44,0 / 66,0 kWweight:56,0 tDimensions (WxDxH):3,55 x 2,55 x 5,1/5,8 mheight beneath floor:0,3 mpneumatic clutch-brake combination:Desch Mechanical pincers feed:Obru, BVK 3.10.3

pressure:500 tstroke:40 - 160 mmno. of strokes:32 / 48 /mindistance between columns:1620 mmdistance table/ram, max. stroke up, adjustment up:660 mmtable surface area:1600 x 1300 mmtable height over floor:750 mmcolumn travel -side:400 x 430 mmram surface:1400 x 1200 mmram adjustment:120 mmpressure of drawing cushion in table:60 tstroke of drawing cushion in table:100 mmdrawing cushion surface in table:1300 x 810 mmmaterial width of feeder:1000 mmmaterial thickness of feeder:- 6,0 mmfeed length:350 mmpower requirement:44,0 / 66,0 kWweight:56,0 tDimensions (WxDxH):3,55 x 2,55 x 5,1/5,8 mheight beneath floor without drawing cushion:0,3 mheight beneath floor with drawing cushion:1,0 mpneumatic clutch-brake combination:Desch drawing cushion in table:pneumatic Mechanical pincers feed:Obru, BVK 3.10.3

pressure:400 tdistance between columns:1250 mmstroke:250 fix mmno. of strokes:45 /mindistance table/ram, max. stroke up, adjustment up:825 mmtable surface area:1000 x 900 mmcolumn travel -side:400 x 700 mmram surface:1000 x 900 mmram adjustment:100 mmcapacity of ejector in table:40 tejector stroke:160 mmpower capacity:270,0 kWweight:44,0 tDimensions (WxDxH):2,4 x 3,6 x 7,2 mheight over floor:6,4 m

Punching force: 75t, with Band Feeder GSW WV32/80, max. band width: 320mm, max. band thickness: 3.5mm, roller diameter: 80mm, an inspection is possible. ... more information

Pressure:080 tthroat:280 mmstroke:20 - 120 mmno. of strokes:42 - 125 /mindistance table/ram, max. stroke up, adjustment up:510 mmtable surface area:700 x 560 mmhole in the table:280 mmtable height over floor:800 mmpassage to the back:320 mmram surface:560 x 350 mmram adjustment:72 mmWeight:5,2 tDimensions (WxDxH):1,6 x 1,6 x 2,6 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic overload protection in ram:mechanical

MAX CAPASITY 80 T  ... more information

PRESS DESIGN  feedstock transport direction: left to right PRESS FORCES  total force (nominal): 40 toSLIDE  stroke: 57 mm  stroke rate (max.): 1200 /minSLIDE (MECHAN. PRESS)  stroke adjustment: yes   stroke min.: 13 mm  stroke max.: 57 mm  variable speed: yes   stroke rate (min.): 70 /min  stroke rate (max.): 1200 /min

PRESS DESIGN  drive system: eccentric / crank PRESS FORCES  total force (nominal): 30 toPRESS TABLE  table surface (left-right): 480 mm  table surface (front-back): 428 mmSLIDE (MECHAN. PRESS)  slide adjustment: 40 mm  stroke adjustment: yes   stroke min.: 8 mm  stroke max.: 40 mm  variable speed: yes   stroke rate (min.): 100 /min  stroke rate (max.): 600 /minTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 220 mmSTRIP-FEEDER  feeder type: roll feeder   feeding step min.: 20 mm  feeding step max.: 100 mmELECTRICAL SPECIFICATIONS  total power consumption: 4.5 kW  mains voltage: 380 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 1200 mm &nbs ...

-Max pressure at the end of stroke – 4000 ton -Press stroke – 400 mm -Number of stroke – 50 per minute -Max distance of stroke from the table – 1400 mm -Dimensions of slider: 1320 x 1320 mm -Bed dimensions: 1120 x 1600 mm -Bed movement by height – 20 mm -Max pressure of upper ejector – 20 t -Max stroke of upper ejector – 65 mm -Max pressure of lower ejector – 40t -Max stroke of lower ejector – 80 mm -Main motor power – 225 kW -Main motor speed – 730 rpm -Total width — 6280 mm -Total depth – 4885 mm -Total height – 8870 mm -Height over the bed – 7315 mm -Total net weight – 280 092 kg

Pressure:1600 tdistance between columns:4100 mmslide stroke:1450 mmDistance table/ram, stroke up:2750 mmdistance table/blank holder, stroke up:2200 Table surface area:4000 x 2200 mmram pressure:1000 tPressure of blank holder:600 tstroke of blankholder:1000 mmblank holder surface:4050 x 2200 mmRam surface:3200 x 1650 mmpressure of drawing cushion in table:360 tDie cushion stroke in table:300 mmdie cushion area:3500 x 1600 mmSide window:1100 mmOil volume:9000 lPower capacity:390,0 kWWeight:250,0 tDimensions (WxDxH):5,95 x 4,3 x 10,5 mHeight above floor:8,6 mdie cushion in table:hydraulic, controllable die cushion in ram:hydraulic, controllable

Pressure:1000 tdistance between columns:4100 mmstroke:1200 mmDistance table/ram, stroke up:2100 mmTable surface area:4000 x 2200 mmpressure of drawing cushion in table:360 tDie cushion stroke in table:300 mmDie cushion area in table:3500 x 1600 mmDie cushion pressure in ram:100 tDie cushion stroke in ram:160 mmDie cushion area in ram:3250 x 1600 mmRam surface:4000 x 2200 mmSide window:1300 mmOil volume:8000 lPower capacity:300,0 kWDimensions (WxDxH):5,75 x 4,3 x 9,55 mHeight above floor:7,7 mdie cushion in table:hydraulic, controllable die cushion in ram:hydraulic, controllable cutting impact cushioning:hydraulic

No. 4877: 1 gebr. Single-stand hydraulic press Fabr. EITEL, Type T 6.3, Bauj. 1973  ... more information

Capacity: 2500 ton Slider stroke: 190 mm Size of a working course of slider before its extreme bottom position corresponding nominal capacity: 4.5 mm Number of slider courses per minute: 20 Maximum distance between table and slider (in lower position of slider): 800 mm Distance adjustment between table and slider: 20 mm Table overall dimensions: - from front to rear: 1400 mm - from left to right: 1250 mm Thickness of a under-forginig plate: 230 mm Hole diameter in a table: 125 mm The size of a slider in front - back: 900 mm Lower eliminator stroke length: 190 mm force of the bottom pusher: 75 ton Distance between railings: 950 mm Course of a pusher in a slider: 15 mm Capacity of a pusher in a slider: 25 ton Admissible number of starts per minute: 10 Machine overall dimensions - length: 3910 mm - width: 3920 mm - height: 6220 mm Press weight: 97715 kg

Force of pressure: 100 t projection: 350 mm table size: 690 x 840 mm Durchfalloch in the table: 160 mm table adjustment: slide area: 450 x 600 mm slide adjustment: 80 mm stroke adjustment: 8-100 mm stroke rate: 60 / min drive motor: 380 V, 5.5 kW space: 1850 x 1850 x 2650 mm weight: 6800 kg  ... more information

Pressing force: 75t Table: 650 x 560 mm Plunger area: 500 x 300 mm Stroke rate: 50-250 stroke/min Lifting height: 8-80 mm max. installation height: 400 mm Passage between the side stands: 300 mm Feeder: Manufacturer: GSW Type: WV32/80 Band width: max. 320mm Tape thickness: max. 3.5mm Roller diameter: 80mm

Capacity 250 ton Kinetic energy of moving parts at the end of max. ram stroke 13,5 kj Max. ram stroke 400 mm Number of ram stokes (SPM) 34 Slide clearance 560 mm Ram size (front-back 560 mm Table size 670 x 750 mm Lower ejector capacity 16 ton Lower ejector movement 105 mm Main drive motor powe 15 kW Press dimensions 3710 x 1925 x 4415 mm Press weight 18000 kg