milling machines used for sale

Praezision clamping tool Kombi plug-on pins BestNo. 1052-018 2 stub SK60x40x27 Unused and ovp 1 x as good condition Only against bid! Special price  ... more information

Tool milling machine from a training workshop in very good condition Manufacturer Klopp Korradi Year of construction 1991 Digital SK40 automatic feed in three axes Drilling pinole 50 mm Head rotatable Spindle speeds up to 45-1950 rpm x-310 mm y-180 mm z-310 mm Table 600 x 250 mm Feed infinitely variable 10 - 470 mm/min. Machine dimensions approx. 1.0 x 1.1 x 1.6 m Power connection 400Volt 10 Ampere 3-axe digital device AXEsta Counter-holding for horizontal milling Coolant device Chip tub Special price

Horizontal round table - with bearing tracks Bearing tracks can be easily removed, Geraet fully ready for use without restrictions! Diameter 600mm construction height 140mm Partial setup via angular scale It's immediately available. Further horizontal parts available, please ask price. If you are not able to see what you need, please ask, we have not put the whole stock in place and probably the right one in stock. - Diameter 500mm built-in height 120mm with direct pitch over cam and angle scale - 2 pcs. diameter 400mm, can be used horizontally and vertically, indirect pitch for discs, once as good as new, once with bearing tracks Vertical sub-cameras and universal horizontal / Vertical pivoting sub-cameras 1. Walter with three-jaw lining 2. Lid with three-jaw lining and counter holder Special price

unused counter-holder for horizontal fraesening for WMW FQ400CNC The gnholder has a counter bearing for the reception of the long fraesdorne. Special price  ... more information

Mobile milling machine for attachment, e.g. a lathe. As good as new, almost unused condition More data according to photos  ... more information

Milling machine from a training workshop in very good condition Manufacturer lid Type FP1 Active  ... more information

Horiontaler Round Table, probably unused - with bearing traces Bearing traces are easy to remove, Geraet fully ready for use without restrictions! Diameter 500mm Partial installation via sub-discs, indirect division Geraet immediately available. Special price ... more information

Copying fraes machine Kuhlmann Type GM 1-2 Machine in very good condition. Optional: very extensive access at an additional cost Zubehoer s/he/sheers, milling spindles, sub-machines for circular copying, written fonts, fraesstichel with quick-change device, copy spin, Radient template for radii in 0.5mm rising, clamping devices, Stencils and much more! Special price Tool cabinets milling spindle spindle grasses engraving fonts brass copper table

Nut bumper head for attachment to a machine with SK40 tool holder. The tool is suitable for pushing grooves. Manufacturer: ETS Perez 69 VILL.NNE BREVET19015 TYPE127745 How spiral groove works Accessories various groove shock steels M.3, M.4, M.6, M8 T.45, M8 T80, M10 T.80, M10 T80, M12 T.80, M.16 T.82 Special price

Universal milling machine Lagun from a training workshop in top condition! Head universally rotate, swivel and tilt. Type: FTV2 YOC 2006 Tool holder SK40 Drilling pinole Coolant device Travel X-axis x00 mm Travel Y-axis x60 mm Travel Z-axis x40 mm Milling head type Vertical milling head Speed range 40 - 2000 mm/rev Table clamping surface approx. x00 x x00 mm T-slot size xx mm Feed X-axis xxx mm Feed Y-axis xxx mm Feed Z-axis xxx mm Weight approx. 1,850 kg Further data on request, rest according to photos Special price

Swivel part ingenous from Walter type HU 150E Peak height is 150mm. Direct divisions via perforated disc possible. Division 1 -24 Haohtcz Indirect sharing is no longer possible, a worm wheel is missing. Use on fraes and drilling machines For more information on request, please note the photos. Special price

Complete tilt clamping system 2 stueck tipping plates, stud and system covers, stoppers, pads, clamping strips, hoehenbloecke and much more. Length by width 2 piece 500400mm Holes 16mm Number of holes xxx stueck Distance of holes 50mm More data and photos on request Price and further information on request Special price

Tool-fraes machine Ruhla with very extensive trailer to be seen in top condition under electricity Type FUW Built in 1986 Tool holder SK40 stepless feed control Speed control via gearbox Weight approx. 1,800kg Accessories: Box table Quick-aeuferkopf with collet holder and collet set Fine drilling head with collet holder horizontal sub-apparatus universal sub-device SK40 with spiral-fraes device (probably unused) D2evxjf Counter-holder for horizontal fraes long fray edhism 2 stueck Further accessories at an additional cost. Special price

High-frequency Fraesspindel Precise Type PKZ 50/51 with SK40 for mounting in the spindle of a milling machine and collet holder for receiving the cutter. Speed range 15,000-60,000 rpm Manufacturer Precise Control unit PVSF1 Waerme exchanger PWK17-8 Spindle PK 50/51 without automatic Tool. fully operational Special price! More information on request

Spare parts from a Fraesmaschine Webo Roeperwerk type Gradumat Table size approx. 12501000mm, complete control Fanuc Y.O.M. 1987 such as board control panel, glass mass staebe, servoverstaerker, motors, ball roller spindles, feed motors, uvw. Price on request No more vertical head. Special price

colstress holder SK50 with inner suit thread In a suitcase with collets according to photos Special price Lid Hermle Weiler Meuser Kunzmann Wanderer Ruhla Weipert Wohlenberg  ... more information

Item tool holders for milling machine with SK40 (inner suit M16) DIN 2080 SK40-ER16 Long milling mandrels for Horzon valley milling in different diameters, partly with bearings Short milling mandrels for holding cutter heads Recordings with Morse cone in different sizes Everything according to photos

Universal milling machine vertically / horizontally from a training workshop Manufacturer Hermle Type FW801 Tool holder SK40 automatic feed in three axes Digital display in three axes Machine technically in very good condition under electricity ready for demonstration Technical data: Travel: x=350mm y=150mm z=220mm Spindle speeds from 50 to 3,150 rpm can be infinitely variable Feed speed infinitely adjustable via rotary pot from 10 to 5,000 mm/min, aisle Special price Used milling machine Hermle FW 801

HAAS VF-4 CNC vertical machining center built in 2022 in the USA, is the perfect choice for any manufacturing facility. The machine, which combines functionality, productivity and precision, achieves excellent machining results under even the heaviest loads. This is all due to its extremely stable construction with a large work area, which includes a high-speed spindle, a rotary table and a set of probes for tool measurement and workpiece setting. In addition, in order to fully utilise the machine’s potential and machining capabilities, the installed HAAS CNC controller has been retrofitted with a faster processor and many additional functions. The offered HAAS VF 4 CNC machining center has worked a small amount of time so far and is in perfect condition. The total weight of the machine is 6033 kg. Technical specifications of the HAAS VF-4 CNC milling machine - feeds in the X/Y/ ...

PLOT ELECTRONICS SENTINEL 2030 CNC milling machine was built in Poland in 2014. The machine, which is designed for precision cutting, drilling and engraving of materials, has a lightweight yet rigid design that eliminates any stress and guarantees very fast idling and machining feeds. The offer price includes extensive equipment, consisting of, among others, a reliable BECKER VTLF 2.250 vacuum pump, a high-speed spindle and a state-of-the-art CNC controller. To this date, the SENTINEL SN 2030 milling machine has machined PVC, PP and PE plastic sheets. The total weight of the machine is approximately 2000 kg. Technical data of the PLOT ELECTRONICS SENTINEL 2030 milling machine - CNC control: cncGraF Pro - number of axes: 3 (X,Y,Z) - feed in X/Y/Z axis: 2000/3000/270 mm - approach speed: 500 mm/s - table type: aluminium T-slot table + vacuum table - vacuum pump: BECKER VTLF 2.250/ ...