presses used for sale

Capacity: 250 ton Slider stroke: 400 mm Number of strokes per minute: 25 Table dimensions: 2500x1250 mm Slider dimensions: 2500x1250 mm Distance adjustment between table and slider: 250 mm Distance between table and slider in its lower and upper adjustment position: 800 mm Clamping plate thickness: 100 mm Hydro-cushion: -Force: 46 ton -Stroke: 160 mm Weight: 70 ton

pressure: 20 tthroat: 185 mmstroke: 100 mmtable surface area: 380 x 350 mmdayligth: 250 mmtable height over floor: 840 mmtotal power requirement: 4 kWweight of the machine ca.: 1,3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

working area: M16 mmshaft length: 26 mmquality: 4 Stufen 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

pressure:400 tthroat:520 mmstroke:20 - 200 mmno. of strokes:30 /mindistance table/ram, max. stroke up, adjustment up:680 mmtable surface area:1600 x 1000 mmtable height over floor:715 mmpassage to the back:1000 mmram surface:1300 x 800 mmram adjustment:130 mmpower requirement:38,0 kWweight:41,0 tdimensions (WxDxH):2,1 x 2,6 x 4,2 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:pneumatic, Ortlinghaus overload protection in ram:hydraulic ram adjustment:motoric ram counterbalance:pneumatic

pressure:063 tthroat:250 mmstroke:8 - 100 mmStroke rate:60 - 160 / minDistance table/ram, max. stroke up, adjustment up:415 mmTable surface area:710 x 500 mmHole in the table:250 / 280 mmTable height above floor:800 mmPassage to the back:290 mmRam surface:450 x 280 mmRam adjustment:63 mmWeight:4,3 tDimensions (WxDxH):1,5 x 1,7 x 2,7 minfinitely variable drive:PIV clutch:pneumatic overload protection in ram:mechanical

Netzsch Ceramic press #5346 Size 03 In good condition  ... more information

Specifications: Capacity 40 tons 2 strokes 57 + 86 H/min Projection 250 mm Plunger stroke 8 - 88 mm Plunger adjustment approx. 63 mm Table , WxD approx. 570 x 450 mm Max. installation height approx. 330 mm  ... more information

Bruderer Automatic Precision Punching Press. Type: BSTA 110H. Max. Pressure: 1100 kN (110 T). Speed range: 100 – 800 spm. Year of production: 1976. Fitted with roller-gripper feed unit BBV 320/200 on left-hand side. Max. strip width: 400 mm. Max. strip thickness: 12 mm. Max. feeding pitch: 200 mm. Adjustable stroke: 16-75. Ram height adjustment: 89 mm. Max. Tool width clearance between columns: 1170 mm. Weight of machine: cca. 26000 kg. Electrical cabinet and control. Oil pump. Oil cooler. Fitted with spring feet dampers. Front and rear safety guards with inspection glass.

Pressing force: 160 kN Impact stroke: 100 mm Mounting height: 350 mm Hole in the table: 100 mm Pushhole bore: 32 mm Stand passage: 650 mm Table size: 630 x 400 mm Hydraulic pressure: 280 bar electr. Connection: 380 V, 5.5 kW Space requirement: 1550 x 1050 x 2400 mm Weight approx.: 3 t  ... more information

pressure:500 tdistance between columns:3200 mmstroke:1250 mmdistance table/ram, max. stroke up, adjustment up:1810 mmtable surface area:3000 x 1900 mmpressure of drawing cushion in ram:150 tstroke of drawing cushion in ram:200 mmdrawing cushion area in ram:2400 x 1200 mmram surface:3160 x 1900 mmspeed down:400 mm/sspeed up:250 mm/sworking speed:18 - 58 mm/sheight over floor:6,5 mpower requirement:90,0 + 36,5 kWweight:110 tGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in ram:hydraulic

Nominal effort: 630 tons Course stroke: 420 mm Number of strokes in a minute: 20 Bolster plate-to-ram adjustable stroke: 180 mm Max. distance plate-to-ram (in lower position of slider): 750 mm Slider dimensions 1000x1000 mm Table size: 1250x1250 mm Dimensions of the hole in the table 800x800mm Thickness of the sub-stamp plate 180 mm Height above floor level 600 mm Main motor power: 56 kW hydropneumatic pillow in the table Press overall dimensions: -Length: 3280 mm -Width: 3470 mm -Height: 6190 mm Press weight: 52650 kg

VERTICAL PRESSURE: 2 x 315 T, HORIZONTAL PRESSURE: 2 x 200 T, VERTICAL STROKE - UPPER PISTON: 200 MM - BOTTOM PISTON: 150 MM, HORIZONTAL STROKE: 200 MM, OPERATION PRESSURE: 280 BAR,  ... more information

The force of 500 tons. stroke 305 mm. Adjust slide bar 254 mm. Distance between table and slide 485 mm. Distance between columns 3050 mm. Table size 2740 x 1370 mm. Pusher in table 155 mm. Maximum press height above floor level 6900 mm. Power 37 kW. Number of RAM strokes 12 strokes/min. Weight 93 tons.

pressure: 25 tthroat: 250 mmstroke: 100 mmram surface: 500x400 mmhole in the table: Ø 110 mmtable height: 850 mmtool hole in ram: Ø 40 mmram surface: Ø 150 mmweight of the machine ca.: 2,5 tdimensions of the machine ca.: 1500x2000x2200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 tthroat: 500 mmstroke: 150 mmtable surface area: 1000 x 800 mmram surface: 1000 x 800 mmdayligth: 400 mmtotal power requirement: kWweight of the machine ca.: tdimensions of machine L x W x H: 2,0 x 1,08 x 3,01 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 tthroat: - mmstroke: 8 - 90 mmtable size: 630 x 430 mmram adjustment: 60 mmno. of strokes: max. 65 Hub/mintotal power requirement: kWweight of the machine ca.: 2480 kgdimensions of the machine ca.: m- tiltable - table mounting plate - mechan. Overload protection in plunger (break plate) - pneum. clutchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 tthroat: 220 mmstroke: 8-80 mmno. of strokes: 140 Hub/minram - range of adjustment: 50 mmtable surface area: 500x410 mmram surface: 230x170 mmhole in the table: Ø 150 mmtool hole in ram: Ø 35 mmtable height: 900 mmweight of the machine ca.: 3 tdimensions of the machine ca.: BxTxH 1500x1500x2400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Pressure: 50 t - Working length: 2550 mm - Stand width: 2050 mm - Bending capacity: at 1 m - up to 10 mm - Space requirements (W x D x H): 2.9 x 1.6 x 2.3 m - Machine weight: 4200 kg - Total power: 4.5 kW - Condition: very good Details little run, very good condition, cylinders all tight, press control type PSSAS Accessories Miscellaneous bending tools, documentation, stands for tools

Inv. Num. : 4164 Type: LKT 250 Producer: SMERAL Created: 1977 Parameters: Pressing force: 250 t Table: 1575 x 1150 mm plunger stroke: 250 mm Stroke: 20/min Plunger adjustment: 100 mm Installation height: 750 mm Shock dimensions: 1380 x 850 mm Motor power: 28 kW Dimensions 2800 x 1240 x 4450 mm Machine weight: 23400 kg

pressure:125 tstroke:25 fix mmno. of strokes:70 - 700 /mindistance between columns:1150 mmdistance table/ram, max. stroke up, adjustment up:400 mmtable surface area:1150 x 1000 mmhole in the table:900 x 220 mmside window:650 mmram surface:990 x 850 mmram adjustment:60 mmmaterial width:250 mmmaterial thickness:2,5 mmpower requirement:46,5 kWweight:29,5 troll feed:mechanical, Schuler, WK 8-250