gear cutting and hobbing machines used for sale

Description: The system consists of: Face Plate , (diameter 2000 mm) Manipulator , AUBO ROBOTS, type Auboi5, equipped with camera weight approx.: 2,500 kg, Approx. Onsite Dimension. (l x w x h): 2,300 x 2,300 x 2,000 mm ... more information

Description: 6 baths weight approx.: 1,200 kg, Approx. Onsite Dimension. (l x w x h): 10,500 x 3,000 x 3,400 mm ... more information

Description: The system consists of: Mitsibishi robot, type RV-6SL-S12 (currently defective) , year of construction 2008 , payload 6 kg incl. control and control unit rotary table and the Rollscan 300 from Stresstech , set up as shown in the layout weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 3,450 x 2,359 x 2,200 mm

Description: SPECIFICATIONS Character: DMF Type: 8U300 Machine weight: 1,800 kg Measuring length: 300 mm Sheet thickness: 8 mm Machine weight: 1,800 kgweight approx.: 1,800 kg, Approx. Onsite Dimension. (l x w x h): 1,300 x 1,200 x 1,200 mm ... more information

Description: The Gleason-PFAUTER CNC Gear Shaping Machine P 1200 S offers an extensive working range and impressive technical data. With a nominal workpiece diameter of 1,200 mm for external and internal gears and a maximum workpiece diameter of 1,400 mm without a counterholder, it is extremely versatile. Control and Machine Number Control: SIEMENS Sinumerik 840D Machine number: 30 114 Working area Table diameter: 1200 mm Table bore: Ø 300 Workpiece specifications Max. orbital diameter: 1400 mm Nominal workpiece diameter (external and internal toothing): 1200 mm Nominal module max.: 16 mm Toothing width max.: 350 mm Shaping head specifications Max. stroke rate of shaping head: 80 min-1 Please take a look at the technical data and layout plans in the PDF file.max. wheel diameter: max. 1400 mm, module min./max.: max. 16, gear width: 350 mm, control: SIEMENS Sinumerik 840 D, tab ...

Ref. -No.: 10103Manufacturer: MAAGYear of construction: 1976Type of control: KonventionellControl: N/AStorage location: HalberstadtCountry of origin: SchweizMinimum number of teeth: 6 Max. Number of teeth: 300 Serial no.: 4216 Gear width: 200 mmMax. Pile driving: 225 mmMax. Wheel Diameter: 750 mmMin. Wheel Diameter: 30 mmTable Diameter: 500 mmMax. Module: 10 mmMin. Module: 1 mmSpiral Angle: 0/60 °

Automatic hobbing machine make MORAT type B 9for milling gears with spur toothinggr. workpiece diameter Magazine guide: 20 mmGr. workpiece diameter without magazine guide: 70 mmkl. Workpiece diameter: 1.5 mmgr. milling length: 40 mmgr. number of teeth to be milled: up to 360kl. number of teeth to be milled: 5Gr. Division: Module 1kl. Division: Module 0.1Pliers tension: 0.5 - 12 mmMain engine power: 0.5 hpPower return motor: 1/6 hpPower magazine engine: 1/6 hpWeight approx: 400 kgWith- compl. Change gear kit- 1 slider insert each- 1 additional gearbox for mehrgg. snails- 1 spindle insertdespite year of construction in very good, well-kept conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your querie ...

Gear milling machine / gear hobbing machine make NILES type RF 6 M 15Lizensbau Pfauter Chemnitz, year of construction unfortunately not visibleTechnical specifications:Wheel diameter to be milled for spur gears: 1500 mmmax. Milling to be milled: 15 Mod.Range of helical gear drm. at10 ° spiral approx.: 1500 mm20 ° spiral approx.: 1500 mm30 ° spiral approx: 1350 mm40 ° spiral approx.: 1060 mm45 ° spiral approx: 900 mm50 ° spiral "750 mm60 ° spiral approx.: 450 mmBurr turns per minute: 20-26-33-43-56-71-90-118gr. Outer diameter of the milling cutter: 200 mmDrm. Milling mandrels: 27-32-40 mmDrm. of the workpiece clamping mandrel: 60 mmRotation of the drive pulley on the machine per minute: 520Drm. the drive pulley on the machine: 500 mmWidth of the drive pulley on the machine: 130 mmPower requirement: 10 hpRotation of the engine: approx. 1000 rpmExternal dimensions of the machine: 320 ...

Hobbing machine make PFAUTER type RS 1Machine -No: 3108 built in 1941Technical specifications:largest diameter for face and worm gearswith / without counter holder: 400/750 mmlargest milling width for spur gears (up to 275 mm dia.over 275 mm diameter): 295 - 315 mmSmallest number of teeth to be milled: 12largest module division: 8Helical gearsHelical tooth angle: 10 ° 30 ° 45 ° 60 °largest millable wheel diameter: 750/600/500/200 mmMillable widths for the largest diameter: 270/270/270/270 mmmillable widths at Drm. under 275 mm: 260/250/245/235 mmClamping table diameter: 580 mmTable bore: 100 mmgreatest collet tension for shafts (large material passage64 mm): 65 mmsmallest axis distance between milling cutter and workpiece: 30 mmlargest axis distance between milling cutter and workpiece: 440 mmDrm. of the workpiece mandrel: 36 mmDrm. of the milling arbors: 27-32-40 mmLargest clampabl ...

External gears workpiece diameter, max.: 130 mm Gear width: 25 mm Module, max.: 4 mm Control: SINUMERIK 840 D Spindle rotational speed: 0 - 30 U/min Helix angle: +/- 45 ? Radial slide travel X: 230 mm Y-axis (column - cross): +/- 25 mm Stroke length max.: 30 mm table turning speeds: 0 - 1000 U/min ram strokes 500 - 2500 Hub/min total power requirement 49 kW Machine Weight: 11500 Kg Required space (W x D x H) mm: 6400 x 4500 x 4400

External gears workpiece diameter, max.: 130 mm Gear width: 25 mm Module, max.: 4 mm Control: SINUMERIK 840 D Spindle rotational speed: 0 - 30 U/min Helix angle: +/- 45 ? Radial slide travel X: 230 mm Y-axis (column - cross): +/- 25 mm Stroke length max.: 30 mm table turning speeds: 0 - 1000 U/min ram strokes 500 - 2500 Hub/min total power requirement 49 kW Machine Weight: 11500 Kg Required space (W x D x H) mm: 6400 x 4500 x 4401

Hob: External gears workpiece diameter (tip diameter), max.: 100 mm Minimum circle of shell end mill arbor: 22 mm Maximum tooth length 180 mm Maximum length 140 mm Trolley race: Radial stroke (X axis): 90 mm Tangential stroke (Y axis): 80 mm Axial stroke (Z axis): 400 mm Races of auxiliary trolleys: Loading portal (X5 axis): 2268 mm Sliding headstock (Z4 axis): 360 mm Maximum swivel angle of the milling head: Direction -A: 45 degrees Direction +A: 118 degrees Work table: External diameter: 120 mm Bore: 40 mm Machine size(LxWxH): 5195 mm x 3142mm x 2928 mm Feed rates: X axes, and Z: 1 to fast forward mm/min Rapid traverse: X axis: 7500 mm/min Y axis: 5000 mm/min Z axis: 15000 mm/min Rotational speeds: Tool: 50 to 12000 rpm Workpiece spindle: 0 to 3000 rpmControl: SINUMERIK 840D sl Machine Weight: 8000 Kg