gear cutting and hobbing machines used for sale

groove width: 125 mmdrawing length: 1250 mmpulling force - max.: 5 tstroke length max.: 925 mmtable surface area: 550 x 700 mmworkpiece weight: 6000 kgcutting speed: 1 - 12 m/minreturn speed: 2 - 24 m/minfeed: 0,219 mm/DHtotal power requirement: ca. 5 kWweight of the machine ca.: 4 tdimensions of the machine ca.: 1,5 x 1,5 x 3 m- quick adjustment for the Feed- automatic return adjustment- Oil Tank with pump- 3 Tool Cabinets- large set of toolings + accessoriesTools for drawing length: bis 150 / 300 / 500 / 1000 / 1250mmas shown on picturesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: - mmtable width: - mmgrinding wheel diameter: 400 mmmax. width of grinding wheel: 50 mmtotal power requirement: 1,5 kWweight of the machine ca.: 0,3 tdimensions of the machine ca.: 1 x 1 x 1 mFor Pre-Dressing the Gear Grinding Wheels apart from the machine, particularly to profilegrinding wheels for two-flank grinding, module 12 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 650 mmgear width: 200 mmmax. module: 10 min. module: 1 work accuracy: DIN 6 clamping table diameter: 710 mmtable bore diameter: 150 mmnumber of strokes - stepless: 35,5 - 560 c/minmax. ram stroke: 230 mmfeeds: 3,55 - 40 mm/minradial feed: 0,8 - 9 mm/minwork-spindle diameter: 110 mmtotal power requirement: 28,2 kWweight of the machine ca.: 9 tdimensions of the machine ca.: 3,8 x 2,3 x 2,5 mGear shaping machine for the production of spur gears, forInternal and external gears - Built under licence from LORENZ and identical in construction to LORENZ LS 630complete Modernisation + overhaul in 2012 with:- new painting- new electrical system from Telemecanique- Counter Holder- Chip conveyor- Coolant unit- change gearsNot used in production again after overhaulThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 300 mmgear width: 250 mmmax. module: 5 max. workpiece diameter: 290 mmtip circle diameter: 130 mmcutter length max.: 220 mmtaper: Steilkegel ISO 40 milling arbors: D= 22,27,32,40 slide travel X-axis: 185 mmslide travel Z-axis: 200 mmslide travel Z-axis: 400 mmcontrol: SINUMERIK 840C deburring device: 1 feed speeds: X= 1-10000 mm/minfeed speeds: Z= 1-5000 mm/minspindle turning speed - stepless: Werkzeug 125-1250 U/minclamping table diameter: 300 mmtable turning speeds: 2 - 110 U/mintotal power requirement: 48 kVAweight of the machine ca.: 9,5 tdimensions of the machine ca.: 6,00 x 2,9 x 3,55 mParticularly suitable for straight and inclined cylinder wheels- Motorized milling head- CNC control Siemens 840Capprox. 87000h operating hoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 150 mmgear width: 100 mmmax. module: 3 min. module: 1 helix angle: - 40 / + 40 °grinding wheel diameter: 205 - 275 mmgrinding wheel width: 125 mmDressing tool - Ø: 123 mmGrinding speed: 80 m/snumber of teeth: 6 - 150 workpiece weight: 3 kgtotal power requirement: 38 kWweight of the machine ca.: 8 tdimensions of the machine ca.: mAll ball spindles and the main spindle were replaced in 2022, the spindle for dressing was replaced in 2023.equipped with:- Siemens CNC control Sinumerik 840D powerLine- VM 24 balancing & probing control- PROMOT loading portal - Kenfilt filter/coolant system14851h running hoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 80 mmgear width: 120 mmmax. module: 3 min. module: 1 control: SIEMENS 840 C total power requirement: 30 kWweight of the machine ca.: 7500 tdimensions of the machine ca.: mL I E B H E R RCNC – Controlled Gear Hobbing MachineType LC 82Baujahr 1995 Ser.-Nr. 0836______________________________________________________Gear-Diam. max. 80 mmModule Range 1 - 3 Helix Angle +/- 45 °Distance Table Center to Tool Center 15 – 160 mmHobbing Head Slide stroke vertical 250 mmTangential Travel / Shift Travel of Tool slide 180 mmMinimum Number of Teeth 3 (!)Hob Size max. Ø x length approx.  ...

max. wheel diameter: 900 mmgear width: 500 mmmax. module: 1 min. module: 10 total power requirement: 16 kWweight of the machine ca.: 8.500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

max. wheel diameter: 400 mmgear width: 280 mmmax. module: 1 min. module: 4 total power requirement: 15 kWweight of the machine ca.: 6000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

hobbing length: 1750 mmmilling width: 260 mmmax. module: 10 min. module: 12 total power requirement: 8 kWweight of the machine ca.: 4500 kgdimensions of the machine ca.: mD O N A U - K N A P P (Germany)Universal Automatic Rack Milling MachineModel UZFM – V 300 H Year approx. 1980 Serial No. 80-234xMax. length of rack 1,750 mmMilling travel / milling width cross max. 260 mmModule, steel / cast iron 10 / 12Table clamping size 275 x 1,850 mmMounting height below cutter, depending on cutter Ø 136 – 410 mmCutter Ø, min./max Ø 125 + 2 x cutting depth / Ø 160 mmCutter width max. floating / with support 50 / 140 mmCutter mandrel Ø max.  ...

max. wheel diameter: 400 mmgear width: 75 mmmax. module: 0,5 min. module: 6 total power requirement: 25 kWweight of the machine ca.: 7000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

max. wheel diameter: 80 mmgear width: 150 mmmax. module: 2,5 min. module: total power requirement: 10 kWweight of the machine ca.: 2400 kgM I K R O N (Switzerland)Fully Automatic Gear Hobber for Worm GearsModel A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15_____________________________________________________ _______max. gear- without feed magazine approx. 80 mmmax. gear- with feed magazine approx. 50 mmModule max. 2, / 2,5 Axial milling length approx. 150 mmmax. workpiece-mounting length approx. 200 mmMilling slide can be swivelled up to 90 degreesMilling cutter - 24 - 50/63 mmMax. radial distance of milling slide 0-14/18 mmMilling cutter adjustment max. 25 mmMilling cutter speed 212 - 2.000 rpmAxial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation  ...

max. wheel diameter: 80 mmgear width: 44 mmmax. module: 5 min. module: Control: SIEMENS 840 C adjustment axis angle shaping sp. - wp table: -0,5 - +0,5 °stroke range: 250-1.500 DH/mincentre distance table/shaping spindle: -15 bis +170 mmmax. stroke length: 55 mmmax. helix angle: 45 max. tool diameter: 180 mmfeeds:: feed rotation axis of workpiece (100 mm wp diam.): mm/minfeed rotation axis of work piece (100 mm wp. diam.: 10-15.700 mm/minfeed center axis of machine column: 1 - 3.750 mm/min: 23 kwvoltage: 400 Voperating frequency: 50 Hzcontrol voltage: 24 V DCtotal power requirement: kWweight of the machine ca.: 8,5 tdimensions of the machine ca.: 4,2 x 2,6 x 2,6 mequipment· stroke positioning adjustment controlled by CNC · stroke length adjustment mechanical-manually · machine is fixed to the ground with specific damping shoes (part of the delivery scope) · oil mist exhaust sys ...

max. wheel diameter: 180 mmgear width: 45 mmmax. module: 4 min. module: 0,5 stroke length max.: 0 - 52 mmspindle taper: innen MK 4 table diameter: 160 mmtable bore diameter: 75 mmno. of strokes: 355 - 630 Hub/minfeed range: 0,008 - 0,4 mm/Hubdimensions of the machine ca.: 2,30 x 1,50 x 2,36 mpower capacity: 6 kWweight of the machine ca.: 2.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 180 mmgear width: 45 mmmax. module: 4 min. module: 0,5 stroke length max.: 0 - 52 mmspindle taper: innen MK 4 table diameter: 160 mmtable bore diameter: 75 mmno. of strokes: 355 - 630 Hub/minfeed range: 0,008 - 0,4 mm/Hubdimensions of the machine ca.: 2,30 x 1,50 x 2,36 mpower capacity: 6 kWweight of the machine ca.: 2.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 420 mmgear width: 120 mmmax. module: 8 min. module: 0,5 control: BWO CNCno. of strokes: 32-800 Hub/mintotal power requirement: 50 kWweight of the machine ca.: 9 tdimensions of the machine ca.: 5,3 x 3,9 x 3,4 mMachines increase 100 mm intermediate plateautomatic Hublageverstellung automatic Hublängeverstellung 5 axis controlled machine BWO last type C, D, X, Z, L axes are CNCThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 400 mmgear width: 300 mmmax. module: 8 min. module: 0,3 control: Sinumerik 840 D number of teeth: 5 - 999 pressure angle: 14 - 30 °helix angle: -45 / +45 °workpiece weight: max. 300 kgx-axis: 490 mmrapid traverse X-axis: 15 m/miny-axis: 220 mmrapid traverse Y-axis: 5 m/minz-axis: 300 mmrapid traverse Z-axis: 5 m/mingrinding wheel diameter: 205 - 300 mmgrinding wheel width: max. 125 mmboring diameter: 160 H7 mmnumber of starts: 1 - 5 weight of the machine ca.: 12,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 1600 mmgear width: 700 mmmax. module: 25 min. module: 2 x-axis: 875 mmz-axis: 1000 mmcontrol: Siemens 840 Cweight: 38 tmilling arbors: HSK-B160 table load: 15 to tarbor support: 900 verfahrbartotal power requirement: 100 kWweight of the machine ca.: 27 tdimensions of the machine ca.: 7,9 x 7,4 x 4,0 mSonderfräskopf M2- Max Fräserdurchmesser 350 mm- Max Fräserlänge 375 mm- Max Fräserverschiebung 300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece dia.: 100 mmControl: Siemens 840D weight of the machine ca.: 5 tWorm milling head with toothed belt drive.With infinitely variable high-performance drive and maintenance-freebearing. Spindle with hollow shank taper for holding milling arbor withcounter bearing.- Workpiece spindle with direct and maintenance-free drive.Equipment:- CNC Siemens 840D- Cooling tank- chip conveyorProduct data :- Diameter : 100 mm- Nominal module hobbing : approx. 3.0 mm Endless screw milling : approx. 5.0 mm- Max. axial movement : 320 mm- Cutting head orientation : -45 / + 115 °- Main milling cutter max. diameter : 118 mm- Max. Max. cut-out length of the post cutter : 180 mm- Max. Mill movement ( shifting) : 160 mm- Max. Spindle speed of the workpiece carrier : 3000 t/mm- Min./max. distance between axes : 10/100 mm- Cutting head motor power : 14 kW- Main milling speed : 50-12000 t/mm- Weight : 5000  ...

max. workpiece diameter: 500 mmthreading length: 1250 mmmax. module: 12 min. module: 0,5 total power requirement: 8 kWweight of the machine ca.: 4,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

max. workpiece diameter: 500 mmthreading length: 1250 mmmax. module: 12 min. module: 0,5 total power requirement: 8 kWweight of the machine ca.: 4,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information