Manufacturer:
(Category: 1300)
Pneumatic conveying system for various types of powder, consisting of: feed hopper with lid and compressed air turbine vibrator (netter NCT 10), injector (Telschig 2' FOX 300-SCE-SS) and side channel compressor (Electric Sd 820, 7.5 kW, 9.0 m3/h, 420 mbar) with pressure limiting valve. Flow capacity: 375 kg/h, required conveying air: approx. 180 Nm3/h at 330 mbar.
Rectangular, stackable transport container in stainless steel 1.4301, filling volume: 500 l., permissible total weight: 1,197 kg, inlet: 560 mm , outlet via manifold with flange (without ball valve). Minimum wall thickness: 1.5 mm. ... more information
Attachment pocket filter with 12 m2 filter area (12 pockets, 500 mm x 1,100 mm each), 1.5 kW fan (1,500 m3/h) and jet cleaning, flange dimensions: 1,230 mm x 630 mm. Multiple identical units available. ... more information
High-temperature oven with a maximum working temperature of 1,800C and lowerable/swivel bottom. All sides of the furnace chamber are heated with Kanthal super elements (= MoSi2). Temperature homogeneity is achieved by downward removable U-elements. Operation with 3 transformers and thyristor control. Chamber dimensions: 500 mm x 500 mm x 500 mm (= 125 l.). The oven is practically unused (only about 50 fires).
Horizontal batch mixer in carbon steel design, hard metal lining inside, net capacity: Up to 800 l., drive unit: 37 kW drive, Flender gearbox and fluid clutch; equipped with 2 flanges for optional choppers. Shaft equipped with hard metal Becker shovels (mint). Incl. base frame for mixer, drive, clutch and gearbox. Sand blasted / complete repaint.
Lifting installation with 2 lifting tables (staircase layout), each table with 1.500 kg elevating capacity, lifting height: 1,2 m each, incl. base frame for upper table (1,5 m high), hydraulic power pack and switchgear cabinet. Tables can be operated separately, too. ... more information
Planetary mixer with infused tool, 2 mixing stars, 4 mixing buckets and scraper / emptying bucket. Maximum filling per batch: 2,250 l. / 3,600 kg, solid concrete output per batch: 1,500 l., workable grain size: 0 - 65 mm, with double-sided swivel valve outlet (hydraulicact). Incl. main drive motor 75 kW and many spare parts.
Pneumatic conveying installation for different kinds of powders, consisting of: Feeding hopper with cover and turbine vibrator (Netter NCT 10), injector (Telschig 2'' FOX 300-SCE-SS) and side channel blower (Elektror Sd 820, 7,5 kW, 9,0 mÂł/h, 420 mbar) with pressure limiting valve. Conveying capacity: 375 kg/h, required air flow: Ca. 180 NmÂł/h at 330 mbar.
Rectangular, stackable transport container in stainless steel 1.4301, filling capacity: 500 l., total max. weight: 1.197 kg, inlet: 560 mm Ă, outlet: Elbow fitting with flange (without ball valve). Wall thickness: 1,5 mm. ... more information
High temperature kiln with a maximum working temperature of 1.800°C and a descending / pivoting bottom plate. All lateral walls inside the chamber are heated by Kanthal Super heating elements (= MoSi2). Temperature homogeneity is achieved by the use of U-shaped elements that can be taken out downwards. Operating with 3 transformators and thyristor control. Chamber dimensions: 500 mm x 500 mm x 500 mm (= 125 l.). Kiln is in mint condition (ca. 50 firings only).
Pocket filter with 12 m² filtering surface (12 pockets, each 500 mm x 1.100 mm), 1,5 kW blower (1.500 m³/h) and jet cleaning unit, flange dimensions: 1.230 mm x 630 mm. ... more information
Planetary mixer with whirler tool, 2 mixing stars, 4 mixing shovels and scraper / discharging shovel. Maximum capacity per batch: 2.250 l. / 3.600 kg, hardened concrete output per batch: 1.500 l., processable grain sizes: 0 - 65 mm, with dual outlet (operated hydraulically). Incl. main drive 75 kW and many spare parts.
Intensive mixer with horizontally aligned mixing drum, 1,500 l. useful filling, with 45 kW inoperable drive (stern wirbler, 16 knives in 8 layers, 455 UPM), 2 x 11 kW star drive, 15 kW drum drive and 3 kW hydraulic unit for automatic closure / central ground emptying. Mixing drum lined with steel, wall-to-floor scraper made of carbide, mixing blades made of wear-resistant plastic. Mischer was overhauled by a specialist company in 2005; little has been going on since then.
High intensity mixer with horizontally aligned mixing pan, 1.500 l. net capacity, with 45 kW agitator (star-type, 16 knives in 8 layers, 455 RPM), 2 x 11 kW mixing star drive, 15 kW pan drive and 3 kW hydraulics aggregate for automatic discharge gate. Pan lined with C-steel, hard metal wall-bottom-scraper, shovels made of wear-resistant platic. Mixer has been fully refurbished in 2005; in good overall condition.
Robust fine rolling mill with 800 mm roll width and 800 mm roll diameter, incl. main drives, auxiliary drives, control cabinet and hydraulic unit for splitting. In regularly maintained condition, rollers without riefen. Available for an extra charge: Matching dust filter from Hellmich. ... more information
Fine rolling mill with 800 mm roll width and 800 mm roll diameter, incl. main drives and auxiliary drives, split adjustment manually. In regularly maintained condition, rollers without riefen. Available for an extra charge: Matching dust filter from Hellmich. ... more information
Roller crusher with 800 mm roller width and 800 mm roller diameter, incl. roller drives, auxiliary drives, switch box and hydraulics power pack for gap adjustment. In regularly maintained condition, rollers without ridges. Available at extra charge: Suitable dust filter by Hellmich. ... more information
Roller crusher with 800 mm roller width and 800 mm roller diameter, incl. main roller drives and auxiliary drives, manual gap adjustment. In regularly maintained condition, rollers without ridges. Available at extra charge: Suitable dust filter by Hellmich. ... more information
Vibration mill for iron-free ultra-fine grinding of slurries (70 - 78 % solids content), grinding chamber lined with rubber, 22 kW drive. Input size: Up to 5 mm; end fineness: < 4 micron. Used grinding media: 7,5 to. cylpebs, 20 mm x 20 mm (not included in scope of supply). ... more information
Built 1988. Pneumatic flat slide valve, in solid design, with rectangular flange mounting. Suitable for temperatures up to 120°C. In mint condition. ... more information