subcategories
(3rd category level)
Manufacturer:
(Category: 202)
Brand: Paoloni Type: T140 Motor power: 5 KW Milling mandrel : 30 mm Height adjustment milling spindle: 140 mm Speeds: 3000-4500-6000-9000 Spindle height adjustment: Handwheel adjustment with analog display Feed: HolzHerr 3 roll Option: Aigner integral stop ... more information
HOFMANN swivel spindle milling machine TFS 1200 Year of manufacture: 2004 S/N 127-01323 Manufacturer: Hofmann Bad Windsheim from a training company very good condition electric height and swivel adjustment manual height and swivel adjustment for fine adjustment analogue display for height adjustment, height adjustment 125mm Table size 1200 x 820mm and table extension 200 x 820mm Swivel range -5° to + 45 Spindle speed 3000/4000/5000/6000/8000/10000 rpm. Milling spindle D=30mm milling mandrel MK5 Engine 4.7 Kw / 6.3 hp Suction nozzle D=120 mm Side roller table with eccentric hold-down device and adjustable angle stop Height adjustable with handwheel CE mark Weight 1300 kg
SPECIFICATIONS: Machining length: max. 2500 mm Machining width: max. 350-900 mm COMPOSITION: Station I: Milling machine right-left (2 x 11 Kw) Station II: Milling machine right-left (2 x 5.5 kW) Station III: Grinding unit right-left (2 x 3.7 kW) Station IV Grinding unit right-left (2 x 3.7 Kw) EQUIPMENT: 8 pushers for machining 1 hydraulic pump 1 control box 1 control panel 1 protective grille
Machine type: Table milling machine Manufacturer: ELEKTRA BECKUM Model: TF 100 M 2.8 DN Built: 1998 Condition: ready for use Offer type: used machine Technical data: Table: 520 X 420 mm Speeds: 4000/6000/7500 rpm. Drive: 1.8 KW Comment: with an additional horizontal sawing unit (1.5 kW) for Two-sided machining with roller conveyor and lateral material guidance, everything can be easily dismantled Weight: 150 kg
SECOND-HAND CNC DOUBLE SIDED ROUND END TENONER BACCI TSD-E-NC14 - Working length mm. 1200 - Max tenon length 100 mm - Production: 2400 tenons/hour (1200 pieces/hour) - Tool rotation 9,000 rpm - Tenoning units motors (n.2) 8 hp (4hp each) - Touch screen NC control - With CSF loader - Safety net - S/N 800 - CE rules (year 2004)
SECOND-HAND DOUBLE SIDED ROUND END TENONER BALESTRINI MOD. PRO 15 CNC - CE RULES - Working length mm. 170 – 2000 mm - Max tenon length 80 mm - Production: 1800 tenons/hour (900-1350 pieces/hour) - Tool rotation 11,000 rpm - Tenoning units motors (n.2) 8 hp (4hp each) - With loader RBF 2 -Volt. 380/50 - S/N AO.118.88 - Year 2002
SECOND-HAND MUTILPLE HORIZONTAL MORTISER COMEC MOD. MMS/15-2000-CA - Automatic loader - Max. working length mm. 2000 - No. 7 spindles - Volt 380/50 - S/N 970406 - CE rules (year 1997) ... more information
SECOND-HAND ROUND END TENONER WITH 2 BENCHES BALESTRINI MOD. PICO - CE RULES - Max tenon dimensions 100x30 mm - Table tilt: max 20° - Workpiece fence max inclination 45° - Production: 600-700 tenons/hour - Tool rotation 9.000 rpm - Tenoning unit motor4hp -Volt. 380/50 - S/N F356M16 - Year 1995
SECOND-HAND HIGH SPEED VERTICAL MILLING MACHINE CAMAM MOD. FV/1T-1P -Volt. 380/50 - S/W 76 - CE year 2003 ... more information
SECOND-HAND TRANSVERSAL MILLING MACHINE FOR CHAIR COMPONENTS CAMAM MOD. FS-S/1U - CE RULES - Max tools diam. 200 mm. - Rotation speed rpm/1 500 - Motor 3 kw - Exaust hood diam. 100 mm. - Exaust air cosumption m3/h 900 -Volt. 380/50 - S/N 99008 - Year 1999 ... more information
SECOND-HAND MILLING MACHINE FOR CORNER SEATS COMEC MOD. FAS2 - S/N 951106 -Volt. 380/50 ... more information
Double-end tenoner Gabbiani TDA N64 (Ref. No. 509-2642) 380 V 50 Hz 92 A 49 kW Weight approx. 5500 kg Year of construction: 1979 L x W x H: 4000 x 5500 x 1700 mm The machine is in good condition, ready for operation Subject to changes, errors and prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12
Used milling machine Manufacturer: Zimmermann Type FZ0 (Fritzi) Built in 1986 with base cabinet with various milling cutters Total weight approx. 200 kg Location: 58730 Fröndenberg/Ruhr The machine can be viewed and tried out under electricity. We will be happy to send you more photos by e-mail. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we h ...
Used milling machine Manufacturer: Zimmermann Type FZ 1 Built in 1987 With brake Total weight approx. 500 kg Speeds 560/1,000/1,800/2,200/3,600/4,400/7,400/14,000rpm. Clockwise/counterclockwise rotation Table size 630x490mm Support table 490x400mm Longitudinal movement 420mm Transverse movement 420mm Head can be swivelled on both sides With rotary table With abb. Accessories (cutters, clamps) Location: 58730 Fröndenberg/Ruhr The machine can be viewed and tried out under electricity. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. ...
COPY SHAPER machine Type BALESTRINI C70N Max. working width mm. 360 Max. working heigth mm. 90 Feed : from 1 to 8 mt./min. ( automatic or pedal variation ) n.02 Router Shaft diam. mm.30 n.02 Router Shaft motor power Hp 5,5 each one n.01 Hydraulic advance variable speed motor net weight : kgs. 1100
Technical details: - Table dimensions (LxWxH): 2,500 x 800 x 890 mm - Max. extension of the additional workpiece support: 400 mm - Built-in spindle diameter: 30 mm - Spindle diameters: 30/35/40/50 mm (not included!) - Spindle speeds: 3,000/4,500/6,000/8,000/10,000 rpm - Speed display via light-emitting diodes - Max. opening of the work surface (diameter): 380 mm - Diameter of extraction nozzle milling fence: 120 mm - Diameter of suction nozzle under table: 120 mm - Height display for position of the milling spindle in the handwheel - Arc milling stop for curly workpieces with fine adjustment - Table extensions on both sides - Magnetic brake - Adjustable milling fence - Pressure device for milling fence Optional accessory: - Aigner integral stop - Cone spindle M5 - Right-left rotation according to CE standard - 1 x field feeder with right-left rotation and 2 speeds e ...
Hitachi chain moulder 110 V This article is in good working condition. The chain size is 30 mm and is out of focus. Chain mortiser for fast, clean, and precise nicks or cuts through holes in wood. Ideal for fences, sheds, huts, restoration and much more. ... more information
Makita chain moulder 7101, 110V This article is in good and working condition. Chain mortiser for fast, clean, and precise nicks or cuts through holes in wood. Ideal for timber-frame houses, sheds, huts, restoration and much more. ... more information
Code: 0135 Brand: CPL - ITALY Model: IF Cut- off milling machine for making parallel joints on drawers, various parts of furniture, wine and liquor boxes, cigar boxes, gift boxes and beehives for beekeeping Technical data: The parts are machined in packs automatically. Depending on the type of milling cutters, different types of joints can be made Working width mm 450 Unlimited working length Sawing unit: Blade diameter mm 250 - Motor Hp 4,5 - Blade transversal adjustment Cutter group: Diameter mm 180 - Motor Hp 7,5 N: 2 pneumatic clamping presses Operating pressure 7 Atm Overall dimensions: mm 1000 x 1100 x 1450 h Weight kg 720
- Handwheel adjustment of spindle height/angle - Spindle angle displayed via viewing window, swivel range -4 to + 45° - Right-left rotation - double-sided table extension to 2,000 mm - Engine power 5 kW - Speed 3,000 / 4,500 / 6,000 / 9,000 / 12,000 rpm (manually adjustable) - Suction nozzle Ø 2 x 120 mm - Emergency stop switch) - Power: 380 V, 50 Hz, 3~, 10.8 A - with 4-roller feeder