presses used for sale

L 45 Kw POWER 680 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

AUTOMATIC BRIQUETTING machine type COMAFER DINAMIC 85N second hand machine volt. 380/50 CE mark : Yes briquett diameter mm. 60 production from 40 kg. to 85 kg. / hour motor power Hp 7,5 net weigth kgs. 850  ... more information

Code: 0332 Brand: AMASPRES (ITALY) Model: 3000 Membrane press Working size: mm 3000 x 1300 Opening mm 500 Working height mm 250 Cover opening and closing with vertical pneumatic pistons This press is suitable for veneer of shaped pieces , such as window sash frames, curved pieces Upper heating with hot air Heating of lower side with hot air Consuption about 9 kwt Working cycle: about 10 min. Complete compressor for lifting of cover and under cover Processing prevacuum adjustable up to 6.5 atm The machine is equipped with time alarm, thermostat, thermometer, warning lights for calories and pumps Overall dimensions press mm 4100 x 1700 x 2050 h - Weight kg 1800 Overall dimensions depressor mm 1400 x 500 x 900 h - Weight kg 100

The pellet mill has been refurbished by us and is in as new condition. Die, roll assembly and V-belt are new. Engine power 2 x 110Kw The diameter 650mm Press width 105mm  ... more information

Pellet mill for ring DIE and two roll shell system. Inside diameter: 900 mm Active operating width: 138mm Active forming area: 3902 cm² Press roll Ø440/142 optionally dimpled or notched Front door Stainless steel front door with large opening angle. pneumatic operated overload bypass protection gate. Two knives with step less length adjustments integrated in the door. Machine housing All housing parts are cut by precision laser. The machine base, the base plate and the housing are welded and reinforced. Drive Drive via 355 kW-1200 rpm engine , timing belt Ø200/1900 - Beltdrive Motor and Motor cables not included. Equipment Central lubrication for roll assembly and main shaft Manual roll adjustment Overload protection provided by a safety pin Die of chrome steel X46 Cr13 with conical seat for an easy change of the die - Die is not included Adj ...

Furniture Door Frame Press V. Grum-Schwensen Type MTP Specifications: • Assembly of frame parts: fully automatic • External frame dimensions min. (mm): 120 x 120 • External frame dimensions max. (mm): 700 x 2500 • Custom size  ... more information

I sell several machines, equipment here. spare parts, etc. for woodworking, Forklifts, work platforms as well as accessories and spare parts for forklifts and work platforms. Therefore, be sure to check out my other auctions Briquette press briquetting press chip press Pressing unit without control WEIMA TYPE: TH50 Briquette diameter approx. 50 mm Motor power hydraulics 5.5 KW They only bid on the briquette unit incl. hydraulic power unit. there is no control. I still have a control for briquette press with LOGO module. This can be purchased at an additional cost. The power unit could not be tested. Will be sold as it says here. ( See pictures ACTUAL - condition) Prior viewing is expressly desired, just leave phone no. by mail, then I will get back to you for a viewing appointment. Subject to prior sale, all information is subject to change. The ma ...

Good Used Glulam Beams Press BUILD YEAR 2010 Hydraulic Preeslaenge 12 m Press height 1.3 m Machine like new  ... more information

I sell a press for adhesive wood gluing LISY DVORAK TH6, built in 2008. Material size 2600 X 1050 x 50mm 6 work surfaces, manual rotazion. 6 pcs hydraulic top pressures per area / pump 1.1KW 6 pcs manual pressures per area Self-weight 1350kg. Very good condition. Available the same.  ... more information

MSM VMP 3016 membrane press in TOP condition from 2021 Workpiece length: max. 3,000 mm Workpiece width: max. 1,580 mm Vacuum pump: 25m³/h Dimensions set-up: 3,350 x 1,810 x 910 mm Weight: approx. 450 kg There was very little use of the press. The membrane is in very good condition. #8058 Net price plus VAT

Pellet press 3-5 tons hour 2006 but very little used of the brand PTN 1100 150-300 Dutch make very very sturdy and very good condition with some spare parts, sale due to project dissolution  ... more information

Seehr well-preserved solid wood panels - gluing system TYPE PROFIPRESS P 3500-2 for max. wood length 3.5m Loading from the right in u-shape Year of construction 2003 General overhaul 2018 since then only test run Machine dismantled, on request with assembly against payment Seehr good condition immediately available

HOT PRESS type COLOMBO REMO HPC 8 / 160 second hand WITH SOLID STEEL PLATES Heavy-duty construction Hot water heating via a electric system on the back of the machine , not any connection needed , everything is included on the machine Total Kw for heating 25 Solid steel plates size mm. 3450 x 1400 n.08 pistons diam.mm. 90 max. thrust Ton. 160 specific pressure max. kgs.5 / cm2 opening mm. 660 emergency perimeter rope overall dimensions cm. 4500 x 2000 x 2700 H weight kgs. 8500

HOT PRESS Type KOLMAG useful size mm. 3000 x 1300 open mm. 450 n.06 cylinders volt. 380/50 weight : kgs. 4000 heating plan by water ... more information

Collier sleeves Fishbone CPM 16-2.5  ... more information

Collier sleeve Fishbone CPM 22-2.5 for pellet press  ... more information

Freshly revised Koller to CPM Press 3022 or 7022 Punched, 2 new bearings, new sleeve, new intermediate ring, filled with grease. rest used. Koller are no longer needed due to machine changes. 3 pieces Available  ... more information

Freshly Revised Koller to CPM Press 3022 or 7022 , Fshbone, 2 new bearings, new sleeve, new intermediate ring, filled with grease. rest used. Koller are no longer needed due to machine changes. 3 pieces Available  ... more information

HOT PRESS Type COLOMBO REMO 6/90 heathed by water useful size plates mm. 3000 x 1300 n.06 cylinders diam.mm. 90 open mm. 450 hydraulic pump motor power Hp 3 Thrust 90 Ton Volt. 380/50  ... more information

MEMBRANE PRESS type FISMA 2200 x 1300 . usata useful size mm. 2200 x 1300 cover opening and closer by pneumatic pistons volt. 380/50 with separate vacuum system ... more information