peripheral equipment (e.g. heating, conveying, drying) used for sale

Suction capacity: 2900 m3/h Engine power: 1,1 KW, 400V, 50 Hz, S1-chip bag contents: 200 l Connection: 1x140mm WJ-ASA-7  ... more information

Shut-off valve electr. "professional" Motor shut-off valve e/w galvanized Locking plate led to ball bearings 230v D= 220mm G&-4098-M385C  ... more information

Industrial suction hose Polyurethane flexible hose Industrial suction hose D = 80 mm linear meters of 10,50 EURO D = 100 mm linear meters of 13.90 EURO D = 120 mm linear meters of 15,50 EURO D = 140 mm linear meters of 18.50 euros D = 160 mm linear meters of 20.50 EURO D = 200 mm linear meters of 28.50 euros Continuous lengths 2,5m/5m/7.5m and 10 m available! (Hose length = solid state!) Special NET zzgl.19% VAT

I sell the vacuum wood dryer ISVE for about 5m3 of wood. Chamber Long 6m x Dia. 1,60m Trolley system. Wagon and plate condition very good ! Door to one side. Condition very good, worked very little Trolleys, plates and fans without any problems. Available soon.  ... more information

I sell the wood dryers NARDI for 30m3 wood. Control panel Nardi, a savings computer. Volume net wood 25-30 m3. 4 fans side by side Chamber 9x4x h.3m Door on each side, flow system. Without rails. Condition very good, worked very little Car, electrics and fans without any problems. Available same. Already dismantled.

I am selling a stacking system HOMAG BARGSTEDT TBH22/D/25/12, built in 2001. Destacking system One-sided guide Spout also suitable for pallets. Postural head vacuum shoe system. Vacuum system (with pump) Automatic loading. Entry table motorized roller system Exit table on the floor with lifting mechanism motorized roller system Exit table front roller system Enters feed roller stazion for quilted material. Security fences fully complete ! Working capacity Approx. 8 cycles / min Available right away. Ready for use, possible to test. With CE certificate and full documentation.

Description Brand N/a ID 7176 Status Active Price 100 € + VAT Location Oradea (RO) Used horizontal profile transport trolley, 9 levels. ExWorks. Price is negotiable. Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-743/177.040 ; +40-740/221.698 Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. (+40-740/221.698 ) Hablamos Español. Beszélünk magyarul. (+40-743/177.040 ) Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervam dreptul la greseli, modificari si vanzare prealabila.

Description ID U64.2 Status Active Price 100 € + VAT Location Oradea (RO) Tenons maker. ExWorks. Price is negotiable. Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-743/177.040 ; +40-740/221.698 Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. (+40-740/221.698 ) Hablamos Español. Beszélünk magyarul. (+40-743/177.040 ) Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervam dreptul la greseli, modificari si vanzare prealabila.

Specifications: Master and model inserts Length: 6.5 m Width: 2.3 m Number of lifting arms: 4 - heavy insertion arms - with built-in tapered rollers - Substructure in heavy steel construction - built-in roller rails - 4 strands with roller rails Condition as new, with functional review, to the exclusion of any Warranty

Specifications: Master and model inserts Length: 5.7 m Width : 1,7 m Number of lifting arms 5 - heavy insertion arms - Substructure in heavy steel construction - built-in roller rails - 5 strands with roller rails Condition as new, with functional review, under exclusion of any warranty

Complete sprinkler system manufacturer R-CON, Sweden The plant is in very good condition as only one annual test run was carried out. Service documents available, including all components. incl. safety tank for water 200 m3 (for compensation in case of external water interruption) 552 sprinklers 1.3 km water pipes 2-3 m distance between sprinklers New safety engines

Keller SMM 016,0 Extraction blowers Diameter 160/160mm Air flow rate 1200 Nm³/h 1.5kW  ... more information

Cellar Extraction blowers 1.8kW  ... more information

Weibert RLA 125 Clean air extraction system Rated volume flow: 1095 m3/h Minimum volume flow: 884 m3/h Max Vacuum: 2220 Pa Chip collection volume max.: 255 ltr. Engine power: 2.2kW Connection 50Hz: 400V Weight: 194 kg Dimensions in mm: 1100 x 830 x 1650 Suction nozzle diameter: 125 mm Height lower edge suction nozzle to the ground: 850 mm Max sound pressure level 73 db (A) G&STÜ-5131250

Hydraulic gripper for wooden beams with modular suction cups Load capacity kg: 700 Number of suction cups: 16 Dimensions of suction plate mm: 80 x 750 Procedure mm: 8000  ... more information

+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Industrial extraction system NESTRO NE160 manufacturer: NESTRO Lufttechnik GmbH type: NE 160 mach.-Nr.: 1041 year of construction: 1994 comm.-Nr.: 0549/210/100/0859 stock-Nr.: 1803 + Regular Price: 2.180,- € > Reduced Price: 1.090,- € BN + All prices are shown without taxes (net price) Technical Data (According to manufacturer) intake manifold Ø: 160 mm filter area: 11,5 m² volume flow: 1.780 m³/h (after cleaning) Negative pressure in front of ventilator: 3.000 Pa Minimal volume: 1.447 m³/h Negative pressure in front of ventilator: 3.550 Pa Negative pressure at connection: 3.100 Pa – (4,0 m hose length mit Ø 160) working temperature: 5° to 4 ...

with 12,000 m³/h air volume. Standard emptying in 3 containers of 200 litres each Reliable, quiet and easy to use. The FI series is suitable for the extraction of different staeube and spaene. Due to its efficient compact design, it is designed for use indoors and outdoors of workshops with minimal space requirements. The housing made of painted sheet steel, FILTER D 145 X H 1200 and the programmable, automatic compressed air cleaning system ensure an equal handling of the spades and bars. These are fed into handy, mobile metal housings with a viewing window for the fuel level indicator. Equipped with calming chamber for coarse particle separation at the entrance into the filter unit. The deduster is designed as a vacuum system for high suction performance and maximum fire and explosion protection with integrated Loesch water ring. The highly efficient, clean air-installed, sound-c ...

with 8,000 m³/h air volume. 11 KW fan 32 filter units Filter area 144 m2 Diameter of the filters 145 mm Deprivation via briquetting press with a nominal throughput of 100 kg/h Material-dependent  ... more information

with 8,000 m³/h air volume. 11 KW fan 32 filter units Filter area 144 m2 Diameter of the filters 145 mm Standard emptying in 3 containers of 200 litres each Installation dimensions 350 x 110 x h 245 cm Reliable, quiet and easy to use.  ... more information

with 6,000 m³/h air volume. Standard emptying in 3 containers. Reliable, quiet and easy to use. CLEAN AIR BLOWER 7.5 KW Filter area 30 m2 Footprint 350 x 110 x h 244 cm  ... more information