Manufacturer:
(Category: 302)
Used twin-screw, parallel, counter-rotating extruder by Amut model BA92 NOMAX. New 2011. Output: 270 - 370 kg/h Hours of operation: 53638 h Other details: - Diameter of augers 92 mm - L/D ratio 28:1 - Drive power 60 kW (400V, 50 Hz, 3 ph) AC - Two sets of screws -for ABS processing -for PVC processing - Number of cylinder heating zones 7 - Number of cylinder cooling zones (air) 4 - Number of heating zones for head and adaptor 5 + 1 - Built-in pressure and temperature measurement system for plastic mass - Thermal oil unit for thermostating the worms for PVC - Drive power of vacuum degassing pump 11 kW - Drive power of screw feeder 1.5 kW - Without control (subassemblies available according to the list)
Output: approx. 255 - 450 kg/h (manufacturer's information from brochures; depending on material and profile; DEGUMA assumes no liability for actual, product-specific output) Straight head on hinged flange, fastening via screws; NEW SEVA motor, new control system ... more information
A brand-new extrusion recycling product UMAC (EREMA Group) series READYMAC Type 1109 TVE for processing polyethylene (PE), polypropylene (PP), polystyrene (PS), polycarbonate (PC), and polyamide 6 (PA6), with screen changer type SW RF, for processing printed films. Fully equipped. Capacity up to 450 kg/h, electrics 240/400 volts, 50 heart, immediately available. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827
A brand-new extrusion recycling product UMAC (EREMA Group) series READYMAC Type 1109 TVE for processing polyethylene (PE), polypropylene (PP), polystyrene (PS), polycarbonate (PC), and polyamide 6 (PA6), with screen changer type SW RF, for processing printed films. Fully equipped. Capacity up to 450 kg/h, electrics 240/400 volts, 50 heart, immediately available. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827
Automatic double wheel reel suitable for pipes from 10-32 mm OD Manufacturer: NEXTROM /Maillefer Type: MWB 1300G Year of construction: 1998 Condition: "as it is", ready for operation. ... more information
As good as new. ... more information
Collin 3 zone Extruder 150degC max temperature with transformer ... more information
Used extruder in good condition with screw size: diameter 50 mm x 30v grooved intake and degassing zone Type RH 241-1-50-30v with DC drive 30.2 kW Built in 1993 Immediately available without control cabinet With control cabinet 4-6 weeks delivery time ... more information
Screws: 2x x 58 mm / 26D Engine: 250 kW DC Capacity: approx. 800 - 1000 KG Material: PE, PP, PS, ABS // Details: DC motor, concurrent, segmented screws and cylinders (2x x 58 mm / 26D), screw speed: max. 900 rpm, degassing, vacuum pump, BKG underwater pelletizing system OPTI-LINE 1 consisting of: Kreyenborg start-up, water box, cutting head, water circulation system, heat exchanger, process water tank, centrifugal Control: Siemens S7 with visualization
Material: PE, PP, PS, ABS, Year of construction: 2000 Capacity: approx. 100 – 300 kg/h Screw diameter: 2 x Ø 40.0 mm L/D: 40:1 Propulsion: 110 kW (DC) more details: synchronous, degassing with vacuum pump, screws and cylinders segmented, Strand nozzle, water bath, strand granulator. NEW control cabinet for heating and motor control (Siemens S7, touch screen) Optional: Side loading
Material: PVC // with degassing, counter-rotor, DC motor 29 kW, screw diameter 86 mm, L/D 16 Capacity: 150 - 250 KG/hr ... more information
Material: PE, PP, PS, ABS // Details: Screw diameter 2x 50 mm, L/D 32, DC motor 52 kW, Runner, segmented screws and cylinders, degassing, vacuum pump, screw speed: 400 rpm, strand nozzle, water bath, strand granulator. Power: approx. 150 - 250 KG/hr. ... more information
Material: PE, PP, PS, ABS + talc, fibers / Details: twin-screw extruder PLAMA ZSP 70, segmented screws and cylinders, DC motor 260 kW, degassing, vacuum pump, side feed, low temperature control unit SINGLE, 4+1 gravimetric dosing BRABENDER incl. working platform, screen changer GNEUSS RSF 150, start-up crossover, underwater granulation GALA MAP6 with cutting rotor, water system, heat exchanger, centrifugal dryer. Controls: SIEMENS S7 with screen visualization SIEMENS Multi Panel 270B Touch. Power: approx. 600 - 800 KG/hr
Material: PE, PP, PS, ABS / Details: three-phase motor 215 kW, segmented screws and cylinders, continuous rotors, screw diameter 50 mm, L/D 40, power: approx. 400 - 800 KG/hr, degassing, SIHI vacuum pump, gravimetric belt scale K-Tron WF 300 with stubble, strand nozzle, continuous cooling belt, cooling tank, squid granulator Scheer SGS 100, moisture measuring unit, control unit Siemens S7 with visualization.
Material: PE, PP, PS, ABS Details: DC motor, segmented screws and barrels, screw speed max. 300 rpm, degassing, vacuum pump, mass pressure and mass temperature sensors. Control cabinet for heating and motor control (NEW. Siemens S7) Screw Ø: 2x 130 mm L/D: 35:1 Motor: 500 kW (DC) Optional: side feeding, screen changer, GALA underwater pelletizing
Material: PS, PE, PP, PA, // Details: DC motor 145 kW, screw revolutions: up to 600rpm, screw diameter 70 mm, L/D 32, segmented screws and cylinders, degassing (optional vacuum pump), control: Siemens S7 with visualization. incl. strand nozzle with water bath and strand granulator, motor up to 265kW possible. For extra charge: underwater granulation, or water ring granulation
Compounding system with GALA underwater granulation Material: PE, PP, PS, ABS // Details: segmented screws and cylinders, screw diameter 2x 40 mm, L/D 44, DC rotor, DC motor 104 kW with gearbox, worm speed: max. 1,200 rpm, 2-fold degassing, ground pressure transducer, start-up valve, water box, Gala A1PAC6 underwater granulation with water circulation system and centrifugal dryer, temperature control unit SINGLE STW 150/1-6-100-NS/E, 6-fachimetric dosing incl. control. Control: Macromatex. Power: approx. 200 - 400 KG/hr
Hollow-chamber plate system Material: PC, PP Extruder: Breyer Screw diameter: 120 mm, L/D: 33 Engine: 200 kW with degassing, Siemens "Simatic OP17" PLC control, vacuum station with water ring pump and condensate pots, sieve changer Gneuß SF75, melt pump Maag 56/56, calibrator OMIPA 2400 mm, 10-fold multi-roll extractor OMIPA, 2 roll extractor OMIPA, protective film laminating station, hot-knife longitudinal separation, OMIPA cross saw 2400 mm R