thermoforming machines used for sale

Form, fill and seal machine for berlingots Form, fill and seal machine for berlingots (with or without spout) of flat pvc or eva film or any film that can be sealed by radiofrequency. Radiofrequency sealing system that allows a very good quality of longitudinal sealing and transversal sealing/cutting. Fully PLC controlled and all operating parameters can be adjusted from the touch screen. Thanks to its specific dosing unit, any kind of aggressive products can be packaged on this machine. All parts in contact with the product are made of stainless steel. Production output: 1800 to 3000 Bags/H Bag volume: from 50 to 500 ml Bag length: 70 to 265 mm Max. outside diameter of the reel: 400 mm Inner diameter: 76 mm Including product outlet belt WIRING DIAGRAMS AVAILABLE

Multifunctional thermoforming machine CK-660D. Specifications are shown in the photo. It also has stamps for the production of disposable tableware (glasses, plates ...) in the amount of 9 pcs. The price of each stamp is 75,000 rubles ... more information

THERMOFORMING forming machine for large plates. Purchased used years ago and only used a few times. It has been standing still for a few years, but it was functional. ... more information

Thermoformer Dixie Union - 15x31cm Adjusted film tensioner. Lubricated buttons. Change the lower part of the plastic suction cup. Installed new air hoses. Replaced bellows + adjusted knife. Tools, 15x31cm (2 compartments) ... more information

Fully automatic thermosealing machine that ensures packaging in a protected environment in a two-step mode, including automatic intraduction of containers, thermosealing and individual cutting of the packaging. Prepared for use within a temperature range of 0°C to 20°C, with an air humidity of up to 90%. Maximum film width: 430mm For Ø180mm circular format External dimensions: 4670mm x 1220 x h2000mm Currently 2 molds of 2 loads each are available. COMPLETE DOCUMENTATION AVAILABLE

Illig RV 53 thermoforming machine Year: 1988 Model: RV 53 Forming area (VxH): 500 × 350 Drawing depth: 100 mm Material thickness (min): 0.10 mm Material thickness (max): 1.40 mm Feeding systems: roll fed Fixed mobile table Machine in production The machine cycle is: heating, thermoforming, cutting.

Heat sealing line Thermosealing area: 800 x 330mm Maximum container height: 80mm With thermosealing body of 4 x Ø190mm Capacity between 80 to 140 ppm depending on the size of the trays. 380V + N Power: 13kW DOCUMENTATION AVAILABLE ... more information

Thermoforming machine Manufacturer: Multivac Model: R 530 Year of manufacture: 2001 Film width 547 mm (Jumbo roll) Advancement 612 mm With dual mold sets: Ø 140 mm (9x) with stamper 132 x 140 mm (12x) For gas pack Incl. gas mixer and oxygen measuring Incl. ink jet printer and label applicator Incl. a booster pump and 2 external back pumps With central lubrication The machine has been frequently maintained and overhauled and appear in extremely good condition

Manufacturer: Villa Model: NPO 120 Year of construction - 2002 Forming Area:: 560x500mm Film Width: 560mm Foil thickness: min 0,2mm - max.0.9mm Depth of draw pos/neg: 140mm Materials: PET, PVC, PP, PS, HIPS Condition - in use Location: Bucharest, Romania, 050192 Other details: - forming - cutting - the documentation in original + scan pdf. - we have the software saved - working pressure: 6 bar - voltage: 3x400V + N + PE, 50Hz - cycle time: min 5, max 18/minut - weight of the machine ca.: 1,2 t - space requirements of the machine approx.: 5,3x2,5x2,5m

I would like to sell this machine, because we have a different profile and we will never use it. The process factory was closed right after the pre owner bought this machine and it had been closed until I bought this factory last year. Only the trying period was run trough. If you see the pictures you can see a roll of wrapping foil on the machine. It is the trying foil. There are two support stands behind the thermoformer full of with packaging forms. Before you buy it I will make a full service on this machine with GEA company and i will give you the certification from it. Guarantee! The price is including 6 different moulding form (the original price is about 15.000 €/piece) If you have any questions please ask me Technical description: - forming with preheater - forming via compressed air and vacuum - flexible and rigid bottom and flexible top film - max. forming dep ...

Illig RV 53 thermoforming machine Year: 1990 Model: RV 53 Molding area (VxH): 500 × 350 Molding depth: 100 mm Material thickness (min): 0.10 mm Material thickness (max.): 1.40 mm Feed systems: roll fed Lower mobile table stacker Machine in production The stacker is incomplete, the top and bottom table components are missing. Cutting station fully operational, regeneration was 2 years ago, heating of the cutting station fully operational, upper and lower table in good condition, heating 100% efficient. Capacity approx. 25 cycles per minute. Cutting station regeneration, pump regeneration, chain regeneration, The drive for transporting the film has been replaced with a servo motor with an inverter

Automatic Vacuum - Deep Drawing - Blister Packaging Form – Fill – Seal” Machine with PLC (in German/English language). Fully lubrication system. Frequency converter drive. Discharge conveyor belt, height-adjustable. Pneum. Lifting devices: 4 rollers for forming & sealing tools / each. very low price, the seller will take care of the loading packing and transport to your place

DESCRIPTION KIEFEL Model: KL 1 SH 52 BFS + KVH 83 Preheating Model type Nr.34.322-08.35, Identity.Nr. 100-035, Tp-No. 157/93 Year of construction - 1993 Forming Area: 540x420mm Film Width: 570mm Foil thickness: min 0.2mm - max.3mm Depth of draw positive / negative : 140mm / 140mm Materials: PET, PVC, PP, PS, HIPS Condition - in use, in production Location: Bucharest, Romania, 050192 Other details: - Number of stations : 5 - Preheating, Forming, cutting in mold, punching, stocking. Preheating for PP foil, model KVH 83, 2050/2200 / 2550mm, Length 2950mm, Width 1400mm, Weight 700Kg, max 150 Celsius degrees - the documentation in original (5 books) + scanned (PDF files) - a lot of spare parts - we have the software saved - working pressure: 6 bar - voltage: 3x400V + N + PE, 50Hz - dry ...

ULMA TF-100 stainless steel thermoforming machine Description TF 100 thermoforming machine for packaging food or medical products. Packaging is created on the machine using rolls of flexible or rigid film. If desired, gas and vacuum injection (MAP) can be performed inside these containers. The TF series is the ideal solution to move from manual to automatic packaging systems, obtaining in a more economical solution the same advantages that are achieved over the traditional system with any larger thermoforming machine. Its characteristics make it the most suitable solution for medium productions, adapting with its standardized configurations to the different needs of each client. Its versatility, ease of use and change of formats also make it the appropriate answer as a support machine for the packaging of various products, or as a dedicated line for medium productions. Coil width: 330  ...

Automatic Roll-Fed Kiefel KMV 50D machine Year: 2002 Maximum forming area: 500 x 350 mm Minimum forming area: 300 x 100 mm Max tool dimensions: 516 x 366 mm Forming height above - below Material: 120/40 mm Suitable materials: PS, OPS, EPS, PP, PE, PVC, APET, CPET, RPET Maximum sheet width: 545 mm A / B stacker Pressures Max. Max. 2.5 bar Cycles / min: 35 Approx. Length: 10,300mm Approx width: 2100 mm Approx.Height: 2200mm Weight: 6700 kg Machine in production

Contact thermoforming machine GN 2220C Knife length (cutting force) 3810mm (150) for APET 6350mm (250) for other thermoformable materials Film width 595mm (23.5) max. Material thickness 0.15mm - 1.00mm (0.006-0.040) Max roll diameter 711mm(28) max dry cycles per min 30 max voltage 220V to 480V Control 24 V Power consumption 5.5 KW/hr (approx.) Compressed air pressure 6.8 bar (100 PSI) min compressed air consumption 1360 l/min (48 CFM) cooling water consumption 6 l/min @ 15°C - 20°C (1.5 gal/min @ 58°F - 68°F)

Supervac GK 663 B packaging machine Supervac GK 663B from 2014 2014 ... more information

I will sell a practically new machine for the production of foil gloves. Connected for testing purposes only. To see in Łochów, province. Masovian Voivodeship ... more information

Dozing and thermoforming high speed packing machine, capacity 3000 pcs/h; 4 cases/cycle; control PLC Mitsubishi A2; film width 320-620mm; roll diameter 450mm; top film sealable film like PA/PE; film width 300-615mm, roll diameter 400mm; with ELS labeling system; machine equipped additional with cross web-labelling system for labelling on top of the ready made package; stainless steel, never used, in original packaging; new price was 400.000 Euro ; ; The machine was never used and is in the original packaging

ULMA TF-Supra thermoformer ULMA thermoforming machine model TF-Supra It does not have a vacuum, currently used for medical paper lidding film. ... more information