subcategories
(3rd category level)
Manufacturer:
(Category: 706)
Bottle filler, make ICS, type: TPS 24/6K, with 24 filling valves and 6-head crown capper, adjust to 0,5 lt. NRW- and Euro-bottles, built 2002, was in operation until the end of 07/2022 ... more information
Labeler, make Krones, type: Vinetta 6-3-3/180, control range: 1.700 - 4.800 bph, for 0,7/0,75 lt and 1,0 lt bottles, with 2 stations for body-, shoulder- and back label, direction: right->left, built 1985 ... more information
Labeler, make Krones, type: Robusta 10-4-4, for ~20.000 bph, with 10 bottle dishes, 4 grippers and 4 glue pallets, adjust to 0,2 lt, 0,33 lt., 0,5 lt. and 0,7 lt. bottles, for body, shoulder and back label, with around safety casing, with Siemens S5 control, built 1997 ... more information
Labeler, make Krones, type: Bonamatic 1.240-20-4-4, with 20 bottle dishes, 4 grippers and 4 glue pallets, adjust to 0,7 lt. bottles, with 3 aggregates, for body, shoulder and back label, as too for neck ring and foot label, with cam-bottom adjustment, with around safety casing, with Siemens S5 control, built 1990
Bottle washer, make O+H, type: Contitact, for 12,300 fl/h, with 80 mm bottle cells, built 1987 ... more information
Bottle Filler and crown capper, make Krones, type: Mecafill VK2V 024-188/KK, 24 filling valves, Vacuum pump, Hot water injection before closing, 6 head bottle cap closing, Crown Cork feeder, electr. height adjustment, direction: counter clockwise / right to left, with Siemens S7 Simatic ET200M, built 1998
Bottle filler, make BKM, type: Varifill 40/10K/10PP-100, for 12.000 bph, with 40 filling valves, with 10-head crown capper and 10-head screw sealer (for MCA 28 caps), with double pre-evac, runs on 0,33 lt Longneck- and 0,5 lt NRW-bottles, direction: left->right, built 1994. ... more information
Complete palletizer, make Procomac, for 12x 1.0 PET cycle modular crates and Schrinkpacks, built 2000, with Fanuc robot, 1 palletizing head for modular crates, 1 palletizing head for Schrinkpacks, pallet magazine, pallet transport, required installation space approx. 150 m². ... more information
Kammerpasteureur, Fabr. Rico, type: 4.5, for 4 Euro pallets, steam-heated, in VA, insulated, with 2 fan motors, lifting door, control cabinet. Condition: used, cleaned, inspected ... more information
PVPP filter, Fabr. Schenk, type: HK 6 STR, for 25 hl/h, with 34 horizontal screens, 340 lt. boiler capacity, 5 bar, completely in stainless steel ... more information
Cold water tank, second-hand, Fabr. Gresser, net capacity: 400 hl; Total capacity: approx. 427 hl, in chrome-nickel steel 1.4301, insulated with 150 mm PU foam and covered with trapezoidal sheet metal, standing on a concrete base, for pressure-free operation, Brewing water tank, used, Fabr. Gresser, net capacity: 250 hl, total capacity: approx. 265 hl, in chrome-nickel steel 1.4301, insulated with 150 mm PU foam and covered with trapezoidal sheet metal, standing on a concrete base, for pressure-free operation, Extrusion Storage, Fabr. Gresser, total capacity: 169.20 hl, operating overpressure: 6 bar, in chrome-nickel steel 1.4404/1.4571, insulated with 150 mm PU foam and covered with trapezoidal sheet metal, standing on a pedestal frame, Ø: 2,140 mm, total H: 7,673 mm,
Bottle washer, Fabr. Krones, type: Lavatec KESK-212/22-80, 22 bottles/row, with 80mm Cell division, plastic cells, with attached control cabinet in stainless steel, built in 1999, L: 7,955 mm, W: 4,216 mm, H: 3,270 mm, already dismantled and stored ... more information
Labeling machine, Fabr. Krones, type: Universella 600-15, with 2 units for torso, chest and back label, for cold glue labelling, built in 2016, has already been removed and stored. ... more information
Wet spent grain silo, Fabr. VetterTec, for 10 m³ net capacity, made of mild steel St 37-2, outlet hopper inclination 60°, with Discharge screw 3.0 m long, with control cabinet and remote counting device, standing on supporting structure, with Vertical ladder, Ø: 2,500 mm, cyl. Height approx. 2,000 mm
Filtration plant, Fabr. Seitz Orion, 100 x 100, for 180 hl/h, factory overhauled in 2002, consisting of: - Diatomaceous earth frame filter, with 29 KG frame in stainless steel, external risers, sight glass fittings with pressure gauge, with KG discharge tray with screw in stainless steel, with KG dosing device - Sheet filter, with 150 VA plates, external risers, sight glass fittings with pressure gauge - Control platform between both filters, step at the KG filter - Control cabinet
2 x 300 hl storage tanks, Fabr. Schulz Bamberg, bobbin bottom tanks, 0.9 bar, coolable via 1 cooling zone in the Double jacket, insulated with 130 mm and stainless steel sheet, with manhole in the lower frame, sight glass in the upper frame, with spray head with pulled down cleaning line, outlet pulled forward, ladder bracket, Crane eyelets, height: 4.25m, Ø: 3.95m, built in 2003, expanded
Labeller, make. MAG, for 2,000 bph, with 1 unit, run on 0.5 lt. EURO bottles, l -> r, built 1994. ... more information
Bottle filler, make MAG, type: RPe 12/3, for 2.000 bph, short pipe filler pre-evac, runs on 0,5 lt. EURO-bottles, l ->r, built 1994. ... more information
with 60 rinsing stations, 80 filling valves and 14 head screw capper Capacity: 2.0 l dia 99.8 x H= 350.00 mm - capacity: 7,000 bph 1.0 l dia 81.37 x H= 276.17 mm - capacity: 14,000 bph 0.6 l dia 68.0 x H= 245.16 mm - capacity: 20,000 bph The filler and rinser will be completely dismantled. All gear wheels on the filler are brand new. So the main bearing will be renewed. The filling valves will be complete renewed into new generation neck holding filling valves. The product inlet pipe will be renewed. All types will be renewed. So the Alcoa screw capper will be complete dismantled and modified, with a pick in place system to handle 28mm plastic screw caps. The AVE rinser will also be complete dismantled and rebuild from the beginning. The filling valves of the filler are neck holding filling valves so the filler does not have lifting cylinders anymore. The complete bottle tra ...
Capacity: 25,000 ltr. / h Control system: Siemens S 5 mounted on stainless steel frame ... more information