peripheral equipment (e.g. heating, conveying, drying) used for sale

Suction fan Pipe of 300 mm Engine 4 kW The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Exhaust fan Tube ø 350 mm Fan ø ± 750 mm Engine 11 kW Built in 1995 Weight approx. 190 kg L x W x H: 100 x 80 x 100 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Extractor fan 4 Fagida MD Year of manufacture 2002 L x W x H: 80 x 60 x 80 cm Weight approx. 120 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Screw air compressor Atlas Copco GA 408 59.586 hours of operation Masch. No. ARP 230-128 Built in 1994 Weight 1.2 to L x W x h: 250 x 130 x 200 cm Fqe3oovyi 8 bar 30 kW 2925 / min 380 V 50 Hz This machine is been serviced annually by Atlas Copco. The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Filter system for ref. No. 235-1659 with bagging device for big bags L x W x H: 500 x 200 x 600 x cm Weight 2300 kg Built in 1999 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Filter system 14 x 5 filter L x W x H: 3000 x 1280 x 2100 mm With Shaker Built in 1979 Weight 430 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Used Heating Stove Int. Art. Ref. m3502 Manufacturer: Spänex Type: UL 39 RW Year of construction 1996 Power 45 kW Total weight approx. 650 kg Firebricks are good. Location: 59425 Unna The machine is welcome to be visited. We will be happy to send you more photos by e-mail. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on you ...

FIELDS AF-22 YOC 2003 Motor power: 2.2 kW (400V) Rated current: 5.3 A 2-Bag Suction 1 filter element Suction connection: 160 mm Wall incl. various pipe components (as shown) only complete - no retail sale without lattice box Dimensions according to manufacturer's specifications: 1,300 x 580 x 2,150 mm

Aspirator with 4 chip bags  ... more information

Strip stacking KUKA industrial robot with device / gripper arm for stacking strips Model robot: KUKA KR 150-2 Construction date: 2007  ... more information

Room extraction dust with extension unit and Octopus 20 workbench Further data on request or see photos  ... more information

Vacuum dryer model KVT 200, WW heated, length 6m, diameter 1400, little run with slide-in trolley, year of construction 1989  ... more information

Chip extraction unit model ASA 2 with 2 extraction filters and 2 filling bags Motor 2.2 KW Air flow 2300 cbm/h Year of construction 2011 with complete pipe distribution  ... more information

Suction with electric motor,intake opening D=150mm, blow-out D=115mm, motor 0.6KW  ... more information

Centrifugal chemical-resistant plastic Casing and impeller of fan are suitable chemical-resistant plastic and aggressive media in the process exhaust air. Manufacturer Hürner spark GmbH 35325 Mücke Atzenhain Type 16-RU 315 MN/0/1420 Factory No. 2-29191/00 Built in 1999 Air flow / volume 2166 / 1900 m³/h Power 1.50 KW, 1619/1420 RPM. Pressure difference PA 1287/990 Conrad Meiseberg home electric motor Type 90 L-4 DR No. 304987 3.4/6 A, 50 Hz, 1.5 KW, 230/400 V Star/Delta ISO F, IP55 1420 RPM., cos phi 0.82

Portable fan / exhaust fans Stratos Ventilatoren GmbH Fan with ABB electric motor 0,75 KW, 400V, 50 Hz, 1,9A, 2850U/min Used  ... more information

Weibert SA 205 Extraction system N E U machine extraction system SA 205 400V 2.2 KW (3 HP) Flow max. 2900 m³/h 2 dust nozzle 120 mm 1.7 m² filter area 1 chip bag 300 litres Fahrbahr Weight 70 kg G & WJ-SA-205  ... more information

Longitudinal receiver saw/multirip saw Width of rollers 550mm Number of Pulling Rollers 7 Drop chains with cleats Longest piece 610cm Total length 700cm Use behind a sawmill or multi-rip saw  ... more information

Extraction system L x W x H: 2450 x 1340, + distance pipe incl. engine 1400 x 2900 mm Built in 1988 Weight approx. 400 kg The system can be screwed apart. Disassembly by buyer. The system is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC systems + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Extraction system with 2 bags Connection ø 160 mm Fan 2,2 kW L x W x H: 200 x 70 x 220 cm Weight approx. 120 kg Built in 1982 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12