other machinery for waste disposal and recycling used for sale

TECHNICAL SPECIFICATIONS Manafacture: COMAC Designation: Dust control system / nebulizer Type: Akkua Jet 65S Version: with 5 m articulated arm, on trailer Year of construction: 2012 Range: approx. 65 m (significantly more in the wind direction) Rotation: 0-360º (hydraulic) Vertical adjustment: -15°/+50° (hydraulic) Area coverage (theoretical): approx. 13,300 sqm Water consumption: from 1,500 to approx. 8,000 L/h Number of nozzle rings: 3 pcs. (separately switchable) Number of nozzles per wreath: 52 pcs. Total number of nozzles: 156 pcs. Fan power: 11.5 kW Water pump power: 4 kW Water filter: at 100 μm (stainless steel filter) Operating water pressure: approx. 15 - 22 bar Connection electrical: 400V/32A CEE Control voltage: 24 V Connection water: 1" F Average air velocity: approx. 38 m/s Air flow rate: approx. 30,000 cbm/h Degree of protection of the machine: IP ...

TECHNICAL SPECIFICATIONS Manufacturer: SALA Description: Lamella thickener Type. LT 200-F5 Year of construction: 1992 Total volume: 86.3 cbm Drive Unit Type: SFL 20040 Working torque: 20,000 Nm Shaft speed: 0.4 rpm Gearbox Type: S.O.M. Planetary Gearbox Sheet thickness tank: 6 mm Flocculator: STAMO AB Flocculator power: 1.1 kW

TECHNICAL SPECIFICATIONS Manufacturer: DOPPSTADT Designation: Solids separator Design: Semi-mobile, hook lift system Type: GT 130 A Year of construction: 2019 Release medium: water Adjustable incline: up to max. 23° Drive type: Hydraulic Weight: 9,000 kg Transport dimensions (length/width/height): 7,346 x 2,500 x 2,921 mm SPECIFIC COMMENT - Machine for separating mixtures of materials made of buoyant and non-buoyant materials by means of water - Low operating hours - Robust and low-wear design of the machine - Compact transport dimensions as well as easy transport by hook lift truck

The HERBOLD plastcompactor is a system for the agglomeration of films, fibres, chips, dust and flakes. Poorly free-flowing waste is turned into an agglomerate with a high bulk density and good flowability, which can therefore be applied directly to extruders and injection moulding machines. The plant for sale has a main motor with 110 kw drive power and a throughput of 600 to 2000 kg/h depending on the feed material. All thermoplastics can be processed, even sensitive materials such as PET, PA, and bioplastics can be agglomerated without thermal damage or discoloration. The system consists of the feeding device with silo, the compactor, a re-cutting mill with sifting and fine material return On request, a pre-shredding can be offered that is adapted to the task Tests can be carried out in our technical center for suitability tests and sampling. We are the manufacturer of this  ...

Recycling machine trade AGICOM- Pedergnana OG, Technical data of the alligator shears S 900: Knife length: 900 mm Max. knife opening: approx. 510 mm Main drive: 22 kW Overall dimensions: L 4.2 x W 1.2 x H 1.7 m Total weight: 7.5 tons Manafacture: Lefort Overhauled used machine; Machine ready for use! On hand

AGICOM Recycling Machines: Used recycling plant for cables, composites, small electrical appliances. Plant components recycling plant CR300U used: Single Shaft Shredder MR1740 Granulator CMG4050 Zig Zag Separator Turbine Mill Ghibli 352 Separator SA200 Filter tower 16 sleeves Capacity approx. 300 kg/h/modular design

Recycling machine trade AGICOM-Pedergnana OG: Refurbished used machine, operational, in stock. Knife length: 900 mm Max. knife opening: approx. 510 mm Main drive: 22 kW Overall dimensions: L 4200 x W 1200 x H 1700 mm Total weight: 7.5 tons  ... more information

Recycling machine trade AGICOM- Pedergnana OG: Cable peeling machine MAXI 100 DEMONSTRATION UNIT The compact MAXI 100 cable peeling machine can be used to process cables with a diameter of 6 mm to max. 90 mm. Thanks to the tried-and-tested two-knife system, the cable insulation is cut open and the copper or aluminium core can be easily removed.

Recycling machine trade AGICOM- Pedergnana OG: Tabletop cable peeling device Junior, DEMONSTRATION DEVICE. The machine is ideally suited for extracting copper from the thinnest electrical cables (with rubber or PVC sheathing). Cable diameter: 2 mm to 28 mm  ... more information

Diameter cable: approx.18 to max. 180 mm Separation speed: approx. 32 m/min Drive control: approx. 11 kW Dimensions: approx. 1880 x 1400 x 1560 mm Weight: approx. 1,900 kg Knife adjustment: hydraulic Height adjustment: hydraulic Condition: used, operational  ... more information

Dry cleaner/ friction cleaner with 110 kW drive power. Throughput approx. 1 -2.5 t/h depending on type of plastic and material thickness  ... more information

Friction scrubber with stainless steel housing and stainless steel rotor. Drive motor 22 kW ... more information

Vibron channel Type DSS 800/20.0 Year of construction 03.2021 Width of channel ≈ 800 mm Height of gutter ≈ 250 mm Total height ≈ 890 mm Length ≈ 20,000 mm Motor power 5.50 kW was from the end of 2021 in operation until the beginning of 2023 for capacity reasons exchanged optionally also with sieves

Recycling of PET bottles and PET films: Film washing and drying system for processing small-cut polyester films. • Capacity 800 kg/h polyester • Little used, almost as good as new. • The machine is still in operation. • Incl. big bag bagging station. A shredder must be procured separately. This means that an almost fully equipped production plant can be purchased. Also Folien + Technik e. Kfm. D-73728 Esslingen Phone +49 1577 5329827

Reverse osmosis station. Manufacturer: Stilmas. Year of production 1997. The device is used to produce purified water using the reverse osmosis method. It consists of three parts: a pre-treatment system, a reverse osmosis system and a purified water storage and distribution system. Each part is connected in series with the other parts, which means that the reverse osmosis system cannot operate if the pre-treatment system does not supply it with water, and the cycle cannot operate if the reverse osmosis system does not supply purified water. Water to supply the installation is taken from the municipal water supply network. The efficiency of the device is 0.7 m3/h and the conductivity of the purified water obtained is < 4.3µS/cm2. PRELIMINARY CLEANING • 20 µm filter • softening columns (A 64A and A 64B) • Na2S2O3 (sodium thiosulfate) dosing system • NaOH (sodium hydroxi ...

Our company provide a Lefort C850T machine with complet refurbishment. The machine is a full extra machine has the following extras: -Full Tunner pusher -Window crosshead -Soft started -Oil Heater -Pre-feeder -Central Greasing system For our refurbishment we provide warranty, and man power for the assembling and commisioning. The Estimated delivery time will be end of May. In case of need, we can provide platform and cabin for the customer. Technical details: Cutting force:850T Hold down force:200T Pusher force: 120T Open Box Section: 8000x2400x1000 mm Closed Box Section:8000x1000x700 mm Lid cylinders: 4x175T Power Source: 2X182Kw Electric engine Own Weight:150T And what we done on the machine? Just a few examples: -Complet refurbishment of the shear head -At the box we changed: -- Wear plates in 4 sides -- Hinges -- 4 New lid cylinder completly -Complet Refurbishment of all pumps -Recon ...

Alpine dairymen curve machine, uses type SR28SL construction year 1994 ... more information

Steep screw conveyor, screw tube stainless steel Brand new screw helix normal steel, brand new bearing with stuffing screw With drainage area, sieve approx. 2.5 mm perforation Motor 4,00 kW, 53 rpm Screw helix diameter 560 mm, length 7540 mm, clear length of screw tube 7570 mm Infeed 900 long x 740 mm wide Outlet 400 mm diameter Previously used for shredded plastic waste

With upstream feed conveyor belt Working width 1000 mm Drive 11 kW ... more information

Machine type: friction washer / friction separator Manufacturer: NEUE HERBOLD GMBH Year of manufacture: NEW rotor diameter: 560 mm working length: 3000 mm Drive: 30 kW for integration in recycling processing plants - to wash plastic materials such as film flakes, foil chips, granules, PET bottle-flakes,...