- (19)
- Bed Milling Machines (40)
- Bevel Gear Hobbing Machines For Straight And Spiral Bevel Gears (3)
- CNC Bed Milling Machines (36)
- CNC Milling Centers (75)
- CNC Milling Machines (143)
- CNC Portal Milling Machines (35)
- CNC Tool-Milling Machines (31)
- CNC Universal Milling Machines (32)
- Collet Pods (1)
- Console Milling Machines (10)
- Copy Milling Machines (25)
- Cylindrical Gear Hobbing Machines, Workpiece Axis Vertical (5)
- Edge-Milling Machines (4)
- End Milling Machines (14)
- Engraving Machines (3)
- Gantry milling machines (4)
- Gear hobbing machine (9)
- Gear Tooth Chamfering Machines (1)
- Groove Milling Machines (4)
- High Speed Milling Centres (HSC) (5)
- Horizontal Console Milling Machines (23)
- Horizontal Floor Type Milling And Boring Machines (1)
- Horizontal Milling And Boring Machines (1)
- Horizontal Milling Machines (12)
- Horizontal Plano Milling Machines (1)
- Metal milling machines (2)
- Milling And Boring Centres (2)
- Milling Centers (2)
- Milling Machines (146)
- Multipurpose milling machines (4)
- Other Milling Machines (3)
- Plano-milling machines (1)
- Portal And Gantry Type Milling Machines (1)
- Portal Milling Machines (17)
- Profile cutters (1)
- Rotary Indexing Table Milling Machines (2)
- Round table milling machines (32)
- Single And Double Column Milling Machines For Long Workpieces (1)
- Single-cutter spindle moulders (1)
- Spiral Cone Wheel Cutting Machines (2)
- Thread Milling Machines (1)
- Tool Carts (3)
- Tool-Milling Machines (103)
- Tooth edge milling machines (1)
- Travelling column milling machines (26)
- Universal Knee-Type Milling Machines (121)
- Universal Milling And Boring Machines (26)
- Universal Milling Machines (126)
- Universal Plano Milling Machines (8)
- Universal Tool-Milling Machines (36)
- Vertical Console Milling Machines (8)
- Vertical Knee-Type Milling Machines (1)
- Vertical Milling And Boring Machines (1)
- Vertical Milling Machines (21)
- more
- abb (9)
- Abene (6)
- Aciera (31)
- ACME (1)
- AFM (1)
- AFM DEFUM (1)
- AGIE CHARMILES MIKRON (1)
- AGIECHARMILLES (1)
- AGMA (1)
- AJAZ (1)
- AKIRA SEIKI (1)
- ALCERA (1)
- ALCOR (2)
- ALESA MONTI (1)
- ALUGUSS (1)
- Alzmetall (3)
- AMADA (1)
- AMCO-SACEM (1)
- AMF (7)
- ANAYAK (17)
- ANGER (1)
- ARBOGA (2)
- ARES - SEIKI (1)
- ARES-SEIKI (1)
- AROWA (1)
- ASSFAG (1)
- AUERBACH (6)
- AVEMAX INDUSTRIAL (1)
- Avia (13)
- AVIA / MEXPOL (1)
- AWEA (6)
- AWEA - CNC (1)
- AXA (11)
- AXILE (1)
- AXON (1)
- BARBER COLMAN (1)
- BAUBLYS (1)
- BELKI (1)
- BEMATO (2)
- BENZ TOOLING (1)
- BERNARDO (5)
- BIMATEC SORALUCE (1)
- BIMT (1)
- BJM (1)
- BOHLE (1)
- BOHNER + KĂ–HLE (3)
- BOMAC (1)
- BRETON (1)
- BRIDGE MACHINERY (1)
- Bridgeport (9)
- Brother (8)
- BUSCH (2)
- BUSH OPTIBELT (1)
- Butler Elgamill (2)
- BUTLER NEWALL (1)
- BUTLER-ELGAMILL (1)
- BUTLER-NEWALL (2)
- BZT (1)
- CALVET (1)
- Carver (2)
- CAZENEUVE (1)
- CB FERRARI (1)
- CEVISA (2)
- CHEVALIER (1)
- Chiron (17)
- CIELLE (1)
- CINCINATTI (1)
- Cincinnati (3)
- CLARK (2)
- CMC (1)
- CMC ELGOIBAR (1)
- CME (18)
- CMM (1)
- CMS (1)
- CNC (2)
- CNC-STEP (10)
- COMAGRAV (1)
- COMAU (1)
- COMU (1)
- COPYMAT (2)
- CORIMPEX (1)
- CORREA (29)
- CORREA ANAYAK (1)
- CORREA/ANAYAK (1)
- CRIMAC (1)
- CSEPEL (1)
- CUGIR ROMANIA (1)
- Daewoo (3)
- DAH LIH (2)
- DAHLIH (1)
- Datron (2)
- Deber (2)
- Deckel (141)
- DECKEL DMG (1)
- DECKEL ERSATMONITOR (1)
- Deckel Maho (56)
- DECKEL MAHO DMG (1)
- DECKEL, STUDER, SAMECA (1)
- DECKEL-MAHO (9)
- DECKELMAHO (1)
- ... more
Manufacturer:
(Category: 103)
New in: 1995
used
Technical data: -Plate thickness up to 6-40 mm -Pipe Beveling min. Ã? 100 mm -Max bevel in one run 10 mm - speed 2.6 m / min -Drive 400 V / 2,2 kW -Space requirement approx. B T 550 x 500 x H 700 mm -Weight approx. 65 kg ... more information
used
5-axis machining center for milling and turning operations Specifications: Workspace: X-axis: 1500 mm Y-axis: 1500 mm Z-axis: 1100 mm A-axis: NC controlled C-axis: NC controlled and FD operation 260 min-1 Max. workpiece size: Diameter: 1600 mm Height: 1300 mm Workpiece weight: 3500 kg Table size: ø 1400 mm
New in: 2015
used
Specifications: Travel X/Y/Z: 300 / 200 / 350 mm Distance table spindle nose: 80 - 430 mm Speed range: 80 - 2200 1/min Table size: 600 x 200 mm Table load max.: 50 kg Tool holder: SK 30 Motor power: 1.4 kW Footprint, approx.: 1410 x 1150 x 1550 mm Weight, approx.: 500 kg ... more information
New in: 2012
used
CNC control Hurco Win Max Travel x/y/z 1270 mm / 660 mm / 610 mm Max. spindle speed 12,000 rpm Working surface 1,500 x 600 mm T-slot (mm) 6 x 18 x 100 Max. table load 1,350 kg Tool changer 40 – speed Machine weight approx. 9 t Space requirement approx. 4.8 m / 4.5 m / 3 m ... more information
New in: 2001
used
Stock number: 3896 PROCESSING Manufacturer: HERMLE , Type: C800 V Machines NO.: 14337, Year of manufacture: 2001 Specifications: Table size 1000 x 560 mm Large table load 1500 kg Longitudinal movement (X) 800 mm Transverse movement (Y) 600 mm Vertical movement (Z) 500 mm Spindle cone SK 40 Stepless spindle speeds 0-16000 rpm Spindle motor 25/16.8 Kw Total power 31 KVA Control Heidenhain 430 - 3 Axis Fabr. Operating hours spindle 9666 hours Accessories: Tool holders 2 pcs Operating instructions Length: 2700 mm, Height: 2930 mm, Width: 2210 mm, Weight: 7000 kg
New in: 2011
used
Year: 2011 - technically efficient, ready to work - after full service - 3-spindle - 2 copying templates - pneumatic profile clamps - infeed and outfeed feeders - cooling and lubrication installation ... more information
New in: 2011
used
- X: 760 mm - Y: 530 mm - Z: 560 mm - Table size: 1200 x 500 mm - Speed range: 12,000 rpm - Spindle mount: SK 40 - IKZ: 20 bar - WZ changer: 30 times - electr. Handwheel: yes - Chip conveyor: yes - Control: Siemens 828 D - Suction: yes - Operating hours: 17,500 h - Total power: 25 kW - Machine weight: 8 kg - Space requirement (W x D x H): 2.4 Ă— 2.0 Ă— 2.8 m - Condition: good, little run Details 4th axis, swivel table Accessories Documentation, no other accessories
used
Nice machine, but parts of the controls are missing. Mechanically very good condition Sell spare parts or complete machine ! Table, milling head, guides, spindles, measuring rulers, motors, electrical parts, control panel, ... or to convert to new control ! ... more information
used
Machine : Gear Hob 1 set of gear hobs 20 pcs. Angle of engagement 20 degrees Module : Set all sizes M 1 2x M 3 M 1.25 M 3.25 M 1.5 2 x M 3.5 M 1.75 M 3.75 M 2 M 4 M 2.25 M 4.5 M 2.5 M 5 M 2.75 M 5.5 M 6 Gear hobs : M 1 , 20 degrees , φ 70x50, 80% M 1.5 20 degrees, φ 54x56, 90%, M 2 20 degrees, φ 72x72 90% M 2.5 20 degrees, φ 60x65, 80% M 4 20 degrees, φ 90x78, 80% M 2.5 20 degrees φ 78x190, 30% M 1.6 30 degrees, φ 85x130, 90% M 1.5875, 30, φ 82x120, 90%
New in: 2010
used
Travel: X - Travel 750 mm Y - Travel 400 mm Z - Travel 500 mm Table 320 x 1270 mm Speeds 3800 rpm ... more information
New in: 2006
used
Workspace: Travel in X/Y/Z 300/200/350 mm Distance spindle nose table 80 – 430 mm Rapid traverse 1200 mm/min Working feed X/Y/Z manual 50-550 rpm Feed force in X/Y/Z manual kN Clamping surface (rigid angle table) 600 x 200 mm Max. table load (rigid angle table) 50 kg Vertical milling head: Speed range 80-2200 rpm Power 1.4 kW Tool holder SK30 Dimensions: Length x width x height 1150 x 1410 x 1550 mm Weight approx. 500 kg
New in: 1989
used
Maho, 700C Control : Maho 432, Year of construction 1989, Mounting SK40, Tool Changer Process : X-700, Y-450, Z-500, quill Machine can no longer be viewed under power. Has lost parameters! Would also sell spare parts, table, milling head, drives, control, ... ... more information
New in: 1989
used
Maho, 700C Control : Maho 432, Year of construction 1989, Mounting SK40, Tool Changer Process : X-700, Y-450, Z-500, quill Machine can no longer be viewed under power. Has lost parameters! Would also sell spare parts, table, milling head, drives, control, ... ... more information
New in: 1968
used
Collet set 15 pieces with drill chuck Vertical Drilling and Milling Head - T-Slot Width 12 mm Cutter head Coolant Setup x - travel 500 mm y - travel 200 mm z - travel 400 mm Feed: 5.6 - 238 mm/min with quill stroke Speed: 35.5 - 1800 rpm with rapid traverse Clamping area: 800 x 300 mm Total power requirement 16 A Spindle holder ISA 40 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.
New in: 2005
used
4 Spindle High Speed Train Milling Machine, Control : NUM, very few operating hours. Methods: X-300, Y-1130, Z-300, - 4-axis +/- 180 degrees 4 high frequency spindles : Precise 60000 / 160000 / 18000 / 16000 rpm , rpm Tool holder : Collets depending on the spindle Chip conveyor, ATC, recooling unit, external measuring system Renishaw Power consumption 41 kw
New in: 2005
used
- X: 650 mm - Y: 500 mm - Z: 450 mm - Table size: 1,100 x 600 mm - Table load: 450 kg - Speed range: 6,500 rpm - Spindle mount: SK 40 - Internal coolant supply: no - WZ changer: 38-speed - Controls: Heidenhain 430 - Spindle On: 6566 h - Program run: 6051 h - Machine ON: 31121 h - Total power: 20 kW - Machine weight: 5500 kg - Space requirements (W x D x H): 2.3 x 3.1 x 2.3 m - Condition: very good Details nice well-kept machine, ready for immediate use, the machine does not have a tool changer Accessories no other accessories, documentation
used
Qty.1 Second-hand milling (scalping) line Mfc.: Torrington Type: 30" Slab Miller Strip width: 30” – 762 mm Cutter Speed: 500 rpm Metal speed: 18 fpm (1.9 m/min.)) Capacity: min. ¼” max. 1-1/4” Thickness Entry thickness range: 13 – 20 mm ... more information
used
Qty.1 Second-hand milling (scalping) line Mfc.: Torrington Type: 30" Slap Miller Speed: 500 rpm – 18 fpm Capacity: 1,9 m/dk ... more information
used
New in: 2002
used
Deckel Maho Universal Machining Center CNC DMU 70 VL Deckel Maho Manufacturer [manufacturer]: Deckel Maho (DMG) Typ [ type]: DMU 70 VL [control unit]: Heidenhain TNC 430C Jahr [construction year]: 2002 Travel range [travel path]: X= 710mm Y=520mm Z=520mm spindle rotation speed: 20-18,000 rpm Main spindle power: 36 kW IKZ internal coolant supply Tool changer: 2 x 32 places Tool holder: SK 40 to DIN2080 Cooling system: Knoll Chip conveyor: 2 units/units Weight [weight]: 12.800kg Dimensions [needed space]approx. (L x W x H): 5.3m x 2.75m x 2.75m Technical documentation/documents available in detail