sheet metal working used for sale

Kingsland 40XM - Profile Steel Shears - Foot pedal - Various punching tools Specification - Capacity: 400 kN - Punching Ø x material thickness: 20x15 mm / 38x8 mm - Punching depth: 175 mm - Low profile: 200x13 mm / 350x6 mm - Angle profile 90° / 45°: 80x80x8 mm / 50x50x6 mm - Solid material round: 30 mm - Solid material square: 25 mm - U-profile: 75x38 mm - Working height: 1015 mm - Operating voltage: 400 V - Dimensions WxHxD: approx. 600 x 1450 x 1100 mm - Weight: approx. 950 kg

Schröder MHSU 1500/4,0 - Motorized guillotine shears - Motorized backgauge 750 mm - Hold-down device with hard rubber strip to protect polished sheet metal - Extended extendable support table - All-steel knife 2-flute - Punctures at a distance of 10 mm parallel to the lower knife over the entire course of the table - Selector switch for single and continuous stroke - Rear compartment protection according to CE via 3-beam light barrier and side protective grille -Foot switch - Year of construction 2013 Specification - Effective length: 1530 mm - Capacitance (Rm 400 N/mm²): 4.0 mm - Cutting angle: 2.7° - Stroke rate: 34 rpm - Drive power: 4.0 kW - Nominal power: 5.0 kVA - Power supply: 3x 400 V - Dimensions WxHxD: 2100 x 1410 x 2600 mm - Weight: 1250 kg

- Trumpf DA65 control - Year of construction 2000 Specification - Pressing force: 2300 kN - Bending length: 3060 mm - Installation height: 535 mm - Inclination: ± 10 mm - Free column passage: 2690 mm - Projection: 410 mm - Working height with lower tool 100 mm: 1050 mm - Table width: 200 mm - X-axis travel: 600 mm - Max. stop range X-axis: 860 mm - R-axis travel: 250 mm - Z-axis travel: 2310 mm - Stroke: 365 mm - Rapid traverse: 200 mm/s - Operating rate: 1 - 10 mm/s - Retraction: 135 mm/s - Hydraulic oil volume: 400 l - Electrical: 37 kVA - Pneumatic: 6 (±1) bar - Dimensions WxHxD: 3660 x 3095 x 2310 mm - Weight: 18210 kg

Manual Tin Shears / Guillotine Shears with Table - Heavy-duty design - Adjustable front stop 360 mm - with table and runway Specification - Max. cutting length: 630 mm - Table dimensions WxD: 630 x 540 mm - Front stop: 360 mm - Dimensions WxHxD: approx. 1000 x 1200 x 2000 mm - Weight: approx. 300 kg

Trumpf Trumatic L3050 + Liftmaster LMZ3050 CO2 Laser Cutting Machine + Loading & Unloading System - Trumpf Liftmaster LMZ3050 automatic loading and unloading system - Siemens Sinumerik 840 control system - Trumpf TLF 5000TM Laser - Laser power 5 kW - Table size 3000 x 2000 mm - Interchangeable table - Automatic nozzle cleaning - Year of construction 2004

Indumasch IS 25-500 - Punching machine - Holder for Trumpf punching tools - Digital position display for X and Y axis - incl. tools & accessories - Year of construction 1993 Specification - Capacity: 25 t - Max. sheet thickness: 6 mm - Max. stamp thickness: 90 mm - Stroke rate: 200 rpm - Projection: 510 mm - Motor power: 4 kW - Operating voltage: 400 V - Dimensions WxHxD: 1000 x 1770 x 1350 mm - Weight: approx. 2000 kg

Ostas SMR-S 2070x170 Premium - 3-roll sheet metal rolling machine with premium equipment Bending length: 2070 mm Capacity: 5 - 6 mm Standard equipment - Steel machine body ST-52 - large shafts made of certified steel with SAE 1050 (CK-45) - Chain and belt driven spiral gearbox for top and bottom rolls - Precision bending with brake motor - rear roller motorized - Manually extendable roller - Tape bending roller - Central lubrication system - Mobile control panel - Compliance with CE standards -User guide Included additional equipment - Digital display for lower roller - Digital display for rear roller - lower roller motorized - Hardened rollers - Extended roller shafts for fastening profile and tube bending rollers Optional equipment - Profile tube rollers Specification - Bending length: 2070 mm - Capacity with pre-bending: 5 mm - Capacity without pr ...

Pullmax E-230 - Hydraulic guillotine shears - Incl. operating instructions - Built in 1986 Specification - Max. cutting length: 3000 mm - Capacity: 7 mm - Working height: 1000 mm - Table width: 600 mm - Rear stop stroke length: 5 - 1000 mm - Cutting angle: 0.5 - 4 ° - Oil volume: 160 l - Engine power: 11 kW - Operating voltage: 400 V - dimensions WxHxD: approx. 3500 x 1980 x 2440 mm - Machine weight: 6800 kg

Ostas OPK 45 Premium - Profile & tube bending machine with premium equipment Standard equipment - Direct drive with gears -Steel frame - the two lower rollers are driven - the upper roller is idle - Hardened rollers - Shafts made of special steel material, hardened and ground - Horizontal and vertical working position - Roller shafts are hardened and ground made of special steel material - A set of hardened rollers - Adjustable guide rollers - Mobile control panel - Compliance with CE standards -User guide Included additional equipment -Digital readouts - 3-roller drive - Two-speed motor Optional equipment - Special rollers for tubes, profiles and angles - Angle bending rollersSpecification- Motor power: 0.75 + 1.5 kW - Roller Ø: 158 mm - Shaft Ø: 50 mm - Working speed: 4.5 m/min - Dimensions WxHxD: 775 x 1465 x 1035 mm - Weight: 420 kg

- Cutting length: 220 mm - Capacity: 4 mm - Cutting angle: 90 ° - Required power : 2.2 kW - Operating voltage: 400 V - dimensions WxHxD: approx. 850 x 1100 x 1100 mm - Weight: approx. 600 kg  ... more information

Trumpf TruLaser 5030 + Liftmaster LMZ3050 - CO2 Laser Cutting Machine + Loading & Unloading System Laser power:6000 W Working area:3000 x 1500 mm - Trumpf Liftmaster LMZ3050 automatic loading and unloading system - Siemens Sinumerik 840 control system - Trumpf TruFlow 6000 laser source - Laser power 6 kW - Table size 3000 x 1500 mm - Interchangeable table - Hinge belt conveyor - Operating hours beam: approx. 31000 h - Laser operating hours: approx. 57000 h - Year of construction 2013

Working length:1040 mm Sheet thickness: 4 mm Cutting angle: 1.6° Backgauge: 10 - 750 mm Number of hold-downs: 1 (13000N) Side stop: 70 - 850 mm Travel speed: 90 mm/s Projection (WxH): 20 x 125 mm Weight, ca.:1600 kg Dimensions (WxDxH), approx.: 1850 x 1870 (3120) x 1550 mm Equipment: - Motorized backgauge - Foot control - Emergency stop impact button -Operating instructions - Table widening

Pressure capacity 15 t Working area 1,000 mm x 2,000 mm Stroke rate 200 – 750 rpm Punching diameter 3 -12 mm Machine weight approx. 6 t Space requirement 3,000 mm x 5,000 mm Machine height approx. 2.3 m  ... more information

working width 2040 mm sheet thickness at 40 kp/mm² 4 mm Manual backgauge up to 600 mm Connected load 7.6 kW Machine weight approx. 3 t Dimensions L/W/H approx. 3.3 m / 1.4 m / 1.8 m Accessories: Bending tool with radii 3 mm, 6 mm, 7.5 mm, 10 mm

Working width: 3000 mm Sheet thickness: 7 mm  ... more information

Qty. 1 Second-hand slitting line – still on foundation! Mfc.: SUNDWIG Built: 1990 Materials: Cold rolled steel coil, Hot rolled steel coil, galvanised steel coil Strip width: 400 – 1,700 mm Thickness: 0.4 – 3.0 mm Coil weight: 32,000 kgs Tensile strength: max. 600 N/mm² Final strip width after slitting: 50 – 1,600 mm Coil ID (uncoiler): 508 / 610 mm Coil OD (uncoiler): 550 – 2,100 mm Coil ID (recoiler): 508 / 610 mm Coil OD (recoiler): max. 2,100 mm Hydraulic pressure: 120 bar Feeding speed at straightener: 15 m/min. Feeding speed: 30 m/min. Operation speeds: 30-150 m/min & 30-300 m/min.

Qty. 1 Second-hand skin pass mill Mfc.: Mannesmann Demag Sack Built: 1980’s Modernised in 1986 & 1993 Type: Duo Cold Rolling Mill – Non-Rev. Dia. 330 x 500 mm Material: Carbon steel, cold rolled and annealed Strip width: 80 - 470 mm Thickness entry: 4.0 mm Exit: 0.2 mm Decoiler Modernised in 1986 ID: 400 with segments 500 & 600 mm Spreading range: 370 – 420 mm Strip tension: 1300 – 65 daN Braking system: Generator Braking torque: max. 1300 daNm De-coiling speed: 2.5 m/sec. Coil cross section: 20 – 1880 mm² Coil weight per mm strip width max.: 10 kg Coil weight: 5.0 T Coil ID: 400 & 500 mm Coil OD: 600 – 1400 mm Roll dia.: 300 – 330 mm Roll length: 500 mm Roll force: 1850 – 2400 kN Min. roll force: 150 kN Hydraulic roll adjustment Adjustment stroke: 80 mm Adjustment speed: 1 – 3 mm/sec. Rolling speed: 2.5 m/sec. (150 m/min.) PLC syst ...

- Working pressure: min 6 - max. 7 bar - Machine weight: 170 kg - Space requirement (W x D x H): 0.55 x 0.55 x 1.4 m - Condition: very good Details for profile WICONA, system WICLINE 50E - 50EN, 60E, CODE:332.04.10 from vocational school, was hardly in use, as good as new  ... more information

Offer 24169 Specifications: - Max. working width 4050 mm - Max. cutting capacity St 40 13 mm - Cutting gap adjustment by hand - Number of hydraulic hold-downs 18 pcs - Motor - Back gauge positioning control 20 - 1000 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 15 rpm - Hydraulic drive 400 V / 30 kW - Space required including back gauge, without front support arms -ca. W 5400 x H 2250 x D 2250 mm - Weight approx. 16000 kg - with: - E-foot switch - Cutting Line Illumination - - Cutting Length Selection - Rear of the machine with light barrier safety

Oerlikon Oxytome 25 HPC oxygenic / plasma cutting machine, Year of manufacture 2008, Control HPC CNC Control, Travel X/Y 3000/1500 mm, Suction, 2 tables, filter system, Nertajet HP 125 cutting power source, Plasma cutting source OCP 150, oxy-fuel burner Oxycut Mach, Installation dimensions 9m x 7m