sieving machines used for sale

Vibrorinne MATEC vibrating mesh drive 4 4 kW, 3 x 400 V 50 Hz Pan nominal width 600 mm Gutter inner width 500 mm Trough depth 260 mm Extra deep OK built channel 480 mm Gutter length approx. 11'000 mm Transport speed nominal approx. 17 m / min Year 2018 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Screening machine Metso/CFBK Brand; Metso /CFBK Type: 18/50-4 Screening area : 5000 x 1800 mm - 4 deckers incl. springs & electric motor 22 kW.  ... more information

Screening machine Metso/CFBK Brand; Metso /CFBK Type: CC 108/4 Screen area : 6000 x 1800 mm - 4 deckers Drive: electric motor 22 kW.  ... more information

Hydraulic rescue scissors operated with hydraulic pump (630bar) internal combustion engine. To be used as e.g. cable scissors for use in areas without power supply. 1 set with fuel-powered hydraulic unit 1 hydraulic scissors 1 hydraulic spreader All the goods in very good, ready-to-use condition. Special price

Vibrorinne MATEC drive rear Overtime separation and â repatriation Vibro Drive 1 electric motor 3 kW Linder nominal width inside 500 mm Preparing for 1700 mm Linen nominal length 4000 mm Peasant sheet seal unit perforation 20 mm Weight about 560 kg Built in 2018, new The machine is in very good condition, operational. Changes, errors, intermediate sales reserved! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Builder: TERRA SELECT Model: T5 Motor: PERKINS 55 kW (75 HP) Transp. Data: L. 11.150 mm x L. 2.550 mm x A. 4.050 mm Operat. Data: L. 14.100 mm x L. 6.800 mm x A. 3.900 mm Year: 2005 Working Hours: 3.200 h Hourly Production: 120 m³/h Screening: TROMMEL L. 4.500 mm x D. 2.000 mm Hopper Height: 2.820 mm Hopper Capacity: 4.40 m³ Discharge Belts: L. 4.900 mm x L. 900 mm Fuel Tank: 300 L Weight: 15.400 Kg

USED TROMMEL FOR DOPPSTADT, KOMPTECH, TERRA SELECT AND SEKO IN READY DELIVERY: FOR T4 / T40: 10 mm SQUARE HOLE 6 mm THICKNESS (USED) 15 mm SQUARE HOLE 6 mm THICKNESS (USED) 15 mm SQUARE HOLE 6 mm THICKNESS (NEW) 20 mm SQUARE HOLE 8 mm THICKNESS (NEW) 25 mm SQUARE HOLE 8 mm THICKNESS (NEW) 30 mm SQUARE HOLE 8 mm THICKNESS (NEW) 35 mm SQUARE HOLE 8 mm THICKNESS (NEW) 40 mm SQUARE HOLE 8 mm THICKNESS (NEW) 50 mm SQUARE HOLE 8 mm THICKNESS (NEW) 80 mm SQUARE HOLE 8 mm THICKNESS (NEW) FOR SM 518 DOPPSTADT: 10 mm SQUARE HOLE 6 mm THICKNESS (NEW) 15 mm SQUARE HOLE 6 mm THICKNESS (NEW) 20 mm SQUARE HOLE 6 mm THICKNESS (USED & NEW) 40 mm SQUARE HOLE 8 mm THICKNESS (NEW) 50 mm SQUARE HOLE 8 mm THICKNESS (USED) 50 mm SQUARE HOLE 8 mm THICKNESS (NEW) 80 mm CIRCLE HOLE 8 mm THICKNESS (NEW) FOR SM 618 DOPPSTADT: 10 mm SQUARE HOLE 6 mm THICKNESS (USED) 20x25 mm RECTANGULA ...

Modell: PPK STADLER Motor: ELECTRIC Operative Data: W. 6.500 mm x L. 2.500 mm x H. 4.000 mm Hourly Production: 15 t/h N° Paddles: 2x 6 Pz Useful Length: 2.180 mm Power Consumption: 4 kW N° Fractions: 2 Weight: 8.000 Kg Treated Materials: PAPER / CARDBOARD  ... more information

Screening Machine Screening Technology 20/35-1 Brand: Siebtechnik Screen area : 3500 x 2000mm - 1 decker Drive: 11 kW electric motor  ... more information

Screening machine dbr conveyor technology Brand: dbr Fördertechnik Type: Horizontal Ellipses Screening area: 5000 x 1600 mm – 2.5 deckers Drive: E-motor 18.5 kW  ... more information

Screening machine dbr conveyor technology Brand: dbr Fördertechnik Type: Horizontal Ellipses Screening area: 6000 x 1800 mm – 2 deckers Drive: E-motor 18.5 kW  ... more information

Below you can see the first impressions of our mobile screening machine, which was designed for separation tasks in the outdoor area. The system can separate different types of material into two fractions, depending on the selection of the mesh widths, the degree of the sifted material can be adjusted. The two fractions are discharged into wheelbarrows via the outlets of the screening machine. For the removal of fine goods, the stern must be removed. The coarse material enters another wheelbarrow or a suitable container via a second slide. The mobile screening machine can be rented and purchased. Ready to drive 450Kg

Vibrating screening machine VS 1000-1 Decker: - Modular and expandable modular system - Dustproof and safe to work - External/internal screen frames depending on the equipment - Stable design - Easy disassembly and cleaning of all components - Set ready for connection and ready for operation - Conical bottom for the discharge of the fine material - Drive via motors with ATEX protection zone 22 (standard) - German operating instructions (other languages at extra charge) - Ball tapping cleaning incl. standard balls per screen deck (standard) Size (mm) 1000 Screen area (m²) 0.694 - 0.785 Interference circle diameter (mm) 1620 Drive power (kW) 1.25 Weight (kg) 248 - 330 1 deck (total height mm) 1275 - 1285 Screening machine for screening in 2 fractions. All wetted parts blasted from VA 1.4301 (standard) and glass beads. Seals Screen frame made of silicone material (s ...

Rubber balls as wear material for your screening machines, vibrating screening machines, tumble screening machines: Diameter: 30mm Material: EPDM, NR/SBR, silicone, PUR, silicone (detectable), polyurtehane (detectable) Quantity: 1 pack (100pcs) possibly small quantities Price: On request (Other diameters as well as materials and colors on request, only partially in stock, attention possibly minimum order quantity)

Deflector profile in various versions as wear material for your screening machines, vibrating screening machines, tumble screening machines: Height: 27mm Material: Silicone Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters as well as materials and colors on request, only partially in stock, attention possibly minimum order quantity)

Deflector profile in various versions as wear material for your screening machines, vibrating screening machines, tumble screening machines: Height: 27mm Material: Silicone Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters as well as materials and colors on request, only partially in stock, attention possibly minimum order quantity)

Rubber lids as wear material for your screening machines, vibrating screening machines, tumble screening machines: Outer diameter: 100 / 150 / 200 / 250 and 300mm Material: NR45 and silicone Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly with minimum order quantity)

Rubber lids as wear material for your screening machines, vibrating screening machines, tumble screening machines: Outer diameter: 100 / 150 / 200 / 250 and 300mm Material: NR45 and silicone Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly minimum order quantity)

SWECO seal as wear material for your screening machines, vibrating screening machines, tumble screening machines: Size: 30" / 40" / 48" / 60" Material: NBR Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly minimum order quantity)

SWECO seal as wear material for your screening machines, vibrating screening machines, tumble screening machines: Diameter: 996 7 1496 7 1996 Material: NBR/SBR 408 RED and NBR 60 HELL Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly minimum order quantity)