gear cutting and hobbing machines used for sale

max. wheel diameter: 400 mmgear width: 300 mmmax. module: 8 min. module: 0,3 control: Sinumerik 840 D number of teeth: 5 - 999 pressure angle: 14 - 30 °helix angle: -45 / +45 °workpiece weight: max. 300 kgx-axis: 490 mmrapid traverse X-axis: 15 m/miny-axis: 220 mmrapid traverse Y-axis: 5 m/minz-axis: 300 mmrapid traverse Z-axis: 5 m/mingrinding wheel diameter: 205 - 300 mmgrinding wheel width: max. 125 mmboring diameter: 160 H7 mmnumber of starts: 1 - 5 weight of the machine ca.: 12,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 1600 mmgear width: 700 mmmax. module: 25 min. module: 2 x-axis: 875 mmz-axis: 1000 mmcontrol: Siemens 840 Cweight: 38 tmilling arbors: HSK-B160 table load: 15 to tarbor support: 900 verfahrbartotal power requirement: 100 kWweight of the machine ca.: 27 tdimensions of the machine ca.: 7,9 x 7,4 x 4,0 mSonderfräskopf M2- Max Fräserdurchmesser 350 mm- Max Fräserlänge 375 mm- Max Fräserverschiebung 300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece dia.: 100 mmControl: Siemens 840D weight of the machine ca.: 5 tWorm milling head with toothed belt drive.With infinitely variable high-performance drive and maintenance-freebearing. Spindle with hollow shank taper for holding milling arbor withcounter bearing.- Workpiece spindle with direct and maintenance-free drive.Equipment:- CNC Siemens 840D- Cooling tank- chip conveyorProduct data :- Diameter : 100 mm- Nominal module hobbing : approx. 3.0 mm Endless screw milling : approx. 5.0 mm- Max. axial movement : 320 mm- Cutting head orientation : -45 / + 115 °- Main milling cutter max. diameter : 118 mm- Max. Max. cut-out length of the post cutter : 180 mm- Max. Mill movement ( shifting) : 160 mm- Max. Spindle speed of the workpiece carrier : 3000 t/mm- Min./max. distance between axes : 10/100 mm- Cutting head motor power : 14 kW- Main milling speed : 50-12000 t/mm- Weight : 5000  ...

max. wheel diameter: 400 mmgear width: 250 mmmax. module: 8 min. module: 0,5 root circle diameter: 10 mmnumber of teeth: 5 - 999 max.helical angle: +/- 45 °weight: 12.5 tcontrol: Siemens 840 DMachine is in very good condition, test reports available.CNC Siemens 840 DThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. workpiece diameter: 500 mmthreading length: 1250 mmmax. module: 12 min. module: 0,5 total power requirement: 8 kWweight of the machine ca.: 4,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

max. workpiece diameter: 500 mmthreading length: 1250 mmmax. module: 12 min. module: 0,5 total power requirement: 8 kWweight of the machine ca.: 4,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

max. workpiece diameter: 250 mmthreading length: 800 mmmax. module: 8 min. module: 1 total power requirement: 10 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: 3,05x1,75x1,60 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

max. wheel diameter: 1200 mmgear width: 1000 mmmax. module: 25/36 min. module: 1 Control: Siemens 840 D table load: 15 ttotal power requirement: 75 kWweight of the machine ca.: 24 tdimensions of the machine ca.: 6,5x4x3,75 mGleason-PFAUTER CNC hobbing machine P 1200 for gear cutting of cylindrical and worm gears worm gears and all other rolling profiles and shapes that regularly occur on the cylindrical workpiece circumference.Remark:Machine designed for external milling, large milling head M3. Machine with counter stand.Scope of equipment:- Basic machine P 1200, Siemens 840D PowerLine (XP)- Motorised milling head M3- Special speed series motorised milling head M3- Extended software for fault diagnosis- Main stand - raised 1000mm - 2 x fume separator make 3nine type EMMA- Chip scraper conveyor - Set of adjusting wedges- Dialogue program Milling in single-part process- Switching the machi ...

max. wheel diameter: 0-200 mmmax. module: 25 min. module: 0,5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

max. wheel diameter: 130 mmgear width: 25 mmmax. module: 4 min. module: 0,5 Control: Siemens 840 Dstrokes - infinitely variable: 500-2500 Hub/minstroke: 30 mmwork-spindle diameter: 85 mmtotal power requirement: 49 kWweight of the machine ca.: 11,5 tdimensions of the machine ca.: 6,4x4,5x4,4 mCounterhold without centerhydraulically operated counter arm andLinear guides.For automatic ring loader, with 4 stations The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 1200 mmgear width: 1000 mmmax. module: 25/36 Modulmin. module: 1 Control: Siemens 840 D PowerLinetable diameter: 1200 mmtable load: 15 ttotal power requirement: kWweight of the machine ca.: 24 tdimensions of the machine ca.: 6,5 x 4 x 3,75 mGleason-PFAUTER CNC hobbing machine P 1200 for gear cutting of cylindrical andworm gears worm gears and all other rolling profiles and shapes that regularly occur on the cylindrical workpiece circumference.Remark:Machine designed for external milling, large milling head M3. Machine withcounter stand.Scope of equipment:- Basic machine P 1200, Siemens 840D PowerLine (XP)- Motorised milling head M3 - Special speed series motorised milling head M3- Extended software for fault diagnosis - Main stand - raised 1000mm- Power clamping device - 2 x fume separator make 3nine type EMMA - Chip scraper conveyor- Set of adjustable wedges - Dia ...

max. wheel diameter: 1200 mmgear width: 350 mmmax. module: 16 min. module: 0,5 max. workpiece diameter: 1400 mmtable diameter: 1200 mmtable hole: 300 mmcontrol: Siemens 840D Powerlinetotal power requirement: 75 kWweight of the machine ca.: 24 tdimensions of the machine ca.: 5x3x3,8 mGleason-PFAUTER CNC gear shaping machine P 1200 S for the production of internally and externally cylindrical gears with internal and external teeth and other rolling profiles and moulds profiles and moulds that regularly occur on the cylindrical workpiece circumference and for the production of profiles in the single part process.Special version with hydraulic shaping head H1SCOPE OF EQUIPMENT:- Basic machine P1200S, Siemens 840D Powerline (XP)- Hydraulic shaping head H1- Signal light (3-colour)- Extended software for fault diagnosis- Telephone diagnosis system- Chip disposal through table bore- Set of adjus ...

max. wheel diameter: 250 mmgear width: 275 mmmax. module: 5 table diameter: mmweight of the machine ca.: 5 tchange gear, internal cutting head, normal head and tangential head.Video Link:http://www.youtube.com/watch?v=90urAqbFCTIPhotos:https://picasawe b.google.com/104950607176033391845/ModulZFWZ3000X30MmGearHobberThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

hobbing length: 1750 mmmilling width: 260 mmmax. module: 10 table size incl. water gutter: 460 x 2100 mmtable clamping surface:: 250 x 1850 mmcutter width - max.: 100 mmfeed of the milling slide, stepless: 0 - 500 mm/min.rapid traverse feeds: 3000 mm/minmilling head -swivable +/-: 30 °Rotation speed range of milling head, in 9 steps: 29 - 178 rpmMilling head swivable 2 sides helical gearcutting: 30 °total power requirement: 4 kWweight of the machine ca.: 4 tdimensions of the machine ca.: 4 x 1,85 x 1,85 mAccessories:Change gearsMilling arborsOperating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 300/400 mmgear width: 70 mmmax. module: 6 min. module: 0,5 total power requirement: 50 kVAweight of the machine ca.: 7,4 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

max. wheel diameter: 350 mmgear width: 160 mmmax. module: 10 min. module: 1 table load: 200 kgtotal power requirement: 8,5 kWweight of the machine ca.: 5900 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

max. wheel diameter: 400 mmgear width: 290 mmmax. module: 6 min. module: 0,5 weight: 4,6 tvoltage: 220/380 Vfrequency: 50 Hzdimensions: 3010 x 1800 x 2200 mmtotal power requirement: 17 kWWorking area:1. largest module to be milled 6 mm2. straight toothing a) Largest workpiece Ø 400 mm b) Largest length of toothing 290 mm3. smallest number of teeth to be milled for 1-speed sub-gear 6 with 2-speed gearbox 3Dimensions:1. Ø of the workpiece table 400 mm2. Ø of the table dimensions 80 mm3. diameter of the workpiece mandrel 36 mm4. largest clampable milling cutter: Ø diameter 160 mm Length 160 mm5. diameter of the milling cutter arbour 32, 406. centre distance between milling cutter and workpiece a) Largest distance 300 mm b) Smallest distance 30 mm7. drive cone for milling arbors MK 48. maximum milling cutter displacement: a) Tangential milling 120 mm b) Shifti ...

max. wheel diameter: 400 mmgear width: 290 mmmax. module: 6 min. module: 0,5 weight: 4,6 ttotal power requirement: 17 kWWorking area:1. largest module to be milled 6 mm2. straight toothing a) Largest workpiece Ø 400 mm b) Largest length of toothing 290 mm3. smallest number of teeth to be milled for 1-speed sub-gear 6 with 2-speed gearbox 3Dimensions:1. Ø of the workpiece table 400 mm2. Ø of the table dimensions 80 mm3. diameter of the workpiece mandrel 36 mm4. largest clampable milling cutter: Ø diameter 160 mm Length 160 mm5. diameter of the milling cutter arbour 32, 406. centre distance between milling cutter and workpiece a) Largest distance 300 mm b) Smallest distance 30 mm7. drive cone for milling arbors MK 48. maximum milling cutter displacement: a) Tangential milling 120 mm b) Shifting 100 mmThe data for this ad was created with ModulMWS - the software solu ...

max. wheel diameter: 90 mmgear width: 50 mmmax. module: 3 min. module: 0,5 Control: Siemens 840 C total power requirement: 16 kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: 2 x 2 x 2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

max. wheel diameter: 90 mmgear width: 50 mmmax. module: 3 min. module: 0,5 Control: Siemens 840 C total power requirement: 16 kWweight of the machine ca.: 7,9 tdimensions of the machine ca.: 2 x 2 x 2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information