other wood working machines used for sale

Brand-New, Still Packed, Pellet Mill, capacity 5 tons equipped with 6 heads  ... more information

Chipper WEIMA WLK 6 S Crusher from the German company WEIMA – after technical inspection – year of production 2008 –documentation – NEW KNIVES TECHNICAL PARAMETERS: infeed dimensions 800 x 2100 mm rotor diameter 315 mm rotor length 800 mm rotor speed 90 rpm V-rotor main motor 37 kW number of knives 42 pieces rotatable cutting blades 40 mm x 40 mm sieve fi 12 mm and 15 mm AUTOREWERS HYDRAULIC DRAWER pressure drawer height 275 mm diameter of the spigot fi 200 mm dimensions of the machine (length/width/height): 250 / 180 / 170 cm weight 1700 kg

Code: 0245 Brand: SCM Model: D 80/K Automatic double end tenoner for wood, furniture, custom-made furniture, panels, doors, frames, composite materials and various Technical data: Working width mm 2500 Min working width on 1 track mm 75 Min working width on 2 tracks mm 250 Working height mm 180 Electronic variable feed speed from 3 to 18 mt/min Rubber-coated tracks Working width programmable with NC Composition: Automatic belt scoring unit applied to the direct drive unit - Rpm 5500 Hogging unit: Motor Hp 7,5 - Rpm 3000 - Suction mouth diameter mm 150 Automatic spindle moulder unit: Motor Hp 5,5/9 - Rpm 3000/6000 - Suction mouth diameter mm 120 Control panel Compressed air Bar 6 Overall dimensions mm 4100 x 2000 x 1550 h

Code: 0242 Brand: GABBIANI Model: MODUL/80 Automatic double end tenoner for furniture, doors, kitchens, cabinets, window frames, panels, prefabricated houses, raised floors, composite materials, and various Max working width mm 3200 Min working width mm 150 Max working height mm 180 Operating units: 1° Upper blade unit - Motor Hp 3,2 - Rpm 2900 - Suction mouth diameter mm 120 2° Lower blade unit - Motor Hp 4,5 - Rpm 2850/5700 - Suction mouth diameter mm 120 3° Spindle moulder unit - Motor Hp 7,5 - Rpm 2900/5900 - Suction mouth diameter mm 150 4° Automatic spindle moulder unit - Motor Hp 5,5 - Rpm 2900/5900 - Suction mouth diameter mm 150 5° Spindle moulder unit - Motor Hp 5,5 - Rpm 2900/5900 - Suction mouth diameter mm 150 6° Spindle moulder unit - Motor Hp 7,5 - Rpm 2900/5900 - Suction mouth diameter mm 150 Feed speed variator Automatic shoulder opening with dis ...

Ott Edge Banding Machine Profimatik M 257-FÜ with pre-joining used, good condition Make Ott Type Profimatik M 257-FÜ Year of construction 2001 Banding thickness 20 / 25 mm Banding height 60 / 65 mm heated inlet ruler Thick edges up to 20 / 25 mm Caps from the roll up to 3 mm Pre-joining with DIA tools 2 x 1.8 kW Cross-cut unit 0°/20° - 2 x 0.8 kW Flush milling 2 x 2.2 kW Bevel milling 2 x 0.6 kW Radius milling 2 x 0.6 kW Radius Scraper Blade Copy corners 4 x 0.8 kW Grinding unit Edge finishing (buffing) Auto. Edge magazine Feed rate infinitely variable 8 - 24 m with motorized adjustment Granulate high-speed heating basin (EVA) Route control Program control with 98 programs Soundproofing hood Large roller support High-speed heating basin with automatic Synchronization and counter-rotation control of the glu ...

Specifications: Nominal capacity 5.089 m³/h Negative pressure 2,760 Pa (at V nominal. at the interface) Nozzle Ø 300 mm Filter area 32 m² Filter material BGIA (AWN16) H3 and GS tested Filter regeneration pneumatic (compressed air connection required on site) Motor power 7.5 kW Engine speed 2,890 rpm Sound pressure level 74 dB(A) Connection data: 400V, 50 Hz, 15.0A Dimensions: 3,650 x 1,540 x 2,570 mm Weight: 967 kg

Ceiling filter 160 B 10x10/20/101 - motorized shaking, 0.18 kW - Filter area 100.5 m² (BGIA Cat. G) - Filter 2000 x 160 mm, 100 pcs. - Extinguishing device - Weight 520 kg - Dimensions. 1,950 x 1,970 x 2,450 mm Chip keeper SPB2020 - Volume approx. 2.7 m³ - Dimensions 2 x 2 x 990 mm - Discharge screw - Agitator - Gear motor 1.5 kW Centrifugal fan S300 F/L2 11.0 kW - Nozzle-Ø 300 mm - Vol.Strom 5.300 m³/h, 4700 Pa - Protection class IP54, pos. GR 270 Fan 7,5 KW switchboard - Star-triangle circuit 11 kW - controls both fans and 1 x motor. Shaking All information is subject to the actual equipment

Type: 751 carton sealing machine top Type: 651 carton sealing machine below Machine is to the close of folding cartons with tape (top/bottom).  ... more information

Size: 3,000 mm x 1,200 mm -no attacks -without pressing cylinders  ... more information

MITRE Assembly typesetting machine with high frequency Miter cut length 100 mm for the gluing of frame parts with white glue Various machines in stock  ... more information

Motor data -1/1.9 HP -710/1420 RPM -380 Volt -3.7/3.8 amps  ... more information

Working width: 1400 mm Technical description: Operating side: right Working height: 900 mm, adjustable: +/-50 mm Width: 1400 mm EFF. Usable width: width 100 mm Clearance height: 120 mm Feed transport: 8.0 25.0 m / min frequency controlled Levelling roller: 0.7 5.7 m / min frequency controlled Material work piece: wood, wood, rigid Dimensions (min.) Thickness width length: 5 50 300mm Dimensions (max.) Thickness width length 80 1300 2000mm Tolerance max. Roller width +/-0, 2 mm Material coating: UV curable coatings and flowing coats Processing temperature: 18 ° c. Viscosity: up to 140 DIN sec, Ford 4 cups Drive type: Three-phase frequency inverter Power consumption: CA. 1,5 kW Mains voltage: 400 V / 50 Hz with power N-conductor Operating voltage: 400 V / 50 Hz Operating pressure: 6 bar, min. 5 bar max. 8 bar Weight: 1.300 kg

SECOND-HAND TOP AND BOTTOM CALIBRATING AND SANDING MACHINE TAGLIABUE MOD. L 600/11 - Working width mm. 600 - Useful working high 130mm - Min. thickness piece 3mm - Composition: Bottom: roller (80sh) + roller + air blower Top: roller (80sh) + roller + brush - Shoe pressers - Abrasive belts length 2620 - Vacuum device - Electrical panel - Motor 20kw - Max. working speed 24 m/min - CE rules (year 1999) - Dimensions 5300x1700mm

SECOND-HAND WIDE BELT SANDER COSTA MOD. 60 CC/2 1150 - CE RULES - Working width 1150 -Volt. 380/50 - S/N 951121/DR3 - Year 1996  ... more information

SECOND HAND SANDING MACHINE FOR TURNED PIECES GENINI MOD. LAR 90 - With automatic loader - No. 2 abrasive belts -Brushes - No. 6 spindles - Working length 900 mm  ... more information

SECOND-HAND CLAMP COUPLE FOR CHAIR ASSEMBLY CAMAM MOD. SIPM TTS - CE (1999) - Hydraulic pump power HP 5.5 (kW 4.0) - Productivity 60-120 assambled chairs/hour - Dimensions mm 3500x1300x2200 H - Weight kg 2060 - CE rules - Year 1999  ... more information

SECOND-HAND CLAMP WITH FOLDING BENCHES COMEC MOD. SPL/3R - CE STANDARDS - Max tables inclination 30° - Max working dimensions 1350x780 mm - N. 3 hydraulic cylinders - Hydraulic unit 5.5 hp - CE rules - Year 1995 -Volt. 380/50 - S/W 950304  ... more information

SECOND-HAND SANDING MACHINE FOR TURNED PIECES LOCATELLI MOD. ORIENTAL MATIK 1200 - With automatic loader - No. 2 abrasive belts -Brushes - No. 6 spindles - Working length 1200 mm  ... more information

SECOND-HAND OLEO PNEUMATIC LATHE FOR TURNING AND SANDING OF SMALL WOODEN ELEMENTS LOCATELLI MOD. OMK 300 - control panel - automatic loader - Maximum working length 300 mm - min / max working diameter 8/80 mm - working stations: automatic loader turning with n. 2 gouges (roughing + finishing) 1° shaped knife 2° shaped knife unloading

SECOND-HAND COPYING LATHE WITH 4 SPINDLES BACCI AND SANDING UNIT TYPE T4MO 250 - spindles center distance 250 mm. - max. working lenght 1250 mm. - knives diam. 35 mm. - milling motor 11 Kw - longitudinal sanding unit - year 1999 - CE RULES  ... more information