other machines for plastic used for sale

STRATASYS OBJET30 PRIME V3 3D PRINTING (year 2015) 3D printing of medical implements that require prolonged contact with the skin, such as headsets or surgical guides. Prototypes of joints, connections and sealants. The Objet30 Prime printer offers 12 different materials so you can create accurate prototypes of consumer products with smooth surfaces and flexible components from your desktop. Printing time: 1102 Specifications: layer thickness 28 microns for Tango materials; 16 microns for all other materials Precision 0.1 mm could vary depending on part geometry, size, orientation, material, and post-processing method model materials Biocompatible (MED610) Material for high temperature (RGD525) Rigid and opaque white material (VeroWhitePlus) Rigid and opaque blue material (VeroBlue) Rigid and opaque black material (VeroBlack) Rigid and opaque gray material (VeroGray) ...

rotorwidth: 300mm rotorØ: 450mm feed hopper: 250mm x 280mm rotor knives: 9 bed knives: 2; ready for operation  ... more information

Year: 2003 - technically efficient, ready to work – after full service - minimum welding dimension: 370 mm - maximum welding dimension: 2500 mm - profile supports  ... more information

Base Machine is a OMSO DM44N 2-Lane Lid Machine, age 2004, L- Format in feed conveyor for feeding Vertical Lid Stacks, acts as an accumulator as well Auto feeding of Lid Stacks to the 2 x Universal Screw Denesters with suction Nipples Infeed conveyor with Vacuum to keep Lids in proper position Each Lane with PAGOmat 6HS Pressure Sensitive Label dispensers, with PLC Controls, manufactured by PAGOmat/ Fuji Seal, Switzerland Outfeed Conveyor to 2-Lane Lid Stacker 2-Lane Stacker, each Lane with 2 x Universal Helical Screws Main Drive with a variable frequency, AC-Synchronous Motor with a brake, with Microprocessor Controls Max. dia. of round Lids: Ø125 mm Max. dimensions of Rectangular & Oval Lids: 125 x 150 mm Max. height of Lids: 25 mm Speed with Oval Lids dimensions 120 x 130 mm: Single Lane 110 Lids/ min, Dual Lane 220 Lids/ min 400 V, 3 phase, 50 Hz

Plate press - table press - Laboratory Press - Universal Press MHSP522 Press area 230 230 mm Clear width 200 mm Manual drive with worm gear screw jacks 5 KN Pressure 5 KN (0.5 tons) Weight 55 kg Per sensor revolution 0.5 mm path, this little manual force with great force, very fine deliverable. Pressing force is long maintained by self-locking.

Frequency-controlled heating laboratory press with force measuring device -Pressure 20 KN / 2 tons -Pressing area 220 220 mm -Maximum pressing force at 220 220 mm: 41 N / cm² -Hot press with moveable lower pressing plate, electric drive with gear reduction, force measurement is carried out by means of strain gauge sensor -Heat output approx. 1 KW -Plate temperature 120 ° C -Dwell time / duration of laminating: 1-10 s -Pneumatic connection 6bar required -Power supply 400 V, 16 A -Sliding table with integrated positioning pins, lower pressing plate, pneumatic drive -Pressing panels with switchable integrated vacuum channel -Electrical control system integrated with PLC control display in the front panel of the machine -Side channel pump to generate the vacuum

Data sheet heating press Oropress Pneumatic press 5 KN / 0.5 tons Press stroke 50 mm Adjustment of the clear height with handwheel and spindle, adjustable from 100 to 220 mm. With top heating plate 120 x 100 mm and temperature control, temperature up to 250 °C. Pneumatic two-hand control with triggering via Festo ZSB. Pneumatic sliding table 180 x 220 mm for loading outside the machine. Machine dimensions W = 1100 mm, L = 700 mm, H = 1850 mm Machine weight approx. 300 kg Movable on castors On request for an extra charge with second heating plate and temperature control at the bottom.

Laboratory Press EHSP125 - Demonstration Machine Table press / electric spindle press with pressing pressure 20 KN (2 tons). Press drive with screw jack, reduction ratio 1 : 12, spindle diameter 32 mm, pitch 6 mm, pressing surface approx. 100 100 mm, clear height and stroke approx. 300 mm. Gear motor 0.37 KW, 1,390 rpm, 4-pole, with spur gear i = 1 : 5, Speed 150 mm / min. Max dynamic load 20 kN. With reversible control, emergency stop and motor protection plug. Sturdy steel press frame. Base table made of high-quality aluminum profiles 4545 mm, table surface 600 600 mm, table top made of multiplex top. Total weight approx. 100 kg. The table press has 20 kN pressing pressure (dynamic load). Typical applications are pressing work with exact delivery. Suitable for pressing bonding, embossing and impressions. The screw jack has a twist protection so that the p ...

Electric spindle press REITZ EHSP100F as laboratory heating press / demonstration machine Laboratory heating press with pressing pressure 40 KN (4 tons), ratio 1 : 16, spindle diameter 45 mm, pitch 8 mm, spindle stroke 0.5 mm per revolution. Gear motor 0.75 KW, 1,500 rpm, 4-pole, with spur gear i = 1:5, Speed 150 mm / min. Max dynamic load 25 kN. With reversible control, emergency stop and motor protection plug. Total weight approx. 100 kg, table surface 600 600 mm, pressing surface approx. 150 250 mm, clear height approx. 60 mm. Base made of high-quality aluminium profiles 4545 mm, the table top is made of glued plywood top. The laboratory heating press has 40 kN pressing pressure (dynamic load). The spindle is self-locking and thus maintains the pressing force for a longer period of time. For an extra charge with heating plate, insulating plate and temperatur ...

Used pneumatic press 4 KN -Pressing force 4 KN (0.4 to) -Pneumatic cylinder make Festo -Pneumatic two-hand control - press plate made in 4 Guide pillars -Work surface between guide columns 200 220 mm -Machine table made of aluminium profiles and PA plate 600 600 60 mm -3-sided walls from Plexiglas -Total weight approx. 70 kg Suitable for stamping or embossing tools or plate bonding.

Semi-automatic drilling device for plastic parts This purely pneumatic drilling device is designed for repeatable drilling of small plastic parts up to approx. 40 x 200 x 40 mm with holes up to 3 mm. Specifications: - Linear axis travel 420 mm - Stroke approx. 30 mm - Height adjustment approx. 100 mm - With 2-hand release - Plexiglass protection on 3 sides - Emergency stop switch - Sturdy, mobile frame made of aluminium profiles - With 4 swivel castors, 2 of them with brakes - Overall dimensions approx. 1000 x 1000 x 1700 mm - Weight approx. 50 kg - With collet for drill bit 1.5 mm Expiration: - Setup: Adjust stop angle to part size - Setup: Alignment of cross table in X and Y - Setup: Set height adjustment to part height - Inserting the part - Triggering via 2-hand button and holding until drilling is completed - Removal of the finished part and placement  ...

Electric surface press REITZ EHSP522 Pressing surface 200200mm Pressure 5 KN / 0.5 tons Suitable for surface bonding of plastics and composites. On request with: - Heating plate and temperature control - Load cells and gauges for use as test press  ... more information

Fully automatic hot stamping press Oropress Mechanical eccentric press with lift table Lift table as pneumatic sliding table 250 x 250 mm Fully automatic sequence, optionally triggered with foot switch for single stroke Heated press punch 120 x 200 mm up to 250 °C Safety grille Film Feed Unit Built in 1986

URBAN Welding Cleaning Line Complete line, currently set to Rehau Urban AKS 6110/4-35/25 - Right stop - Year of construction 2001 - Welding dimension 3500 x 2500 - U-welding - C-welding Urban Cooling Belt 20/35 Urban SV 610 with turning station WT 660 - Flow direction right-left - Year of construction 2001 - with profile recognition -Tools: - ISBU - Radius gauge - 2 different groove knives at the bottom and top - Piercing knife for backstabbing wings - Various inner folding knives - Disc milling cutters - Drill groove cutters

For Wood, Plastic, Kitchens, Windows, Doors, Loading Furniture, construction, etc VAT not deductible.  ... more information

Stock number U1984-2 Used impact dryer for pellet by RIETER (Germany) model AERO 500 in stainless steel design (material 1.4541, AISI 321). Dryer is equipped with air blower providing 90 m3/min and driven by electric motor with power 18.5 kW. Dryer has reported output 4000 kg/h of outgoing product. Flow rate of water with pellet: 35 m3/h (maximal), 25 m3/h (nominal) and 20 m3/h (minimal). Nowadays machine has installed screens with mesh 1.2 mm. Machine new 1997. Shipping dimensions of dryer: width 1400 mm x length 3830 mm x height 2265 mm. Weight of machine – 700 kg. Body of drying chamber is sound-muffled. Technical documentation included in german language. Machine had been working on PP pellet.

Keyence Agilista 3200W High Resolution Industrial 3D Printer Material Jetting AR-M2 AR-G1L AR-G1H Type: Agilista - 3200W manufacturer: Keyence Corporation, Japan Date of purchase according to invoice: 18.05.2017 Operating time: 40,985 h Printing time: 1,907 h Specifications: - Printing material: AR-M2 (transparent printing material), AR-H1 (heat-resistant printing material), AR-G1L (Silicone Rubber [Low Hardness]), AR-G1H (Silicone Rubber [High Hardness]) - Support material: AR-S1 (water-soluble support material) - Build volume: 297 × 210 × 200 mm (DIN A4 size × 200 mm) - Resolution: 635 × 400 dpi - Layer thickness: High resolution AR-M2: 15 μm, normal Resolution AR-M2: 20μm, AR-H1: 20μm, AR-G1L/H: 30μm - Interface: Ethernet 10BASE-T / 100BASE-TX - Operation: colored touch panel - Dimensions: 95 x 70 x 136 cm - Weight 188 kg

- 5 aluminium silos with attachment filter incl. discharge screw with slide made of V2A - 4 aluminium silos for manual filling with discharge screws - 3 dosing scales - Optional with dust filter  ... more information

Stratasys FORTUS 900mc 3D printer YOM 2015, USA Computer Numerical Control (CNC)- Brand: Touchworks Technology: Fused Filament Fabrication (FFF) Materials: Thermoplastics. Polymers/Thermoplastics: PLA, Polyesters, Polyamides, Polycarbonates, Styrenes: ABS, ASA, Polysulfones, Polyaryletherketone, Polyimides Two vials for main material 1508 cc Two vials for fixing material 1508 cc Automatic switching from one vial to another Feedstock format: Filament 95% rate of yield Total Installed Capacity: 7,5 kW Working volume (XYZ): 914.4 x 609.6 x 914.4 mm Details up to 200 kg Build volume 508.756164 L Min. layer thickness 0.51 mm X/Y accuracy: +/- .089 mm or +/- .0015 mm per mm, whichever is greater. Z part accuracy includes an additional tolerance of -0.000/+ slice height. Note: accuracy is geometry-dependent. The vacuum board is adapted for use with two sizes of construction s ...

Slitter rewinder for foil, paper, foiling and laminates. 7 my -200 my Max. material width = 1250 mm Speed max. mech = 350 m/min, Rewinder max. = 600 mm Min. working width = 25 mm, sleeve 76 mm, Max. working width = 1250 mm, sleeve 76 mm,, Unwinder (shaftless) diameter max. = 1000 mm Sleeve = 70-76/ 150 -152 mm, Cutting system = paper cutting, Side edge control , 16 knives included,