post press: cutters and guillotines used for sale

Board cutter - board shear Make Schimanek Model 10-110 Year 1980's Cutting length 110 cm Details Iron cast table 72 cm, front lay+small cut device, back lay  ... more information

Board cutter - board shear Make Robust Model 1400 Year 1980's Cutting length 140 cm Details Iron cast table 100 cm, front lay+small cut device, back lay Available Direct  ... more information

Three knife trimmer Make Challenge Model CMT-330-B Year 2010 Serial 10040217 Min untrimmed size 178 x 127 mm Min trimmed size 148 x 100 mm Max untrimmed size 330 x 330 mm ( Max trimmed size 307 x 328 mm Stack height 51 mm Min trim 2.5 mm Max trim 152 mm Speed up to 400 cycles per hour in single stream mode and 700 in Multi stream mode Memory up to 99 set-ups Change over time Fully automatic within 6 seconds Details 56416 manual in-feed conveyor + 58000 vertical stacker Available direct

Guillotine Ideal Model 4810A Year 1989 Cutting length 475 mm Details Manual adjustable clamp Electric cutting Manual backgauge adjustment Ruler read/out 2 new knives, 1 used single phase, 240 volts  ... more information

Size 46 cm Function filmcutter with light table and rotatary cutting wheel  ... more information

Three knife trimmer Make Challenge Model CMT-130B Year 2013 Serial 13040569 Min untrimmed size 171 x 178 mm Max untrimmed size 330 x 241 mm Stack height 51 mm Speed up to 200 cycles per hour in single stream mode or up to 500 books in multi stream mode Change over time Fully automatic within 10 seconds Details 58500B book pile feeder + 58000 vertical stacker Available direct

Three knife trimmer - in-line Make Challenge Model CMT-330 Year 2005 Serial 05010048 Min untrimmed size 178 x 127 mm Min trimmed size 148 x 100 mm Max untrimmed size 330 x 330 mm Max trimmed size 307 x 328 mm Stack height 51 mm Min trim 2.5 mm Max trim 152 mm Speed up to 400 cycles per hour in single stream mode Memory up to 99 set-ups Change over time Fully automatic within 20 seconds Details 56600 Tilt in-feed conveyor + 56421 cooling down elevator + 56420 exit conveyor, this machine can be used in-line with a perfect binder Available direct

Polar Mohr stacking lift L-1000-W-6 => refurbished for ergonomic working at user-friendly working heights Specifications Tub size 1400 x 1000 mm Stroke max. 910 mm Load capacity max. 1000 kg The automatic lifting of the material to be cut makes it possible to the operator at an ergonomically favourable working height for him the material into the vibrator or directly into the cutting machine shop. However, the stacking lift can also be used for stacking material to be sliced. The lowering takes place semi-automatic. This means that the process will be manually started and passed through the light barrier automatically stopped. POLAR stacking lifts do not have to be can be anchored to the ground and can therefore be easily be converted. Customer: - The productivity of the cutting machine increases by up to 10%, as the working height during loading/unloading r ...

Description: -> built in 1999 -> medium format up to 75 x 105 cm -> with protective enclosure / security fence This transomat was used for unloading a high-speed cutter - standing on the right. The Polar Transomat uses split and undivided layers automatically onto pallets, while at the same time is cut further. As a result, production costs, depending on the cutting program, by 25 -70%. Thanks to the patented, movable pallet tip, the Polar Transomat has a particularly high edge accuracy. Increased productivity: stacking at the same time as cutting Improvement of quality: Particularly edge-accurate stacks can be created directly and faster Process.

Standard machine - without program OMA Optical Measure Display (glass ruler) Air Table, Side Tables (1) - Cast Iron Electrical fault Machine is given away against packaging and loading costs Machine can be used as spare parts carrier or for repair. Due to high labour costs, a repair is not worthwhile in Germany.

Description -> Year of manufacture 2007 -> medium format up to 75 x 105 cm, pile height 130 cm -> with protective housing / safety fence This Transomat was used for unloading a high-speed cutter ,standing on the right. The Polar Transomat automatically places split and unsplit layers on pallets while simultaneously continuing to cut - reducing production costs by 25-70% depending on the cutting programme. Thanks to the patented, movable pallet tip, the Polar Transomat achieves a particularly high level of edge accuracy. Increase in productivity: destacking simultaneously with cutting Improved quality: stacks with particularly accurate edges can be further processed directly and faster.

machine has been completely refurbished machine newly painted ES-Electronic computer cutting programmes monitor display integrated in machine frame - monocolor 120x70mm Infra-Red light guards two hand safety cutting back table guarding optical cutting line indication cutting table - stainless steel slot cover at back table side table RH+LH - resopal - air 750 x 750mm 2 knives, documention, el. diagrams, tooling 3Ph - 400 V - 4.2 A- 50 cycles

Maschine wurde instandgesetzt X-Modell-Elektronik voll graphikfähiges Farb-Display Touch Screen Infra-Rot Lichtschranke Gleichzeitigkeitssteuerung Hintertischschutz optischer Schnittandeuter Lufttisch - rostfrei Schlitzabdeckung am Hintertisch Seitentische (2) - Gußeisen Neigesattel stufenlose hydraulische Pressung 2 Messer, Bücher, Schaltpläne, Masch.Werkzeug V400 - A10 - Hz/Cycl.50 - Phs3

Guillotine Make Horizon Model APC-M61 Year 1990 Cuttinglenght 610 mm Details Hydraulic cutting Hydraulic clamp Digital readout + programming Available direct  ... more information

Cutting line Polar 176 XT-AT-Pace, year 2010 (cutting width 1760 mm / 69.29") The machine is in a good working condition, only 1.6 mio. Cuts PACE stands for POLAR Automation for Cutting Efficiency, whereby the loading, turning and waste disposal processes are automated. The Autoturn turning gripper in conjunction with the Autotrim high-speed cutter makes it possible to automate the first five cuts (all-round with separating cut). Equipment: Polar Autotrim 176 XT-AT, Autotrans M Format 7S, Autoturn, lowerable ruler left and right, rotating saddle, Compucut and P-Net possible, ErgoFront tables, various air tables and protective grids, etc. Available: immediately Suitable accessories are available immediately and can be purchased as an option: Transomat loader3 BL 160-7S incl. chip marker and counter ruler, year 2010 Transomat unloader ER 160-6, year 2010  ...

Polar 76 EM, Year 1985 Display Program Airtable left Table right Etc. Available: at short term  ... more information

Very nice cutting machine. With refined tables. Air table center, steel side tables, programs.  ... more information

M. No.: 3/60 388 Format (cm): 80 Equipment / Additional information: 1xreserve knife Condition: Very good condition / New controller  ... more information

Duplo PFi Blade B2+ Year of construction: 2021/2022 Digital cutting table - perfect solution for flatbed cutting, creasing or perforating and drawing. Ideal for digital printing and smaller offset print runs. -Technical data and further information see Appendix - Condition like NEW At call!  ... more information

M. No.: 6251389 Format (cm): 58 Equipment / Additional information: 1xreserve knife  ... more information