trabalho de chapa metálica usadas para venda (3,333)

sheet width: 1070 mmplate thickness: 9.0 / 10,0 mmdistance between columns: 1070 mmdiameter of upper rolls: 190 mmpre-bending capacity: 9,0 mmconnected load: 5,3 kWweight of the machine ca.: 2,4 tdimensions of the machine ca.: 2,7 x 0,92 x 1,2 mm- Electrically adjustable rear roller- Electrically adjustable lower roll (material clamping)- Digital readout for rear roller movement- Digital readout for lower roll movement (material clamping)- Hardened rolls- Conical rolling- Swiveling top roll- Brake motor- Emergency stop- Documentation- 400VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 35.0 tchamfer lenght: 1250 mmdistance between columns: 1095 mmstroke - stepless adjustable: 215 mmcolumn arm: 410 mmtable height: 800 mmdayligth: 455 mmworking feed: 10.0 mm/secreturn speed: 56.0 mm/secwork height max.: ca. 875 mmControl: DM 51 Number of working hours: ~ 13.300 hoil volume: 80.0 loperating pressure: max. 240 barvoltage: 380 Vtotal power requirement: 4.0 kWweight: 2500 kgrange L-W-H: 1700 x 1450 x 2250 mmFeatures:- Robust CNC-controlled hydraulic press brake- With DELEM CNC control unit DM 51” Positioning of the backgauge (X axis) Positioning of the depth adjustment (Y1+Y2 axis) Program + tool storage possible Swiveling control panel, front left- CNC electric motor-driven backgauge (X axis)- CNC electric motor-driven height adjustment of the stop (R axis)- 2x manually adjustable stop fingers- 1x split set of deer foot tools - top- 1x split set of Multi V tools ...

material width: 1250 mmmaterial thickness: 12,00 mmno. of straightening rolls: 19 sheet thickness - min.: 0,50 mmdiam. of the rolls ca.: 50 mmsheet length min.: 100 mmwork height max.: 900 mmspeed ca.: 2 - 20 m/min.total power requirement: 31 kWweight of the machine ca.: 16,50 tdimensions of the machine ca.: mThe straightening machine HÄMMERLE is suitable for the precision alignment of parts.The hydraulically controlled guard locking also allows good judging resultscomplex geometry.Infeed and outlet roller table inclusiveDimensions (L / W / H, approx.)Rectifying unit / frame 2300 x 3200 x 1800 mmHydraulic 1600 x 900 x 1800 mmSwitch cabinet 600 x 400 x 1900 mmTank capacity 400 lOil filling by the customerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 2.5 mmthroat: 260 mmdistance between roll centers: 92.0 mmweight: 295 kgrange L-W-H: 1200 x 700 x 1200 mmEquipment:- robust beading machine with motor-driven rollers- Lower shaft with adjustable stop- for the economical production of a wide variety of bead types- high accuracy thanks to precision-mounted shafts- Clearly arranged switching elements- Base frame equipped with storage compartment- powerful drive motor, even under continuous load- mobile foot switch for clockwise and counterclockwise rotationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 300 kNstroke length max.: 235 mm: 200x24 mmbending capacity max. - round: 60x4,0 mmtoolpiece height max.: 250 mm: 660x1250 mmwork height max.: 900 mmreturn speed: 20 mm/secworking feed: 10 mm/sectotal power requirement: 3 kWweight: 950 kgDomestic equipments:- semi-automatic NC control (99 programs with 16 steps each)- incl. bending bolt (without punch)- Incl. tool holder for dies- incl. foot pedalEquipment:- Stamp, smallest U = 145 mm 85 °   H = 250 mm, R = 5 mm- Quick change Monomatrize 85 °   H = 250 mm, V = 63 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mmplate thickness: 13.0 mmthickness at Niro-steel: 8.0 mmwork height max.: 930 mmno. of strokes: 9 - 17 Hub/mincutting angle: 0.5 - 3.0 °down holder: 18 StückControl: SC 100 T engine output: 22.0 kWweight of the machine ca.: 9500 kgrange L-W-H: 4270 x 2200 x 2250 mm Good/well-maintained condition () Current new price approx. 80.000 eurosFeatures:- Electro-hydraulic/sliding table shear- HACO CNC control model SC 100 T” Preset positioning of the backgauge Digital display of actual position Electro-hydraulic cutting angle adjustment Electro-hydraulic cutting gap adjustment LCD display Emergency stop switch- NC electro-motorized backgauge, on ball screws- Hydraulically operated hold-down device- Front finger guard- Ball rollers in the support table Support table with recessed handles- 1x side stop, with mm scale- 1x front support arms- 1x freely movable foot switch- Rea ...

roll diameter: 162 mm: 50 mmShaft revolutions: 8,5 U/minpressure hydraulic cylinder: 100 kNtotal power requirement: 1,5 kWweight of the machine ca.: 450 kgdimensions: 1100 x 800 x 1500 mmDomestic equipments:- Direct drive of all three shafts- Single delivery of the side rollers- Horizontally and vertically usable- Hydraulically movable side rectifier (via control panel)- 2 digital displays for the feed rollers- Hardened rollers- Mobile control panelThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mmplate thickness: 16 mmdistance between columns: 3050 mm: 15-1000 mmcutting angle adjustment: ja °cutting gap adjustment: ja mmconnected load: 30 kWweight of the machine ca.: 14,.5 tdimensions of the machine ca.: 4,0 x 260 x 2,55 mHydraulic guillotine shear with- ELGO control for backgauge- Cutting angle adjustment- Cutting length adjustment- Cutting length limitation (time dependent)- Sheet thickness adjustment- Back gauge with clearance function- Cutting line lighting- Side stop- 3 pcs. support consoles- good conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tchamfer lenght: 4100 mmdistance between columns: 3700 mmcolumn arm: 415 mmstroke: max. 215 mmdayligth: 410 mmajustment speed: 200 mm/secworking feed: 10.0 mm/secreturn speed: 150 mm/secwork height max.: 1080 mmtable width: 100 mmControl: CYBELEC oil volume: 160 ltr.voltage: 400 Vpower capacity: 8.5 kWweight: 10200 kgrange L-W-H: 4800 x 1800 x 2600 mmEquipment:- BEYELER electro-hydraulic CNC press brake- CNC CYBELEC control unit DNC 1200 PS/B” High-resolution screen Clear, concise menus in the operators language Tool and product library Swiveling control panel, front right- CNC-controlled axes (Y1+Y2-X)- CNC-controlled backgauge adjustment (X-axis) 2x manually adjustable stop fingers - Manual upper tool clamping- Manual lower tool clamping- Rear safety device (safety door)- Side safety device (safety doors)- Bending tools 1x set of split upper tools (ROLLERI TOP 175.26.R0 ...

pressure: tplate thickness: 5 mmsheet width: 40 mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: - mmthroat: - mmdistance between roll centers: - total power requirement: - kWweight of the machine ca.: 160 kgdimensions of the machine ca.: - mNo accessories For rolling beadsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 2000 mmsheet thickness - max.: 10 mmsheet thickness - min.: 3 mmnumber of straightening: 13 Rollersstraightening roll diameter: 145 mmstraightening feed: 16 m/minbale length: 2330 mmdistance b/n rollers centers: 150 mmdiameter of bottom rollers: 290 mmmain drive motor: 30 kWweight: 32 t- number of bottom rollers: 21/24- Number of supports (top/bottom): 3 /3- speedof adjustm. of traverse: 0,71 mm / sec- way oftraverse: -18 mm to +42 mm- max. swivellower traverse: 8 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working width: 50 mmworkpiece height: - mmwheel diameter: 250 mmgrinding wheel width: max. 40 mmturning speed range: 1500 + 3000 U/mintotal power requirement: 1,0 / 1,4 kWweight of the machine ca.: 100 tdimensions of the machine ca.: 0,65 x 0,45 x 1,15 mElectric 380 Volt: Deburring machine for deburring sheet metal or flat material, this machine is equipped with grinding wheels but can also be operated with brushes, 2-stage motor, base cabinet with rollers.Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1530 mmplate thickness: 4.0 mmthickness at Niro-steel: 2.0 mmno. of strokes: max. 34 Hub/mincutting angle: 2.70 Graddistance between columns: 1540 mmwork height max.: 920 mmvoltage: 400 VControl: konv. engine output: 3.2 kWweight of the machine ca.: 1115 kg.range L-W-H: 2275 x 2220 x 1400 mmFeatures:- Robust motorized swing-arm guillotine shear- Break-resistant, torsion-resistant welded steel construction- Compact and easy-to-use machine design- Manual backgauge, adjustable from the rear Stepless adjustment across the entire travel range- 1x hold-down bar- 1x freely movable foot switch- Front, extendable table extension- Rear safety device- Original operating instructions Optional accessories included:- Sheet metal holding device for thin sheet metal blanksThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 220 kNsheet thickness - max.: 6,4 mmtravel -x axis: 2500 mmtravel -y axis: 1270 mm: 90 m/min: 60 m/min: 108 m/min: 360 °/secpunch diameter: 76,2 mmworkpiece weight: 150 kg: 0,01 mm bzw. 0,01° : 15 Stücktool changing time: 1,5 - 6,5 secweight of the machine ca.: 11.050 kgdimensions: 6400 x 5800 x 2100 mmWorking hours: 30.430 hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: mmplate thickness: mmpre-bending: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 0220 mmcoil weight: 0,300 tcoil internal dia.: 270 - 500 mmcoil outside dia.: 900 mmband speed: 8 U/mintotal power requirement: 0,18 kWweight of the machine ca.: 0,115 tdimensions of the machine ca.: 0,90 x 0,90 x 1,25 mWith driveManual central spreaderMotor has only an on/off switchBrake mecanicalBand loop control via dancer roller in start/stop modeThe decoiler is runningThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1030 mmplate thickness: 12.0 mmthickness at Niro-steel: 8.0 mmblade length: 1050 mmcutting angle: 3.0 Gradno. of strokes: ca. 10 Hub/minback stop - adjustable: 500 mmControl: konv. table height: 900 mmoperating pressure: max. 280 baroil volume: 150 lengine output: 11.0 kWweight: 1900 kgrange L-W-H: 1550 x 1150 x 1600 mm Machine from a maintenance workshop (!)Furnishing:- heavy / robust electro-hydraulic sheet metal plate shears- Machine body in a closed design as an all-steel welded construction- Knife upper cheek slides in a long downward direction over the knife edge. protruding plastic guides- Cutting is done hydraulically via two hydraulic cylinders- The upper beam returns to its starting position in two ways. Spring batteries on the side stands- manual back gauge, adjustable from the rear Adjustment by handwheel, with mm scale- manual cutting gap adjustment- 1x side sto ...

Bending length: 4200 mmpre-bending: 34 mmBending strength: 38 mmpower capacity: kWNumber of rollers: 4 StkAdjustable rollers: Stkdiameter of upper rolls: 540 mmdiameter of lower rolls: 500 mmside roll diameter: 365 mmwork speed: 0 - 8 m/mintotal power requirement: 55 kWweight of the machine ca.: 35 tControl: Haeusler Bendtronic 2.0 dimensions of the machine ca.: 7.5 x 2.1 x 2.4 mEquipped with:- Haeusler BENDtronic 2.0 control system- Smallest possible bending diameter with upper roller Ø540mm: 595mm (depending onspringback)- Roller bearings: Self-adjusting roller bearings- Max. cylinder force against upper roller: 3,245kN- Roller material: 42CrMo4 (1.7225)- Speed compensation between upper and lower roller: automatic whenthe two-roller drive option is selected- Roller adjustment: hydraulic- Tilting of the lower roller and both side rollers for cone bending: infinitely variable from th ...

sheet width: 2500 mmplate thickness: 4 mmdistance between columns: . mmControl: rear stop: The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2500 mmplate thickness: 2 mmdistance between columns: . mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 3100 mmheight: 120 mmwidth: 120 mm Brand New Die Block List Price: 9.738 Euro Special Price on RequestV-Openings:- 80.0 mm / 85° / R 10.0 with guide rollers- 50.0 mm / 85° / R 5.0 with guide rollers- 35.0 mm / 85° / R 4.0- 22.0 mm / 85° / R 2.5- 2x Mounting Screws incl. Link ChainThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 tthroat: 175 mmwork height max.: 1055 mmstroke: 30 mmsheet thickness - max.: 8 mmtotal power requirement: 4 kWweight of the machine ca.: 1020 kgdimensions: 910 x 670 x 1930 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 50 tthroat: 610 mmtotal power requirement: 7,5 kWmachine weight ab.: 1700 kgdimensions: 1500 x 650 x 1700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 130 tchamfer lenght: 3060 mmdistance between columns: 2690 mmcolumn arm: 410 mmstroke: 215 mmdayligth: 385 mmajustment speed: 200 mm/secworking feed: 1-10 mm/secreturn speed: 135 mm/sectable width: 120 mmtable height: 1050 mmtiltable up to: +/- 10 mmNumber of working hours: 53.820 hcompressed air: 5.0 - 7.0 baroil volume: 250 loperating pressure: 340 barvoltage: 400 Vtotal power requirement: 16.0 KVAweight of the machine ca.: 11250 kgrange L-W-H: 3640 x 2210 x 2375 mm- in checked condition - machine video -https://www.youtube.com/watch?v=23IbxRaZ2KAEquipment:- CNC electro-hydraulic press brake- including DELEM CNC control model DA 65 swiveling control panel, front left 2D graphic programming & product display tool & program library including new TFT-LCD industrial monitor- CNC controlled axes: Y1 + Y2 / X / R- CNC electro-motor / controlled back stop (X axis)- CNC electro-motor ...

material width: 100 mmmaterial thickness: 15 mmno. of straightening rolls: 9 straightening feed: 7 m/mintotal power requirement: 0,75 kWweight of the machine ca.: 380 kgdimensions of the machine ca.: 710 x 920 x 1360 mmFeatures:- 5x driven lower rollers- 4x adjustable upper rollers- Max. cross-section approx. 800 mm²- Mobile use on casters- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 tchamfer lenght: 3600 mmdistance between columns: 2650 mmdayligth: 500 mmthroat: 300 mmstroke: 250 mmworking feed: 10,5 mm/secreturn speed: 100 mm/secram stroke speed: 150 mm/sectable height: 900 mmoil volume: 500 ltotal power requirement: 37 kWweight of the machine ca.: 17800 kgdimensions of the machine ca.: 3710 x 1800 x 3390 mmEquipment:- Controlled axes Y1 + Y2- Manual X-axis with digital position display- Set of upper and lower tools- 2x stop fingers- 2x front support arms- Hand and foot controls- Side + rear safety guard- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 110 tchamfer lenght: 4100 mmdistance between columns: 3100 mmdayligth: 425 mmthroat: 300 mmstroke: 225 mmworking feed: 10 mm/secreturn speed: 100 mm/sectable height: 900 mmoil volume: 260 ltotal power requirement: 11 kWweight of the machine ca.: 12000 kgdimensions of the machine ca.: 4400 x 1750 x 2500 mmEquipment:- Cybelec DNC 34 PC control system- Controlled backgauge 700 mm (X-axis)- Hydraulic tool clamping at the top- 2 support arms with sliding system- Upper tool- Lower tool- Side + rear safety device- 2 manual foot switchesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 8900x3700x2500 mmWeight: 8300 kgTotal power requirement: 11 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.