trabalho de chapa metálica usadas para venda (3,333)

plate thickness: 4 mmcutting angle adjustment: 30-120 °table height: 900 mm: 407 weight of the machine ca.: 760 kgdimensions of the machine ca.: 1300x1000x1150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2000 mmplate thickness: 1,5 mmdistance between columns: mmtotal power requirement: kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2000 mmplate thickness: 1,5 mmtotal power requirement: kWweight of the machine ca.: kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mmplate thickness: 6 mmweight: 7.000 kgrange L-W-H: 3450x2200x1750 mmEquipment/accessories:- adjustable support table- Sheet support- angle stop- Sheet support arms- foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 4200 mmplate thickness: 14 mmpre-bending: 10 mmroll diam. toproll: 340 mmroll diam. bottom roll: 310 mmspeed: - m/minControl: Davi CNC total power requirement: - kWweight of the machine ca.: 11 tdimensions of the machine ca.: 6,5 x 1,75 x 1,65 m- DAVI CNC control- pre-Bending- Hydraulic 4-roller drive- Side roll diameter: 230 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tchamfer lenght: 3100 mmdistance between columns: 2550 mmcolumn arm: 400 mmtable height: 925 mmstroke: 200 mmcontrol: Cybelec DNC 8805 output: 11 kwtotal connected load: 15 kWweight of the machine ca.: 9,0 trange L-W-H: 5,2 x 2,1 x 2,9 mUsed CNC- press brake- some upper tooling (no lover tooling)- Infrared security device- documentation- hydraulic Crowning- 2 axis backgauge X + RThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 6.0 mmthickness at Niro-steel: 4.0 mmdistance between columns: 3120 mmdown holder: 14 Stückcutting angle: 1°5 no. of strokes: 14 Hub/mincontrol: ENC 100 table width: 500 mmwork height max.: 880 mmoil volume: 170 ltr.total power requirement: 11.0 KWweight: 5550 kgrange L-W-H: 3750 x 1950 x 1650 mm Machine was used for ALU processing no heavy sheet metal processing good condition (!) new price ~ 32.000 Euro----------------------------------------------------Swing cut guillotine shear with fixed cutting angle with DURMA ENC 100 NC control unit manual cutting gap adjustment from the front----------------------------------------------------Equipment:- electro-hydraulic guillotine shears swing cut- with DURMA ENC 100 NC control unit Backgauge preselection - X axis Number of pieces (in automatic mode) Control panel, front left Retraction from backgauge on/ ...

x-travel: 4216,0 mmy-travel: 2007,0 mmz-travel: 305,0 mmcontrol: CNC table-size: 4902,0 x 2134,0 mmmax. workpiece weight: 1465 kg / m²machine weight ab.: 2500 kgtotal power requirement: 30 kWdimensions of the machine ca.: 5486,0 x 3708,0 mmThe compact waterjet cutting system in bridge design consists of a torsion-resistanttorsion-resistant steel construction, which is coated with a special durable anti-corrosion coating.coating. Both the two X-axes and the particularly high Y-axis are based on theY-axis are based on the maintenance-free design specially developed by OMAX for the special requirements of a waterjet cutting system.specially developed by OMAX for the special requirements of a waterjet cutting system.Equipment: - Motorized Z-axis - Water level control - Abrasive system with AFS 1000 abrasive conveyor system - High-pressure system with special stainless steel high-pressure pi ...

sheet width: 3040 mmplate thickness: 4 mmdistance between columns: 3040 mmstroke of upper beam: 200 mmadjustment of lower and bend clamping: 100 mmtotal power requirement: 6,4/3 kWweight of the machine ca.: 6,3 tdimensions of the machine ca.: 4,3 x 1,2 x 1,8 mCondition: ready for operation: Electric 380 Volt: Control panel: Winkelvorwahl Holder for divided upper tools: Upper tool divided: 3040 x 120 mmHnad control: Sheet metal shelf behind: Folding blade: Flat rail for folding beam: Motorized folding machine with double-sided bending beam drive, lower, upper and bending beam adjustable, drive motors as brake motors - slip clutches as overload protection, bending angle adjustment via potentiometer, individual switching for each work step by hand switch, SEGMENTED TOPRAIL 120 mm height (Photo 7).Please notice that such a machine now costs about €70.000,--.As usual, the sheet thick ...

: 2100 mm: 7 mm: 6 mmroll diameter: 190 mmmin. dia.: 285 mm: 4 kW: 3200 kg: 4000x1350x1500 mmEquipment:- motorized rear roller adjustment- Digital display- Automatic conical bending. - Foot switch- Safety devicesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 42.0 x 3.0 STAHL mmtube diameter: 30.0 x 2.0 EDELST mmbending angle max.: 180 °bending radius max.: 100 mmbending speed: 2.0 U/min.Control: NC voltage: 400 Vtotal power requirement: 0.55 kWweight of the machine ca.: 115 kg Current new price approx. 4.200 Euro Very good condition / with machine baseDescription:- NC electro-motor tube bending machine - mandrelless up to 50 programs can be stored- Automatically returns to the starting position- Maximum bending capacity for 42 x 3.0 mm steel tubes- Excellent bending quality with very tight bending radii (from 2x tube diameter). and bending angles between 0° and 180°- Easy operation- High accuracy and reliability- Quick tool change (within seconds)- Easy to transport- Includes machine baseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 60.3 x 4.5 mm STtube diameter: 60.3 x 5.4 mm ALUtube diameter: 2 x 3.91 mm GASbar material - diameter: 35.0 mmrevolutions per minute: 2.0 U/minbending radius min.: 10.0 mmbending radius max.: 270 mmexternal diameter: min. 5.0 mmexternal diameter: min. 1/8 Zollvoltage: 230 Vtotal power requirement: 1.5 kWweight: 76.0 kgrange L-W-H: 302 x 243 x 674 mmEquipment:- mandrel-less tube bending machine- Model M = ELECTRO-HYDRAULIC SINGLE-PHASE- high performance and compact design- completely hydraulic machine- bends 210° without the need to catch up- no electronic control- Ercolina patent n. 102017000142179- control of the bending angle via adjustable angle scale- mobile machine base BENDING SEGMENT AVAILABLE AT AN EXTRA CHARGE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

chamfer lenght: 0900 mmplate thickness: mmdistance between columns: 900 mmpressure: 20 tcolumn arm: 230 mmstroke length max.: 150 mmtravel -x axis: 350 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mmplate thickness: 10 mmcutting angle: 0,5-3 °Number of hold downs: 18 Stückno. of strokes: 22/7 Hub/minwork height max.: 900 mmtotal power requirement: 20 kWweight of the machine ca.: 8.500 kgdimensions of the machine ca.: 3800 x 2100 x 2100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1270 mmplate thickness: max. 4,5 mm: 4 mmroll diameter: 120 mmroll speed: 8 U/minmin. bending diameter: 180 mmtotal power requirement: 2,2 kWweight of the machine ca.: 1250 kgdimensions: 2470 x 750 x 1000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 6.0 mm STpre-bending: 4.0 mm STdiameter of upper rolls: 200 mmside roll diameter: 165 mmdiameter of lower rolls: 190 mmbending speed: ca. 5.0 m/minControl: DIGI oil volume: 80.0 Litervoltage: 380 Vtotal power requirement: 6.0 kWweight: 6000 kgrange L-W-H: 5250 x 1500 x 1400 mm very good condition () Current new price approx. 80,000 euros Special price on requestFeatures:- Robust electro-hydraulic 4-roll bending machine 4-roll concept offers a wide range of bending and rounding options- MG swivel control panel Operation - control of all rolls and machine axes Digital position display Manual operation via joysticks- Two central rolls are driven directly by hydraulic motors- Conical rolling possible via inclined position of the rolls- Parallelism of the side rollers via torsion shafts- Bending on both sides- Diameters of up to 1.1 times the upper roller ...

table length: 3048 mmtable width: 1524 mmburner heads: 1 stroke: 270 mmspeed: 100 m/mindimensions: 8900 x 2260 x 2220 mmweight of the machine ca.: 7.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working pressure: 300 bartotal power requirement: / kWweight of the machine ca.: 1 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: - tstroke: - mmtable-size: - mmtotal power requirement: - kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: - m: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 13.0 mmthickness at Niro-steel: 8.0 mmdown holder: 14 Stückno. of strokes: max. 11 Hub/mincutting angle: 1°15 work height max.: 770 mmcolumn arm: ? mmoil volume: 300 ltr.control: konv. total power requirement: 15.0 kWweight: 11800 kgrange L-W-H: 4255 x 2250 x 2400 mmFeatures:- Robust electro-hydraulic swing pruning shears- Operation, swivels to the front left- Electro-motorized backgauge on recirculating ball screws Movement by push-button (forwards backwards) including ELGO digital position indicator- Manual quick cutting gap adjustment by eccentric (right side stand)- Machine stand with overhang- 1x long side stop, with mm scale- 2x front support arms, with mm scale- Ball rollers in the front support table- Hinged front finger guard- 1x free-moving foot switch- Rear safety device (protective grille)- 2x front emergency stop button- Operating instr ...

pressure: 135 tchamfer lenght: 3050 mmdistance between columns: 2550 mmdayligth: 320 - 560 mmstroke: 240 mmworking feed: 10.0 mm/secreturn speed: 150 mm/seccolumn arm: 400 mmwork height max.: 1050 mmcontrol: DNC 1200 PS/B operating pressure: max. 297 barcompressed air: 4.5 - 6.0 barconnected load: 15.0 kWoil volume: 250 ltr.weight: 11500 kgrange L-W-H: 5240 x 2400 x 2900 mm good/well-Maintained conditions used in Aluminum processing- in checked conditions - machine Video -https://www.youtube.com/watch?v=z-Bxibk_8uEFeatures:- CNC Electro-Hydraulic Press Brake- CYBELEC CNC Control Model DNC 1200 PS/B Swiveling Control Panel, Front Right Numerical Programming Tool & Program Library- CNC Controlled Axes: Y1 + Y2 + X + R + CNC Crowning- CNC Electro-Motorized Backgauge (X-Axis) with 3x Manually Adjustable Backgauge Fingers (Z-Axis) Maximum Travel Speed: 250 mm/sec- CNC electro-motorized height ...

table length: 4000 mmtable width: 2000 mmburner heads: 1 laser capacity in Watt: 4 kWCapacity steel: mmControl: MicroStep total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m- Working area: 4000 x 2000 mm + additional space for pipe cutting- Linear guides: Rexroth- Double-sided driven portal via racks: ATLANTA precision helical gearing on all axes- Gearbox: STOBER- Drives: Maintenance-free, processor-controlled AC servos from Panasonic- Maximum positioning speed: 130 m/min (one axis), 180 m/min (two axes simultaneously).Acceleration 10 m/s²Positioning speed of the Z-axis 50 m/minTravel distance of the Z-axis 150 mmAcceleration of the Z-axis 0.75 GPosition deviation Pa 0.07 mm according to VDI/DGQ 3441Repeatability Ps 0.03 mm according to VDI/DGQ 3441Ambient temperature: +10 °C to +35 °CRelative humidity: 0 to 90%Machine in very good condition, re ...

sheet width: 2520 mmplate thickness: 4.0 mm STthickness at Niro-steel: 2.0 mmupper clamping bar adjustment: 250 mmadjustment speed: 100 mm/secAdjustment folding beam: 80.0 mmBending speed: 120 Grad/seccompressed air: 6.0 barwork height max.: 869 mmcontrol: POS 2000 total power requirement: 6.0 kWvoltage: 400 Vweight: 4100 kgrange L-W-H: 4120 x 2400 x 2090 mm current list price ~ 90.000 euro from a maintenance workshop with excellent equipment () new touchscreen installed in 2023Features:- CNC electro-motorized universal bending machine High-precision mechanics with modern control technology For individual and series production Robust high-speed machine with high axis speeds Torsion-resistant welded construction- SCHRÖDER CNC control model POS 2000 Control panel front right (operable with PC mouse) Touchscreen replaced in 2023 Color display USB interface Automatic cutting calculation Mat ...

material width: 250 mmmaterial thickness: 2 mmdiameter: 1200 mmtotal power requirement: kWweight of the machine ca.: tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 33 mmsquare edge steel: 30 mmL-beam: 60 x 8 mmhole diameter in sheet thickness: 20 in 13 mmhole punhing press: pressure: 35 thole punching press: throat: 320 mmhole punching press: max. length of stroke: 24 mmhole punching press: capacity (dia. x thick.): 30 x 9 mmhole punching press: capacity (dia. x thick.): 20 x 13 mmtotal power requirement: 1,5 kWweight of the machine ca.: 1,7 tdimensions of the machine ca.: 1,5 x 0,7 x 1,8 mProfile steel shear with:- Hole punch- Notcher- Foot switch- Machine light- Mounted on a trolleyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bending angle max.: 180 °Height: 100 mmclamping range: 40 mmweight: 45 kgDimensions (L/W/H): 420 x 270 x 210 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40.0 tchamfer lenght: 1270 mmdistance between columns: 1000 mmcolumn arm: 200 mmstroke: 100 mmdayligth: 308 mmajustment speed: 150 mm/secworking feed: 1-10 mm/secreturn speed: 100 mm/sectable width: 100 mmtable height: 900 mmcontrol: DNC 60 PS oil volume: 100 lvoltage: 400 Vtotal power requirement: 5.5 kWweight of the machine ca.: 2750 kgEquipment:- CNC electro-hydraulic press brake- CYBELEC DNC 60 PS CNC control Swiveling control panel, front left Tool & program library- CNC electro-motorized backgauge (X-axis) X-axis travel = 800 mm 2x manually adjustable backgauge fingers (R+Z axes) Backgauge on ball screws- CNC controlled axes Y1 - Y2 - X- Rehfuß upper tool system A with quick-change clamping Additional crowning device in the tool holder- 4V universal die block with 60 mm die shoe- 2x sliding material/support arms (Sliding System)- BOSCH/HOERBIGER hydraulic system- SIEMENS ...

sheet width: 1270 mmplate thickness: 2,0 mmdistance between columns: 1295 mmdaylight opening: 46 mm: 135 °total power requirement: Handbetrieben weight of the machine ca.: 0,4 tdimensions of the machine ca.: 1,6 x 0,8 x 1,2 mSegment bending machine, new.Segment widths:25, 30, 35, 40, 45, 50, 75, 100, 150, 200, 250, 270 mm.Including material stop, max 660mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1070 mmplate thickness: 4 mmdistance between columns: 1100 mmdiameter of upper rolls: 110 mmtotal power requirement: 5,0 KWweight of the machine ca.: 1,2 tdimensions of the machine ca.: 2,0 x 0,9 x 1,1 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.