prensas usadas para venda (1,808)

Oferta 25374 Especificações: - Força máxima de compressão 100 t - Curso máximo de carneiro aprox. 500 milímetros - Velocidade de elevação 25 mm/seg. - Retorno 125 mm/min - Altura de instalação aprox. 1000 milímetros - Projeção para o meio do carneiro 380 mm - Superfície de fixação do empurrador 530 x 400 mm - Pino de fixação do êmbolo 40 mm - Tamanho da mesa: 750 x 560 mm - Furo de mesa / através de furo na mesa 200 mm - Altura da mesa acima do piso 720 mm - Quantidade de enchimento de óleo aprox. 200 ltr - Acionamento 400 V / 11 kW - Necessidade de espaço aprox. L 1150 x A 3250 x P 1850 mm - Peso aprox. 4600 quilogramas

Pressing force: 3150kN, table dimensions X/Y: 2500mm/1600mm, stroke (fixed): 280mm, stroke rate: 20-80strokes/min, weight: approx. 68000kg. Including Dreher transfer and feed line. The control system is defective. Documentation available. An on-site inspection is possible.

Pressing force: 800kN, max. tool installation height: 380mm, max. upper tool weight: 300kg, stroke adjustment: 8mm-140mm, ram height adjustment: 100mm, stroke rate: 100/min, throat depth: 350mm, table dimensions X/Y: 850mm/670mm, ram area: 550mm/400mm. Machine dimensions X/Y/Z: approx. 2250mm/1550mm/2750mm, weight: approx. 9000kg. The machine was completely overhauled by the manufacturer in 2016 (retrofit). In 2024, the clutch, rotary union, press safety valve, and hydraulic oil cooler were replaced. In 2021, the drive motor and belt for the flywheel were converted to frequency-controlled speed. Documentation available. An on-site inspection is possible.

Teríamos todas essas máquinas como um pacote para venda. 1x Prensa de freio 160to 3m 1x Prensa de freio 60to 2m 1x robô KRC 150 1x célula robotizada de soldadura com robô Kuka e Fronius TPS4000 1x Mícron

Stroke: 135mm, max. sheet thickness: 20mm, max. bending length: 3050mm, pressing force: 80t, max. operating pressure: 2975psi, max. die opening: 250mm, bending angle range: 1°-42°, oil capacity: 150L, max. tool weight upper/lower: 40kg/115kg. Machine dimensions X/Y/Z: approx. 4000mm/2050mm/2450mm, weight: approx. 6000kg. Documentation available. An on-site inspection is possible.

Descrição: Prensa hidráulica de coluna única com alimentação de ciclo Tipo: HEP 100 Especificações Conexão elétrica: 400 volts/50 Hz +/- 3 % Potência de acionamento: 5,5 kW Necessidade de potência total: aprox. 6,5 kW Tensão de controlo: 24 volts/50 Hz +/- 3 % Hidr. Conexão máxima: 210 bar Conjunto: 200 bar Dados de desempenho Velocidades de RAM AB: aprox. 48 mm/seg. força de compressão máxima de 100 kN Velocidade de trabalho AB reduzida ajustável a: aprox. 10 mm/seg. força de compressão máxima de 100 kN Velocidade da RAM ON aprox. 96 mm/seg. no máximo aprox. 50 kN força de retração Curso do êmbolo: máx. 200 mm Caudal da bomba: aprox. 15 l/min.

Prensa de coluna única Dunkes TIPO: HZS 160 Especificações: Fabricante: Dunkes Modelo: HZS 160 Horário de funcionamento: aprox. 2250 A máquina está em boas condições e totalmente funcional.

A Durmazlar press brake distributed by Knuth is available. Pressing force: 35t, bending length: 1350mm, motor power: 5.5kW, stroke: 100mm, stroke rate: 17/min, max. operating pressure: 240bar, oil capacity: 150l. Machine dimensions X/Y/Z: approx. 1400mm/1400mm/2100mm, weight: approx. 1750kg, operating hours: 1258h. An on-site inspection is possible.

- Capacidade de pressão: 22 t - Projeção: 175 mm - Curso: 120 1/min - Ajuste do êmbolo: 50 mm - Ajuste de altura da mesa 50 mm - Ajuste do curso: 8-80 mm - Mesa: 520 x 400 mm - Êmbolo: 250 x 160 mm - Fivela com fecho de treliça, D35 mm - Potência do motor 1,5 kW - Funcionamento muito suave - Desacoplamento mecânico do acoplamento de cunha rotativa via cilindro pneumático pneumático - Interruptor de pé pneumático - Sem UVV - 4 peças de pés de máquina - Cabo de ligação CEE plugue 16 A - Conexão aérea com acoplamento rápido - Peso: aprox. 2.000 kg - Dimensões: Largura 820 x Profundidade 1100 x Altura 1800 mm

Key data: 630 t, 275 mm

Para venda é uma prensa de rebaixamento usada, fabricante Sack + Kiesselbach, tipo EP 630. A máquina está em muito bom estado. A imprensa trabalhou numa empresa de gravura como prensa de teste. Dados técnicos: Força de compressão: máx. 630 toneladas. Altura de instalação: máx. 325 mm Curso: máx. 275 mm Peso: 4.000 kg

Key data: 100 t

Venda devido à mudança para a imprensa excêntrica Força de prensagem 100 toneladas Profundidade de carga 360 mm Curso 500 mm Luz do dia 800 mm Área do êmbolo: 530 x 400 mm Altura da mesa acima do piso 710 mm Velocidade de trabalho 10mm/seg Velocidade de aproximação 150 mm/seg Velocidade de retorno 150 mm/seg Potência necessária 17 kW Dimensões L x W x A 1.400 x 2.000 x 3.200 mm Peso da máquina aprox. 5,1 t Ano de fabrico 2001 O preço é líquido, o IVA pode ser reclamado. Instalações de carregamento disponíveis Toda a informação sem garantia

Imprensa Walter

Gebr. Prensa pós-flexão Fabr. Graebener, Tipo GRNM, YOC 2005 força máxima de flexão 16 t. Comprimento da ferramenta 1.600 mm Ajuste hidráulico do balanço inferior 2 cilindros Dimensões: 5080 x 3290 x 2540 mm Kj Uovvlllerhyxkenb Peso 65 t.

Pressing force: 4000kN, pressing pressure: 320bar, oil pressure: 250bar, blank holder force: 1600kN, blank holder stroke: 200mm, blank holder dimensions X/Y: 1000mm/800mm, blank holder ejector force: 160kN, ejector force: 63kN, ejector stroke: 100mm, overrun distance: 40mm, overrun time: 190ms. Documentation available. An on-site inspection is possible.

Força de punção 45 t. 2 pcs. disponível a partir do estoque (Vídeo sob alimentação a pedido)

pressure: 20 tthroat: 200 mmstroke: 0 - 50 mmtable:: 360 x 550 mmtable:: 140 mm - Bohrung no. of strokes: 160 Hub/minbore: 35,0 mm - Werkzeug compressed air: max. 6,0 bardayligth: 240 mmtotal power requirement: 2,2 kWweight: 1.250 kgrange L-W-H: 1310 x 1250 x 1860 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20,0 tstroke: 185 mmtable surface area: 170 mm Breitecolumn travel between the guideways: 510 mmweight of the machine ca.: 112 kgdimensions of the machine ca.: 1630 x 560 x 730 mmFurnishing:- Standard with pressure cylinder that can be moved to the left and right- For aligning, pressing, bending, assembling gears, discs, etc.- Standard with foot pedal and hydraulic hand pump for piston delivery- Standard with support prism for aligning shafts- With automatic piston retraction by integrated return spring as standard- Height-adjustable press table with locking bolts- Large manometer for reading the compressive force- Including two-stage hydraulic pump- Robust construction with welded steel frameThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 tstroke: 150 mmtable surface area: 185 mm Breitecolumn travel between the guideways: 530 mmweight of the machine ca.: 162 kgdimensions of the machine ca.: 800 x 700 x 1805 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 50 tstroke: 200 mmtable surface area: 730 x 205 mmdayligth: 1050 mmcolumn travel between the guideways: 730 mmweight of the machine ca.: 288 kg.Description :- Standard with cable winch- for easy height adjustment of the support table- Piston delivery either manually or pneumatically- Powerful workshop presses for craft and repair businesses- Optimum price-performance ratio thanks to rational design- The standard foot pedal keeps your hands free for the workpiece- Increased range of application thanks to the optionally. available pressure mandrel set (10 pieces).- Pressure cylinder with integrated return spring for piston return- Welded steel frame for heavy use and high stability- Versatile in use thanks to the pressure cylinder that can. be moved to the left and rightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 tchamfer lenght: 3100 mmdistance between columns: 2600 mmcolumn arm: 250 mmram stroke speed: 100 mm/secreturn speed: 75,0 mm/secwork speed: 7,0 mm/minwork stroke: 180 mmdayligth: 415 mmoil volume: 200 ltr.table height: 900 mmvoltage: 400 Voltrange L-W-H: 4450x2050x2650 mmFurnishing:- DELEM - CNC control model DA-58T- controlled axes: Y1 - Y2 and X- FIESSLER AKAS - laser protection in front of the machine- Deer foot upper tool- Universal die block- manual table crowning- Safety device: light barrier behind the machine- 2 front support arms- SIEMENS - electrical system- BOSCH / HOERBIGER hydraulic system- CE mark / declaration of conformity- Operating manual: machine and control- Safety manual: press brakes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 400 tchamfer lenght: 4100 mmdistance between columns: 3550 mmcolumn arm: 510 mmram stroke speed: 110 mm/secwork speed: 8.4 mm/secreturn speed: 130 mm/secwork stroke: 375 mmdayligth: 650 mmtable height: 1000 mmtable width: 240 mmback stop - adjustable: max. 800 mmoil volume: 400 ltr.voltage: 400 Volttotal power requirement: 30.0 kWweight: 26409 kgrange L-W-H: 5450 x 2650 x 3470 mm-------------------------------------------------- HIGH-SPEED hydraulic press brake withincreased installation heightincreased cylinder strokeenlarged projection-------------------------------------------------- Furnishing:- DELEM CNC control model DA 66T- swiveling touchscreen control unit- 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning- electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm- on ball screws- controlled electr. Stop fingers Z1 + Z2- split upper deer foot ...

pressure: 40.0 tstroke: 285 mmflat steel: 250 x 24 mmworking feed: 10.0 mm/secreturn speed: 10.0 mm/minwork height max.: 930 mmtable:: 660 x 1250 mmtotal power requirement: 4.0 kWmotor: 400 Volt 50 Hzoil volume: 40.0 lweight: 800 kgrange L-W-H: 1450 x 800 x 1300 mmFurnishing :- electro-hydraulic horizontal bending machine- large, robust machine table made of hardened steel- Machine made of hardened and ground forged steel- Digital display for stroke setting Programming of 1x bend end point & 1x retract point possible- 1x tool set (1x bending punch / 1x 1V die)- infinitely variable adjustment of the bending speed and pressing force- 1x manual material stop- Free-moving dual footswitch- Machine can be moved with a pallet truck/stacker- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20.0 tstroke: 185 mmflat steel: 200 x 12 mmworking feed: 10.0 mm/secreturn speed: 10.0 mm/minwork height max.: 930 mmtable:: 480 x 1060 mmtotal power requirement: 2.2 kWmotor: 400 Volt 50 Hzoil volume: 12.0 ltr.weight: 530 kgrange L-W-H: 1150 x 480 x 1400 mmFurnishing :- electro-hydraulic horizontal bending machine- large, robust machine table made of hardened steel- Machine made of hardened and ground forged steel- Digital display for stroke setting Programming of 1x bend end point & 1x retract point possible- 1x tool set (1x bending punch / 1x 1V die)- infinitely variable adjustment of the bending speed and pressing force- 1x manual material stop- Free-moving dual footswitch- Machine can be moved with a pallet truck/stacker- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 tchamfer lenght: 3100 mmdistance between columns: 2550 mmthroat: 250 mmstroke: 120 mmajustment speed: 70.0 mm/secworking feed: 7.0 mm/secreturn speed: 60.0 mm/secdayligth: 325 mmtable width: 180 mmwork height max.: 915 mmoil volume: 150 ltr.total power requirement: 12.5 kWweight of the machine ca.: 9100 kg.range L-W-H: 3200 x 1325 x 2470 mm well-maintained condition from a maintenance workshop ()Equipment:- simple, conventional electro-hydraulic press brake with torsion shaft for parallelism of the upper beam- electro-motor-driven back stop, with ball screws (X axis) with 2x manually adjustable stop fingers fine adjustment via handwheel at the front, with analog position display- electro-motor-driven adjustment of the immersion depth (Y1+Y2 axis) with digital position display- swiveling operation, left-hand side- split deer foot + pointing tool- 1x rotatable Multi V univers ...

Pressione o freio com a prensa de célula do robô Stäubli Fabricante: LA G Modelo: GBS R 1250 50 A máquina só foi usada por um período muito curto de tempo.

pressure: 1000 tdistance between columns: 5000 mmstroke: 500 mmHeight of centres: 400 mmMotor output: kWreus: U/minOverall size: 6000 x 2500 mmWeight: 1000 kgDistance between centres: 3500 mmtotal power requirement: kWweight of the machine ca.: 220 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 2500mm, max. sheet thickness aluminium/steel/stainless steel: 3mm/2mm/1.25mm, feeding length range: 575mm-2500mm, feeding width range: 210mm-1500mm, max. bending height: 200mm, max. negative bend: 35mm, max. diagonal twist: 3300mm, rotary table position: 0°/90°/180°/270°, working height: 1150mm. Clamping stroke: 210mm, clamping force: 240kN, clamping lowering and return speed: 50mm/s, upper beam swivel range: 135°, upper beam swivel speed: 90°/s, lower beam swivel range: 135°, lower beam swivel speed: 90°/s. Machine dimensions X/Y/Z: approx. 4050mm/1600mm/2400mm, weight: approx. 13000kg. Documentation available. An on-site inspection is possible.

PRESS DESIGN  drive system: hydraulic   frame design: C-frame, single sided PRESS FORCES  total force (nominal): 12 toSLIDE  stroke: 200 mmELECTRICAL SPECIFICATIONS  mains voltage: 380 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  total weight approx.: 1000 kgHour counter: 30181 hlast safety check: 27.07.2023, overrun time 38 ms, overrun distance 60 mm

CONTROLS  PLC SIEMENS S7 PRESS DESIGN  drive system: knuckle-joint   frame design: H-frame, monoblock   openings in uprights: yes   number of suspensions: 2   feedstock transport direction: left to right PRESS FORCES  total force (nominal): 315 to  nominal work capacity: 38 kNmPRESS TABLE  table surface (left-right): 2000 mm  table surface (front-back): 1200 mm  thickness of bolster plate: 200 mmSLIDE  slide force: 315 to  table surface (left-right): 1995 mm  table surface (front-back): 1100 mm  stroke: 160 mm  stroke rate (max.): 80 /minSLIDE (MECHAN. PRESS)  slide adjustment: 140 mm  stroke rate (min.): 20 /min  stroke rate (max.): 80 /min  main drive power: 90 kWTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 555 mm  distance between columns (H-frame): 2060 mm  passline opening (free passage in side columns): 1060  ...

pressure: 60 tthroat: 280 mmstroke: 10-140 mmno. of strokes: 110 Hub/minram - range of adjustment: 60 mmtable surface area: 740x560 mmram surface: 380x195 mmhole in the table: 300x200 mmtable height: 760 mmtool hole in ram: Ø 40 mmweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.