tornos usadas para venda (2,954)

turning diameter: 356 mmturning length: 510 mmcontrol: M 730 BM total power requirement: 40 kVAweight of the machine ca.: 6,6 tdimensions of the machine ca.: mCNC control:Mitsubishi 730 BMMain spindle:Speed: 5000 rpmPower: 15/11 kW (15% duty cycle / constant)Bar diameter: 65 mmSub spindle:Speed: 6000 rpmPower: 11/7.5 kW (25% duty cycle / constant)Turret:12 stationsTool spindle speed: 10000 rpmPower: 5.5/3.7 kW (5 minutes / constant)Y-axis travel: +/- 50 mmEquipment:Machine with gantry loader:Left-hand installation, 14-station storage, 20-pallet workpiece storage,Double gripper conveyor3-jaw hydraulic KITAGAWA power chuck, 210 mm diameterHigh/low pressure chuck system for main and counter spindlesMABEO high-pressure pump with 1.5 MPa filter unitCoolant gunCoolant sprayer on the chuck for main and counter spindlesCoolant sprayer for the machine bed claddingOil mist separatorHinged belt c ...

turning diameter over bed: 430 mmturning diameter over slide rest: 230 mmturning length: 1000 mmcentre height: 215 mmcentre distance: 1000 mmspindle bore: 56 mmspindle turning speed range: 19 - 2000 U/mintotal power requirement: 7,5 kWweight of the machine ca.: 1,9 tdimensions of machine L x W x H: 2,78 x 1,25 x 1,40 mAccessories: 3-jaw chuck 250 mmø, 4-pos. tool post, solid steadyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 530 mmturning diameter: 150 mmspindle passage: 65 mmcontrol: SIEMENS 840 C travel x1: 175 mmtravel y1: +/- 70 mmtravel z1: 433 mmtravel x2: 175 mmtravel y2: +/- 70 mmtravel z2: 433 mmspindle turning speed range: 38 - 4000 U/minC-axis: 2 x tool turret: 2 x 12 Pos.number of driven tool stations: 2 x 12 tool shaft (cylinder shaft DIN 69880): VDI 30 total power requirement: 33 kWdimensions of machine L x W x H: 3,95 x 2,49 x 2,6 mAccessories: collet fixtures on main spindle and sub spindle, one collet for main spindle and one for sub spindle, various tool holders (for driven tools as well), various spindle reductions, chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 400 mmturning length: 1000 mmcontrol: FAGOR control: CNC 8055/B-T centre height: 200 mmcentre distance: 1000 mmturning dia. over face-slide: 210 mmbed width: 300 mmspindle bore: 65 mmspindle turning speed range: 0 - 3000 U/mintransmission ratio: 2 feeds - longitudinal: 0 - 10.000 mm/minfeeds - cross: 0 - 10.000 mm/minrapid travel - longitudinal/face: 15 m/mintailstock quill diameter: 68 mmtailstock quill stroke: 155 mmtailstock taper MT: 4 total power requirement: 8 kWweight of the machine ca.: tdimensions: 3,1 x 1,9 x 1,78 mAccessories: 3-jaw chuck 200 mmø, MULTIFIX-tool post with various inserts, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 220 mmturning length: 250 mmcontrol: SIEMENS SINUMERIK 820 T swing diameter: 380 mmchucking diameter: 250 mmx-travel: 200 mmz-travel: 250 mmspindle turning speed range: bis 4000 U/minrapid travel - longitudinal/face: 15 m/mintotal power requirement: 27,5 kWweight of the machine ca.: 4,5 tdimensions of the machine ca.: 3,2 x 2,9 x 2,2 macc.: hydr. 3-jaw chuck, various tool holders for turret, chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 16 mmspindle passage: 16 mmturning length: 160 mmcontrol: GE FANUC Series 18 i-T spindle turning speed range: 8000 U/minrapid traverse: 30 m/mintotal power requirement: 2,2 kWweight of the machine ca.: 2,1 tAccessories: bar loader IEMCA, GENIUS 226-32 L, YOM 2002 (for bar dia. 2 - 26 mm and bar lengths 1500 - 3210 mm), chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 110 mmturning length: 450 mmcontrol: Siemens total power requirement: kWweight of the machine ca.: 9000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 160 mmturning length: 550 mmcontrol: Siemens total power requirement: kWweight of the machine ca.: 9000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: - mmturning length: - mmswing diameter over bed slide: - mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mWEILER Bundle- RDU - LZ 330- 2 x Commodor- UD 24- DZ 67 V3The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 550 - 1100 mmclamping length: 1650 - 2400 mmguage width: 1435 mmmotor power: 60 (each Chuck) kwspindle turning speed range: 9 - 180 U/minworkpiece weight: 3500 kgtotal power requirement: 228 kVAweight of the machine ca.: 54 tdimensions of the machine ca.: 7,9 x 3,55 x 3,4 mThe Hegenscheidt-MFD portal wheel lathe is a wheel lathethat is easy to operate and maintain. Its portal design allows for wheel setsto roll through the lathe on shop rails. The mechanical elements and drive system are designed for cutting performance up to 32 mm² per tool post. This allows for a short floor-to-floor time for re-profiling, even for extreme wheelwear conditions.Mounted to each side of the portal type bed are the headstocks, with integrateddrivers, centers and a main drive system fitted to each headstock. Both headstocks are movable for ease of the load and unload functions.- Working R ...

turning diameter: 1000 mmturning length: 3000 mmcontrol: Siemens 828D turning diameter over bed: 1000 mmturning diameter over slide rest: 700 mmworkpiece weight: tspindle drive motor: 33,6 kWspindle turning speed range: 1 - 550 U/mincentre height: 510 mmx-axis: 520 mmz-axis: 3020 mmspindle bore: 260 mmspindle nose: A2-15 tailstock quill taper MT: 5 diameter of quill: 130 mmtailstock quill stroke: 200 mmrapid travel (x and z-axis): 8 m/mintotal power requirement: 40 kVAweight of the machine ca.: 12,2 tdimensions of the machine ca.: 7,52 x 3,2 m- Siemens 828D CNC- C-axis- 8-station tool turret with powered tools (VDI 50), 3000 rpm- Tailstock- Powered tool holders- Chip conveyor- CEOperating hours: 2000The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1930 mmturning diameter over slide rest: 1520 mmturning length: 5000 mmturning speeds: 0,5-250 U/minspindle bore: 105 mmworkpiece weight: 35 tsteady: 400-700 mmsteady: 700-1200 mmsteady: 1000-1600 mmcontrol: Siemens total power requirement: 106 kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamTh ...

turning diameter: 480 mmturning length: 800 mmcontrol: System TX8F turning diameter over slide: 240 mmspindle passage: 65 mmchuck diameter: 200 mmturning speeds: 4000 U/minpower capacity: 30 kWtotal power requirement: kWweight of the machine ca.: 4,3 tdimensions of the machine ca.: mpowered toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1400 mmswing diameter: 1600 mmturning height: 1200 mmturning speed range - milling: 1 - 240 U/minControl: Siemens SIN 820T ram head - cross travel: 1000 mmtotal power requirement: 55 kWweight of the machine ca.: dimensions of the machine ca.: mA.T.C. 12 positionsToolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 660 mmturning length: 2000 mmcontrol: Fagor 8050 turning diameter over bed slide: 370 spindle diameter: 104 mmtotal power requirement: 18 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 930 mmturning diameter over slide rest: 630 mmturning length: 6000 mmturning dia. in gap: 1250 mmspindle diameter: 95 mmspeed: 8-800 (x24) U/mintotal power requirement: 22 kWweight of the machine ca.: 1100 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 2000 mmturning diameter over slide rest: 1050 mmturning length: 7000 mmspeed: 1,6 - 250 U/minvoltage: 380 Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: max.: 4000 mmturning diameter over slide rest: . mmturning length: 7700 mmspeed: 0-750 u/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 2400 mmturning length: 6000 mmcontrol: Siemens 880T Turning diameter over slide: 1400 spindle diameter: 320 mmspeed: 0.4 - 1000 m/minvoltage: 380 Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2500 mmswing diameter: 2700 mmturning height: 1600 mmturning speed range - milling: 1,18 - 32,5 U/minturning speed range - milling: 4,25 - 117 U/minworkpiece weight: 10000 kgside head - cross travel: 800 mmram head - cross travel: 45 degrees - 1000 mmram head - cross travel: 30 degrees - 1000 mmtotal power requirement: 80 kWweight of the machine ca.: tdimensions of the machine ca.: m2-Axis D.R.O.5 positions turretThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle travel: 3000 mmspindle stroke - max.: 330 mm: 2820 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: - mmturning length: - mmcontrol: BOSCH CC 200 total power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mMovie:https://www.youtube.com/watch?v=lr-NrroeTtAThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 380 mmturning diameter over slide rest: 190 mmturning length: 1000 mmtotal power requirement: 4 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 2,5+1+1,8 mMovie:https://www.youtube.com/watch?v=ckpr4-sE7K4The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 220 mmturning length: 450 mmcontrol: Siemens 840 D main drive DC: 27 kWtotal power requirement: 27 + 8,5 + 5 + X kWweight of the machine ca.: 6,5 tdimensions of the machine ca.: 10 x 2 x 2 mMovie:https://www.youtube.com/watch?v=OffdO1J4G5YThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 185 mmz-travel: 360 mmb-travel: 460 mmcontrol: Mazatrol 640 T Maximum swing diameter: 550 mmMaximum turning diameter: 280 mmworkpiece weight max.: 200 kgbar capacity: 51 mmmain spindle speed: 35-6000 U/minmilling head speed: 25-4500 U/minrapid power traverse in X-and Z direction: 30/33 m/minRapid traverse B axis: 30 m/mintool turret: 12 Plätzeweight of the machine ca.: 4100 kgCapacity:Chuck size: 6 inchesMax. swing diameter: 550 mmStandard turning diameter: 221 mm Max. turning diameter: 280 mmMax. bar capacity: 51 mmDistance between spindle nose and turret edge: 80–535 mmMain spindle:Speed: 35–6000 rpmSpindle bore: 61 mmCounter spindle:Speed: 35–6000 rpmSpindle bore: 52 mmTurret:Number of tools: 12 piecesTool size: External turning t ...

centre height: 200 mmcentre distance: 1.000 mmspindle turning speed range: 1600 U/minspindle bore: 42 mmturning length: 1600 mmturning diameter over bed: 410 mm: 230 mmmachine weight ab.: 1.700 kgdimensions: 2000 × 1000 × 1500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 330 mmturning length: 669 mmcontrol: Sinumerik 828D total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Sinumerik 828D12-fold revolver Sauter VDI40driven toolsC-axis3-jaw chuckTool Eyepart catcherchip conveyortail stockcoolant device with high pressure pumpbar loading device IemcaTechnische Daten / technical details:Umlaufdurchmesser über Bett / rotary diameter over bed 600 mmmax. Drehdurchmesser / max. turning diameter 330 mmmax. Drehlänge / max. turning length 669 mmX-Weg / X-travel 260 mmZ-Weg / Z-travel 762 mmDrehzahl / spindle speed 3400 UpM /rpmWerkzeugrevolver / turret head 12 fach /holesmax. Stangendurchmesser / max. bar diameter 75 mmEilgang X / rapid feed X 20 m/minEilgang Z / rapid feed Z 24 m/min.Gewicht der Maschine ca. / weight ca. 5700 kgT ...

turning diameter over bed: 380 mmturning diameter over slide rest: 190 mmturning length: 1000 mmbar capacity: 56 mmturning speed range: 25 - 2000 U/minspindle nose: A2-6 total power requirement: 4,0 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: LBH ca. 2,5 x 1,2 x 1,8 m- RÖHM 3 Jaw Chuck Ø 250 mm- MULTIFIX Holder - Size B - Tailstock- Coolant pump with reservoir- Various turning tool holders- Various small partsWorkshop machineOtherwise, the gearbox runs quietly and the guides have no scratches, etc.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 7100 mmswing diameter: 8000 mmturning height: 5030 mmdistance between table and cross rail: 5495 mmworkpiece weight: 200 tfaceplate turning speed range: 0,3 - 19 U/minmain drive motor: 125 kWcross travel: 4400 mmswivel range of slides - vertical: +30 / -15 °Control: FANUC 18i-TB total power requirement: ca. 155 kWweight of the machine ca.: 291 tdimensions of the machine ca.: 8,6 x 17,6 x 8,3 m2003 Retrofit and change to CNC- CNC Control Fanuc 18i-TB--2-Axis simultanous (X- & Z)- Z-Axe with hydraulic balance- Digital Scale in X and Z Axis- 2 rams on crossrailThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 410 mmy-travel: 570 mmz-travel: 140 mmcontrol: Mazatrol Matrix Maximum working diameter: 545 mmMaximum working length: 519 mmmain spindle speed: 35 - 6000 U/mintool taper: Capto C6 rapid traverse y/x/z axis: 30/26/33 m/minPerformance/capacity:Max. swivel range: 545 mmMax. machining diameter: 545 mmMax. outside diameter for bar work: 51 mmMax. machining length: 519 mmMax. workpiece weight:-Chuck work: 150 kg -Bar work: 200 kgMain spindle:Spindle speed: 35-6000 rpmSpindle bore diameter: 61 mmMax. torque: 161 NmTailstock:Rapid traverse: 8 m/minTravel range (advance/return): 434/281 mmMilling head:Milling head type: Single spindle with ATCTool shank type: Capto C6Tool size: External turning tool: 20 mm Internal turning tool: 32 mm Milling tool: Max. 90 ? x 200 long mmMilling s ...