gluespreader machines used for sale

Manufacturer: Dimter , Type: Profipress 3500, Year: 2003, Continuous flow system: yes, Work piece width min-max mm: 300 - 3500, Min.-max. workpiece length in mm: 1300, Min.-max. workpiece height in mm: 11 - 60, Hydraulical/pneumatical: yes, High-frequency: yes, Warm water: yes, Thermoöl: yes, High / low pressure: yes, Cylinder vertical: yes, Cylinder horizontally: yes, Pre-assembling conveyor: yes, Glue application machine: yes, Clamping: yes, Disc saw transverse: yes, FREE TEXT: 2800 Betriebsstunden, Year :2003

Description: Technical data: tape thickness: 0.3 - 3 mm material thickness: 8 - 60 mm conveyor speed: 18 - 25 m / min The edgebander consists of the following aggregates: • 2 pre-milling machines for material processing (3 kW each) • material heating lamp • glue heating vessel • container with roller for applying glue to the material • push rollers • 2 stripping units (each 0.8kw) • 2 units with radial cutters for processing the upper and lower edges (1.5 kw each) • 2 postforming aggregates • 2 cyclings • polishing brushes with liquid injectors The edging is fully automated, which means that the height of the beam, pre-milling machines, rollers and all the settings of the cutter depending on the thickness of the material and the strip are adjusted on the main monitor.serial number: 0-200-19-0792, edge thickness: 0.3 - 3 mm, workpiece thickness: 8 - 60 mm, Approx. On ...

Description: serial number 101200 , edge height 10/60 mm , band thickness 03/3 mm , trimming height 10/60 mm , minimum ray with concave curve 20 mm , minimum panel lenght 280 mm , voltage 380 V, 3 phase, 50 Hz , current 13,7 A total installed power 4,5 kW operating pressure 7-8 atm , serial number: 101,200, Approx. Onsite Dimension. (l x w x h): 1,650 x 800 x 1,600 mm, weight approx.: 400 kg

I am selling an edge banding machine Holz-Her Sprint 1310, built in 2004. Configuration: Edge banding Cartridge glue Cross-cut saws Swivelling radius milling machines Radius pulling blade Polishing brushes Very good condition, fully operational.  ... more information

SECOND-HAND GLUE SPREADER OSAMA MOD. S2 R 1300 - CE RULES - working width 1300 mm - n. 2 rollers - Year 2004  ... more information

SPECIFICATIONS: Max. working length mm: 1300 2 rollers, diameter mm 200 top - bottom Complete with: - Glue container - Roller protection grille - Safety pedal  ... more information

Description: This machine ,is ,checked and refurbished by the distriutor , and he offer 6 months guarantee Single-side edging machine Joint triming unit , EVA gluing ,unit. Two - motor end trimming unit. Straight trimming unit. Inclined trimming unit. Profiling unit, 1 motor . Scraping ,unit. Scraping - edge unit. Cleaning brushes unit.  ,serial number: 117, joint trimming unit: si, gluing unit: si, snipping unit: si, edge buffing unit: si, return system: no, total power approx: 12,3 kW, Approx. Onsite Dimension. (l x w x h): 5,500 x 2,000 x 1,950 mm, weight approx.: 700 kg

Equipment: - Quick-change Quickmelt gluing part for hot melt adhesive. - Automatic edge magazine with roll plate and autom. Edge feeder - extended inlet ruler, adjustable - heavy pressure zone (with pgroamm adjustment) with a driven main pressure roller, as well as 3 repressure rollers - Motor-adjustable upper pressure. - Control panel on the machine inlet. - Electronic control PC 16 - Modem for remote service and remote maintenance - Noise protection cladding - autom. Chain track central lubrication - Interface for return (electronic) DAHR01/02/15 Aggregate assembly - Release agent specification workpiece - Joining milling unit 2 x 2.2 kW - Cross-cut unit 2 x 0.35 kW, pneum. Adjustment chamfer/straight - Milling unit 0-25 degrees, 2 x 0.55 kW counter-rotation, to flush milling machine, pneum adjustable pneum. 2-point adjustment Vertical probe rollers - Milling unit ...

Description: no. 1 Alignment guide , no.1 top pressure device , no. 1 Inserting unit Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg ... more information

Manufacturer: Italpresse, Year: 2005, Type: Lock Form SS AIR , Work piece width min-max mm: 1330, Min.-max. workpiece length in mm: 2680, Min.-max. workpiece height in mm: 55, Heating system: elektrisch, Max. temperature °C: 150, Placing table: 2, Size of heating plate mm: 1450 x 2800, Pin system: no, Multifunktionsrahmen: yes, Automatical glue supply: yes, Year :2005

Manufacturer: Baberan Kaschieranlage, Type: ECO Line 1400 DSI, Year: 2006, Work piece width min-max mm: 250-1350, Min.-max. workpiece length in mm: 450, Min.-max. workpiece height in mm: 6-40, Working widht max mm: 1350, Feeding speed min-max m/min: 10-40, Brushing machine: yes, Urea plant: yes, Brushing machine: yes, IR zone: yes, Hardener machine: yes, Leimauftragsmaschine : 2, Double-sided: yes, Roller diameter mm: ca.300, Lamination calender: 2 Stück, Diameter of lamination calender in mm: ca.400, Roller diameter mm: ca.300, Rollers heated: yes, Year :2006

Description: Serial number: 06.134.019 Edge thickness: 0.4 - 2 mm Workpiece feed speed: 5 m/min Milling unit speed: 9000 rpm Diameter Widia milling cutter: 72 mm LEISTER hot air gun power: 3000 W Working temperature (min./max.): 20/500°C With operating instructions Work table size: 1800 x 300 mmApprox. Onsite Dimension. (l x w x h): 2,100 x 950 x 1,100 mm, weight approx.: 210 kg

I am selling a fully equipped edge banding machine BRANDT ProfiLine KDF 790, built in 2006: Configuration: Input stop can be adjusted by menu Manually adjustable joint milling Edge banding with preheating tank Material pressure zone can be adjusted by servo motor Pneumatically adjustable cross-cut saws Heavy milling at the top + at the bottom manually adjustable Radius milling top + bottom servo motor adjustable Groove saw unit at the bottom Round unit 2-motor servo motor adjustable Radius scraper blade R2 pneumatically adjustable / second set R1 included Scraper blade surface Polishing brushes Separator injection at the front Clean injection at the rear Working height adjustable by servo motor Material height 6-60mm Edge material thickness 0.4-12mm Feed speed up to 20m/min. Overall length including feed plate 7860mm Mileage status 1,650,000 meters glued. Incl ...

I am selling a fully equipped edge banding machine BRANDT Optimat KDF 550 C, built in 2006: Configuration: Manually adjustable entrance stop Manually adjustable joint milling Edge banding EVA Material pressure zone can be adjusted by servo motor Pneumatically adjustable cross-cut saws Radius milling top + bottom manually adjustable Round unit 2 motor manually adjustable Radius scraper R2 pneumatically shut-off Scraper blade surface Polishing brushes Control panel Power Control PC20+ Working height adjustable by servo motor Material height 8 - 50mm Edge material thickness 0.4 - 8.0mm Feed speed 11m/min. Assembly length including feed plate 5860mm Total weight 2660kg Very good condition, fully functional!

Description: Spindle moulder group in input Glue group End trimming group Straight trimming group Inclined trimming group Profile group 1 motor , NOTES: Electronic machine and the PLC does not workserial number: 365/0-602 5005052, Approx. Onsite Dimension. (l x w x h): 10,200 x 1,800 x 1,900 mm, weight approx.: 2,500 kg

Description: INVITATION FIX on 5 July 2024 in the morning ! AUTOMATIC ADJUSTMENT OF OPTIMAT INFEED GUIDE EXTENSION INFEED 500 MM OPTIMAT SLIDING CARRIAGE SEPARATING AGENT SPRAYER TOP/BOTTOM AUTOMATIC ADJUSTMENT OF OPTIMAT PRESSURE ZONE PRESSURE TANK FOR PU GLUE CONTAINER FRONT PART PNEUMATIC ADJUSTMENT OF CROSS-CUT MOTOR PNEUMATIC ADJUSTMENT OF PRE-MOULDING UNIT MOULD MILLING UNIT FK11 MANUAL BELT SANDING UNIT KS10 PNEUMATIC ADJUSTMENT KS10 BEVELLED/RADIUS SANDING UNIT PROFILE OPTIMAT PN10 FINISHING UNIT FINISHING UNIT FA11 TOP / BOTTOMedge thickness: 0,4 - 20 mm, workpiece thickness: 16 - 60 mm, feed: 18 m/min, joint trimming unit: 2 x 3 Kw, workpiece pre heater: yes, gluing unit: A 20, snipping unit: 2 x 0,8 Kw, rough trimming unit: 2 x 1,5 Kw, profile trimming unit: FK 11, edge sanding unit: yes, flat scraping unit: yes, profile scraping unit: yes, edge buffing unit: yes, control: PC ...

Workpiece return for single-sided edge banding machines in left-hand design, machine length approx. 8-10m  ... more information

Edge thickness 0.4 - 3 mm Workpiece thickness: max 50 mm Min workpiece length 150 mm Feedspeed 22 m/min  ... more information

Description:  , Edge banding machine with glue tank , Glue tank capacity : 1 litre Feeder height numerical  ,indicator , End triming unit , Edge feeding unit , work surface height: 904 mm , Minimun panel size: Lenght: 180  ,mm Width: 65 mm ,  ,serial number: KK1 026432, return system: no, Approx. Onsite Dimension. (l x w x h): 2,000 x 900 x 1,400 mm, weight approx.: 350 kg

Barberan Lamination line include following machines: 1- GLUE UNIT ( MELER BRAND 250 LT) 2-FRONT LIFTER 3-FORK FOR FRONT LIFTER 4-GLUING MACHINE BARBERAN EN-PUR-4-1600 5-CONVEYOR BARBERAN IT-4000/16 6- LOADING FOR FOR CONVEYOR 7-PRESS BARBERAN CAL-H-2-1600 8- GUIDE ROLLER 9- BACK LIFTER  ... more information