grinding machines used for sale

Inv. Num. : 6016 Type: S2-T233 Producer: VIET Created: 2005 Parameters: Operating hours: 1600 h Switching-on hours: 600 h Sanding belt length: 5090 mm Sanding belt width: 150 mm Vacuum bandwidth: 1350 mm Grinding roller: 190 mm 2 longitudinal grinding belts at the top 3 engines Cross loop unit

Wide belt sanding machine Ott Type: RSKO 1100 Grinding width 1100 mm 1 combi unit sanding belt Connected load 14.5 kW  ... more information

Long belt sanding machine Johannsen Type T 88 K-pneuma Machine No. 10771 For sanding, matting and polishing wood and lacquer surfaces, Wooden and plastic window frames Table size 2900 mm x 1400 mm For grinding long parts that extend beyond the machine Workpiece height maximum 500 mm 2 scraper brushes on the table Table height adjustment by means of handwheel Motor power 6/8 kW Sanding belt left and right rotation Including sanding pad 640 x 140 mm Including pneumatic sanding shoe 300 x 140 mm Upper sanding support throughout With cover for upper sanding pad Disc disc diameter 280 mm with support Sanding belt dimensions 7800 mm x 150 mm Belt speed 11/22 m/sec. With belt blow-out nozzle With extraction fan Suction nozzle diameter 180 mm Space requirement 4200 mm x 2600 mm Dimensions 4000 mm x 1700 mm x H 1460 mm Weight approx. 1400 kg

Grinding machine Löwer ESM 300 Built in 1987 Grinding width 290 mm Sanding belt width 300 mm Oscillating abrasive belt Usable height 120 mm Abrasive belt length 1800 mm Table length 1200 mm With support rail Support rail length 3000 mm Feed speed 3/6/12 m/min. Motor power drive motor 7.5 kW Air connection 6 bar Brush unit in the outlet The abrasive belt is guided over three rollers. Between the two lower rollers is the sanding pad. To get a clean cut, the front lower roller has been rubberized. She takes care of the pre-grinding, and the sanding pad behind it the finishing touches. Weight 798 kg with pallet Dimensions with support rail 3000 mm x 1200 mm x H 1700 mm Dimensions without support rail 1300 mm x 950 mm x H 1700 mm

Grinder for bucket seats with 2 air bellows  ... more information

Drawer fitting machine husband Type: XII LOD 2 oscillating abrasive belts Grinding wall surface 760 mm long x 280 mm high max. drawer width - fit width 1000 mm maximum drawer height 250 mm Width adjustment by handwheel Support tables on each grinding wall outside Support table size 650 mm x 235 mm Engine strengths 1 x 4.8 kW and 1 x 7.5 kW Dimensions 1900 mm x 1300 mm x H 1200 mm

Wide belt sanding machine Bütfering Type: MA2W1100 Year of construction: 1983 Grinding width 1100 mm 2 grinding units Grinding roller motor power 15 kW and Sanding shoe motor power 15 kW With driven cleaning brush motor 0.55 kW Feed with 2 speeds 10 and 20m/min. Feed motor 1.8 kW Vacuum transport carpet complete with fan Constant table The complete machine upper frame is moved via four trapezoidal threaded spindles. Sanding belt width 1110 mm Sanding belt length 1900 mm Workpiece thickness maximum 150 mm Total connected load 35 kW Industrial version Suction connections 2 x 200 mm, 1 x 160 mm diameter Weight approx. 3.800 kg Dimensions 2500 mm x 1750 mm x H 2000 mm

Distributor brush machine Working width 1250 mm 2 obliquely arranged, driven distributor brushes each 0.37 kW Brush length 1800 mm, diameter 240 mm Height adjustment by handwheel 0 – 150 mm Transport belt width 1250 mm Feed speed 2 stages slow-fast with exhaust fan on the machine Machine dimensions: L 3000 mm x W 1600 mm x H 1870 mm Weight approx. 1500 kg

Long belt grinding machine Type DZJA250 Year of construction 1983 Table size 2500 mm x 1350 mm 2 x sanding shoe available In sizes 1200 mm x 150 mm and 250 mm x 150 mm Table height adjustable with crank Table height adjustment by 500 mm Sanding belt pre- and counter-run Motor power approx. 4 kW Suction connection diameter 2 x 120 mm Shipping dimensions 3550 mm x 900 mm x 1500 mm when the work table is dismantled

Edge grinding machine Rehnen -new- Type: Junior R 1 with motor band oscillation with support table at the deflection roller Additionally included in the scope of delivery is an angular and miter stop Engine power 2.2 kW Tape speed 22 m/sec Grinding belt dimension 2280 x 150 mm Abrasive back wall 850 x 150 mm Grinding unit swivelable 90 - 180° Grinding belt tension pneumatic Table size 750 x 350 mm The top in heavy casting with built-in three-phase motor 380 V, 2.2 kW 2850 rpm The machine is equipped with built-in switch-plug combination; Motor circuit breaker and main switch according to VDE Dimensions of the abrasive belt rear wall 850 x 150 mm the abrasive back wall is glued with a graphite sliding surface Steel table adjustable in height by spring pressure Grinding belt dimension 150 x 2280 mm The machine is supplied with 2 pieces of grindin ...

Grinding machine for curved parts Molded part grinding machine Make Calmbach & Söhne Double-sided grinding of shaped parts Oscillating rubberized grinding rollers Workpiece thickness maximum 120 mm Workpiece width maximum 130 mm Engine strength 2 motors 1.5 kW each Oscillation electromotor 4 speeds Suction connection diameter 120 mm Includes 20 grinding belts grit 60 + 120 Dimensions 1200 mm x 1500 mm x H 1550 mm

Code: 0318 Brand: SCM MINIMAX Model: UNILEV N15 Universal sanding machine for straight and shaped edges for sanding furniture, wooden doors, kitchens, furniture, chairs, armchairs, frames and various Technical data: Tilting worktable 0-45° Additional worktable for machining of shaped workpieces Worktable length mm 1440 Abrasive belt width mm 150 Vertical movement of oscillating unit mm 150 Belt motor 2 speeds Abrasive belt length mm 2170 Operating pressure 6 bar Overall dimensions mm 1450 x 720 x 1400 h Weight kg 450

Grinding machine for curved elements OMAB/Comec Working width 200mm Sanding belt oscillation Pneumatic pressure of the material Main Motor 5.5kw Feed motor 0.25kw Extraction spigots 2x100mm Machine dimensions 210x80x150cmH Weight 450kg  ... more information

Wide-belt sander SCM Sandya Uno Main engine 7.5kw Feed motor 0.3kw Two grinding units Working width 900mm Pneumatic oscillation Spotted shoe Dimensions 1420mm 1790mm 1590mm Weight 1050kg  ... more information

Galli LVG 120 edge sander Grinding height 240mm Work surface length 1200mm Sanding unit tilting at an angle of -20/+20° Mechanical Oscillation 4kw main motor  ... more information

Heesemann Long belt sander Grinding length 2.45m Grinding width 0.8m Extractable G&-5100-O0691  ... more information

Type SM/1400 Working width 1400 mm Working length 3500 mm Working thickness 5-150mm Sanding roller speed control 420-960rpm Feeding speed 0-30 m/min Total motor power 35,7 kW Disc motor 5,5 kW-2 Cross motor 0,37 kW -2 Feeding power 1,3 kW Up and down motor 0.25kW-2 Vacuum table (no hoses) Made in Italy 1988m/y/ g Transport dimensions 5200x2900x1900mm Weight 3100 kg Price 7999 Eur (EXW Jonava, Lithuania)

Type 1300-2S Working width 1300 mm Min.working length 400 mm Working thickness 2-80mm Grinding roller speed - Frequency control Feeding speed 5-20 m/min Total motor power 6.27 kW Transport dimensions 1700x2100x1400mm Weight 1200 kg Price 6100 Eur (EXW Jonava, Lithuania) Specifications Type 1300-2S Working width 1300 mm Min. Working length 400 mm Working thickness 5-140mm Grinding shaft speed – adjustable by frequency converter Feed speed 5-20 m/min The total power of the motors is 6.27 kW Dimensions for transportation 1700x2100x1400mm Weight 1200 kg Price 6100 Eur (EXW Jonava, Lithuania)

Type 1000-2S Working width 1000 mm Min.working length 400 mm Working thickness 2-80mm Grinding roller speed - Frequency control Feeding speed 5-20 m/min Total motor power 4,12 kW Transport dimensions 1700x1600x1400mm Weight 800 kg Price 4130 Eur (EXW Jonava, Lithuania) Specifications Type 1000-2S Working width 1000 mm Min. Working length 400 mm Working thickness 5-140mm Grinding shaft speed – adjustable by frequency converter Feed speed 5-20 m/min The total power of the engines is 4.12 kW Dimensions for transportation 1700x1600x1400mm Weight 800 kg Price 4130 Eur (EXW Jonava, Lithuania)

Power: 3 kW  ... more information