subcategories
(3rd category level)
Manufacturer:
(Category: 703)
Splitting saw Ferrando SA 202M –80 2kW; 42V; 400V Cutting length 40cm The saw is intended for cutting pigs and young cattle ! The saw has been overhauled . ... more information
Throughput depends on material type, speed, and cutting set Capacity: up to 4.000 kg/h Main motor power: 40 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 150 Length: 150 Height: 180 ... more information
Bowl cutter Kramer+Grebe SM 80 Overhauled Technical data overall dimensions 2000x1150x1800 mm; bowl 80 ltr; power supply 400 V, 50 Hz; power: main motor 15/20 kW; bowl motor 1,1/1,4 kW; mixing motor 1,3/1,8 kW; unloader motor 0,75 kW; 2 knives speeds 1500/3000 rpm; 2 bowl speeds; 2 mixing speeds; weight 1500 kg
Grinder with mixer Laska Type: WWR 130 2X Voltage: 3 x 400V 50Hz Electrical power: 21kW Year of production: 2018 ... more information
Korimat KA 160 autoclave, volume 120 litres, 2.5 bar, MC control, as an autoclave for sterilisation with core temperature measurement, as a pressure pressure boiler for cooking meat, vegetables, soups and ready meals, electrically heated, circular marbled surface. Accessories: Floor plate, insert basket and lifting hook for floor plate
Lifting tipper Itec Frontmatec Type 27000 Machine Lift-tilt device, lifting tipper Make Itec, type 2700, year of construction 2017 for accommodating 200- and 300-litre standard loading trolleys lifting capacity: 350 kg Tipping height: 2.231mm incl. 1 standard loading trolley 3x460V 50 Hz 0,75 kW - very good condition, hardly used - was used to feed a piston filling machine - Documentation/operating instructions available Visit in Korntal-Münchingen possible
Band saw Bizerba FK 23, Table band saw, completely in stainless steel, built in 2013, Connection 400V, dimensions LxWxH approx. 58x53x85cm, weight approx. 80kg, good used condition, fully functional ... more information
Band saw Bizerba FK 23, Housing completely in stainless steel, with brake,, Connection 400V, built in 1998, Dimensions LxWxH approx. 58x52x86cm, weight approx. 79kg, very good used condition, works perfectly ... more information
Schroeder-Combinator / scraped surface heat exchanger technical details: capacity/ flow rate: 20-100 ltr/h against 12 bar engine power: 3,5 KW dimensions: length x with x higth : 170 x 43 x 85 cm weight ca.: 150 kg with this device you can go with: hight viscosity and lumpy food for heating, cooling, mixing and pumping
plate heat exchanger Gea Ahlborn with 2 centrifugal-pumps:(hotwaterpump and recirculationspump) Manufacturer: Gea Ahlborn 6 Sections: preheater 1,preheater 2,heater,precooler 1,cooler,hotwater Type: VT 4 P (1.4401) Fabr.Nr.: 177/4113 flow rate: ca. 750 ltr/h (5 to 72/75°C) - 80 % gain of heat day of construction:1994 weight : ca. 220 kg Dimension : length x width x hight: ca. 103 x 44 x 143 cm
Cheese pan / layered cheese pan / curd tub / drain versatile use Dimensions: Length x Width x Height: 61 x 62 x 81 cm Content approx.: 75 litres Expiration NW: 50 ... more information
Tumbler Rühle MKR 130, vacuum cooling tumbler, Connection 400V, year of construction 2000, Dimensions LxWxH approx. 120x75x130cm, weight approx. 340 kg, good used condition, minus button does not work (see end of video), otherwise fully functional ... more information
Mixer Stork&Herrmann MA 200D pro, with 2 vats each 200 litres capacity, tubs mobile, with operating instructions, Year of construction 2000, connection 400V, 2,1kW, good used condition, fully functional ... more information
Ice machine Maja SA 415 S, flake ice machine, Daily output approx. 415kg, year of construction 2008, with self-cleaning, mobile ice bucket, external control, Cooling circuit serviced, refrigerant topped up, Connection 400V, dimensions LxWxH approx. 95x80x157cm, weight approx. 240kg, very good used condition, fully functional
Ice Cream Machine Maja SA 175 EL, Flake Ice Machine, Refrigerant has been topped up, Connection 400V, dimensions LxWxH approx. 81x90x132cm, weight approx. 227kg, used, year of construction unknown (presumably around 2000), functional ... more information
Marel Dual Lane Grader This grader is more than just a typical weight-sorting machine – it also offers an additional quality-sorting option. It can be programmed for five different quality grades, which can be set by an operator before the weighing stage. This Marel Dual Lane Grader has 12 gates – 8 on one side and 4 on another. Products that do not pass through any gate proceed straight forward. Moreover, a side with 8 gates can be equipped with two additional trays for the grading-by-weight option. So, in total, this grader can be configured for up to 21 separate outputs. Key Specifications: Production year: 2011 Belt type: Intralox S1600 FT PE Belt size: 356 mm x 18200 mm. Electrical: 3 x 230 Vac, 0.37kW Nominal belt speed: 1.5 m/s at 60Hz Speed is variable, Lenze speed controller. Height of belt over the floor: 1325 mm Overall run length: 9200 mm Run w ...
Slicing-dicing machine by FAM Model: ILC-3D Year: 2000 Power: 4kW Current cutting size: 16x16x16mm Overall dimensions: length 810mm, width 1,850mm, height 1,350mm ... more information
REF-1681 SACCARDO ARTURO CHOP CUTTER Completely made of stainless steel. Manufacturer: SACCARDO ARTURO Model: TITANIO 2. Max. cutting length: 1.070mm. Max. cutting section: 210x240mm. Cuts per minute: 90-180 Cutting thickness: 5-60mm Weight: 330 kg. Year: 2008 3kW Dimensions of the machine: 2,367mm x 832mm; h: 1,496mm
REF-2034 RISCO CONTINUOUS VACUUM SAUSAGE STUFFER Continuous vacuum sausage filling machine Manufacturer: RISCO Model: RS-4003-320SC Year: 1998 Power: 4.5kW Voltage: 400V. 50Hz. Three-phase Weight: 560kg Overall dimensions: 1,000mm width, 800mm length, 1,970mm height ... more information
REF-1902 TEC-MAQ VACUUM MEAT KNEADER-MIXER Meat kneader with vacuum system and T-shaped mixing paddles. Manufacturer: TEC-MAQ. Model: ALFA-150. Serial no. 1125/OC. Year: 1996. 380V. 5,7A. 2.25kW. Capacity: 150 litres. Meat capacity: 80-100kg. Equipped with mechanical variable speed drive. Inner dimensions: length 600mm, width 480mm, height 600mm. Outer dimensions: height 1,600mm, width 700mm, length 1,250mm.