tornos usadas para venda (2,942)

Specifications: - X-axis: 162mm - Z-axis: 750mm - Y-axis: +/- 50mm - C-axis: yes - B-axis: 670mm - sub spindle speed: 4500rpm - sub spindle motor power: 5,5kW - live tooling: yes - live tooling speed: 3000rpm - live tooling type: BMT-55 Machine is equipped with: - Chip conveyor - Bar feeder - live tooling - y-axis - tooling in turret included - pallet with tooling included Auction-ID: A1-45752-10

Unchecked Auction-ID: A1-45973-56

faceplate diameter: 4500 mmswing diameter: 5000 mmturning height: 2500 mmworkpiece weight max.: 63 tno. of the slides: 2 max. ram stroke: 1600 mmfaceplate turning speed range: 0,3 - 32 U/minAnzahl der Drehzahlstufen: 4 total power requirement: 130 kWweight of the machine ca.: 145 tdimensions of the machine ca.: 6,6 x 11,4 x 8,4 m- DRO- 2 swivable Rams (-15° / +40°)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1090 mmturning diameter over slide rest: 700 mmturning length: 6000 mmcentre distance: 6000 mmspindle bore: - mmspindle taper: - turning speed range: U/minpower requirement: 30 kW3-jaw-chuck diameter: mmquick change toolholder: 4 fach Stahlhalter taper in tailstock-quill: MK 6 dia. of quill: 125 mmquill stroke: 260 mmtotal power requirement: 30 kWweight of the machine ca.: 11 tdimensions of the machine ca.: 8,2 x 1,8 x 1,82 m- rapid traverse- tail stock- DROThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 20 mmturning diameter over slide rest: 1200 mmturning length: 3.000 mmcentre distance: 3000 mmdigital readout: 4 - Achsen bed width: 800 mmspindle bore: 122 mmturning speed range: 1,80 - 355 U/minpower requirement: 22 kW3-jaw-chuck diameter: mmtaper in tailstock-quill: 100 (1:20) dia. of quill: 150 mmquill stroke: 350 mmcoolant: voltage: 400 Vtotal power requirement: 31 kWspindle nose: Gr. 11, DIN 55027 weight of the machine ca.: 10 tdimensions of the machine ca.: 8,20 x 2,20 x 2,20 m- Serial No.: 75.217- Rapid feed for carriage- 4-Axis DRO-System SINOThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 455 mmturning diameter over slide rest: 285 mmturning length: 1.000 mmcenter height over bed: 225 mmcentre distance: 1.000 mmdigital readout: 2-Achsen ANILAMbed width: 330 mmspindle taper: KK 6 DIN 55027spindle bore: 45 mmturning speed range: 16 - 1.000 U/minpower requirement: 3,0 / 4,2 kWtaper in tailstock-quill: MK 4 dia. of quill: 62 mmquill stroke: 145 mmcoolant: voltage: 400 Vtotal power requirement: 4,5 kWweight of the machine ca.: 1,95 tdimensions of the machine ca.: 2,45 x 1,10 x 1,80 m- Serial-No.: 29-2561- ANILAM 2-axis digital readout- 4-jaw tool holder- coolant equipmentATTENTION!Machine is sold without a chuck.Upon request and for an additional charge,the following 3-jaw spiral chuckscan be included:- CENTER Ø 200 mm = 780.00 EUR- CENTER Ø 250 mm = 1,030.00 EURThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...

Control: Fanuc 18 iTB Max. turning diameter: 190 mm Max. turning length: 620 mm Greatest: pass round over bed: 190mm Swing dia. over traverse guideway: 190mm Standard turning diameter: 170mm Max. distance between spindles: 970mm Main spindle: - Max. spindle speed: 4.500rpm - Power capacity - main spindel: 18,5 / 15 kW - Spindle bearing diameter: 110mm - Spindle bore: 80mm - Max. bar capacity: 65mm - Spindle nose: A2-6 - Max. chucking diameter: 165mm - C-Axis 0,001 ° Subspindle: - max. spindle speed: 5000rpm - power capacity - Sub spindle 11 / 7,5 kW - spindle bearing diameter: 90mm - spindle bore: 63 mm - max. bar capacity: 51mm - spindle nose: A2-5 - max. chucking diameter: 165mm - C-Axis: 0,001 ° - Traverses Subspindle: 760mm Upper Turret 1: - number of toolpositions: (2x 12) 24 pos. - Number of driven toolspositions: 12 pos - Shank diameter: 25mm - Drill sha ...

Specifications: Control: Fanuc 0i-TD Hours: 12009 Capacity: - Swing over bed: 970mm - Swing over cross slide: 600mm - Centre height: 490mm - Width of carriage: 885mm - Width of cross slide: 350mm - Distance between centers: 4300mm - Width of bed: 560mm Headstock: - Chuck size: 605mm - Spindle bore: 153mm - Spindle nose: A2-11 - Spindle speed: 6.5 ~ 600rpm - Spindle power: 22/26kW Turret: - Tool size: 32mm - 4 positions Tailstock: - Quill diameter: 165mm - Quill traverse: 200mm - Tailstock center: MT#6 - Body movement: motorized Machine is equipped with: - 2 chip conveyors - Motorized tailstock body - Steady rest - Tooling as showed in pictures - Auction-ID: A1-45752-7

greates pass round over bed: 350 mmswing diameter over face slide: 200 mmcentre distance: 800 mmcentre height: 175 mmturning length: 700 mm3-jaw chuck: Röhm Ø 160 spindle bore: 46 mmspindle head: Gr. 5, DIN55027 number of spindle speeds: 18 spindle turning speed range: 31,5-2500 U/mintailstock quill taper MT: 3 weight of the machine ca.: 1000 kg3-axis digital readoutmanual includedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine is equipped with: - chip conveyor - renishaw probe system Auction-ID: A1-45752-13

NEW UNUSED MACHINE WITH DRIVEN TOOLING AND Y-AXIS! Specifications: Spindle: - Spindle hole diameter: 65mm - Bar capacity: 51mm - Chuck: 10” - Max spindle speed: 2600rpm Capacity: - Max. Swing diameter over bed: 600mm - Max. Turning diameter: 420mm - Max. Turning length: 550mm - X-axis: 280mm - Z-axis: 650mm - Y-axis: +/- 50mm - C-axis: yes Feedrate: - Rapid traverse X: 20m/min - Rapid traverse Z: 25m/min Turret: - Positions on turret: 12 - Driven tooling: yes - Tool shank: BMT-55 Tailstock: - Tailstock quill taper: MT-5 - Travel: 600mm Accuracy: - Positioning accuracy: 0.008mm - Repeated positioning accuracy: 0.008mm Machine is equipped with: - Chip conveyor - Tool setter - All tooling in turret included - Tailstock - Tooling as showed in pictures Auction-ID: A1-45752-4

Auction-ID: A1-45793-6

12-fold VDI tool changer with interchangeable holders (excl. tools) Auction-ID: A1-45793-3

: 0554 mm: 370 mm: 3000 mm: 280 mm: 104 mm: 11 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1000 mmmax. torque on the spindle: 900 total power requirement: 17 kWweight of the machine ca.: 6,1 tdimensions of the machine ca.: mA vertical turning lathe with a fixed cross railThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-45793-5

turning diameter over bed: 400 mmturning diameter over slide rest: 260 mmturning length: 1500 mmturning diameter in the gap: 570 mmturning speeds: 45 - 1800 U/mincentre height: 210 mmspindle bore: 52 mmtailstock quill taper MT: 4 MKconnected load frequency: 400 Vtotal power requirement: 3,5 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2,6 x 1,1 x 1,7 mProfessional industrial machinedigital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 280mmBezel fixedBezel rotatingMultifix steel holder.Machine lightFoot brakeremovable chip tray, chip protection wallHardened and ground bed railsComplete coolant systemFeed protectionMachine feetMachine toolThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 330 mmturning diameter over slide rest: 165 mmturning length: 800 mmtotal power requirement: 3 kWweight of the machine ca.: 0,75 tdimensions of the machine ca.: 2 x 1 x 1,5 mNo. 1009Lathe WEILER LZ-300Speed range 24-2800 1/min.Feed rates 0.013-1.27 mm/minSpace requirement approx. 19 0x 700 mm,Weight approx. 700 kg.The e-lead spindle is removed from the machine3-jaw chuck, collet quick-clamping device with various collets, 1 tool cabinet with various accessoriestool cabinet with various accessories.Working area: 165 x 600Drive: 3 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 570 mmturning diameter over slide rest: 365 mmturning length: 3000 mmtotal power requirement: kWweight of the machine ca.: 5 tdimensions of the machine ca.: 5,5 x 1,44 x 1,38 mWell-maintained lathe from the maintenance department.Working range:Swing diameter over bed 570 mmSwing diameter over cross slide 365 mmSwing diameter in bed recess 600 mmLength of bed recess in front of main spindle 160 mmTurning length 3000 mmCenter height over flat surface 280 mmBed width 360 mmMaximum workpiece weight without steady rest 500 kgMaximum workpiece weight with steady rest 630 kgMain spindle speeds 11.2 - 2240 rpmDrive power 15 kWFeeds60 longitudinal feeds/revolution 0.063 - 56 mm60 cross feeds/revolution 0.0315 - 28 mmTapping60 thread pitches 0.25 - 224 mm60 thread counts 112 - 0.125 TPITravelsCross slide 345 mmTop slide 125 mmTailstock quill 190 mmMain spindleSpindle he ...

OKUMA LB15 – CNC Lathe Highlights • Model OKUMA LB15 • Tool turret with 12 tool positions Technical data • Turning length max.: approx. 500 mm • Turning diameter max.: approx. 250 mm • Tool positions: 12 • Machine dimensions: approx. 2600 x 3600 x 1800 mm • Machine weight: approx. 5000 kg • Nominal voltage: 380 V • Phases: 3 • Frequency: 50 Hz • Power consumption max.: 21 kVA Equipment • Tool turret • CNC control • Protective cladding • Chip conveyor Note • Loading must be carried out by the buyer Auction-ID: A7-45863-2

turning diameter: 760 mmturning length: 1540 mmcontrol: Fanuc 31i-B dimensions of machine: 5500 x 2700 x 3110 mmchip conveyor: 6900 x 2400 mmtotal power requirement: 94,42 kWweight of the machine ca.: 15,5 tdimensions of the machine ca.: mTurning center with infinitely variable swiveling milling head and Y-axis, motorized lower turret and subspindle.Condition: Very well preserved, machine comes from a company liquidation.Time recording:Control unit on: 13127 hoursRuntime: 3833 hoursProcessing time: 2835 hoursThe upper head is fed by a tool magazine and can turn or mill at various angles. Even highly complex components can be completely machined without further repositioning.Fanuc 31i-B CNC controlSwing diameter over bed: 1000 mmMaximum turning diameter: 760 mmMaximum turning length: 1540 mmMaximum bar diameter (manual/continuous): 76/76 mmY-axis travel: 230 mm (±115 mm)Clamp (counter s ...

S/N:500576 Year of manufacture: 2005 Control system: Siemens Sinumerik 840Maximum turning length: 710 mmSwing diameter: up to Ø 590 mmBar capacity (main/counter spindle): Ø 90 mm Number of spindles: 2 (main and counter spindle)Spindle power: 28kWC-axis resolution: 0.001°Axis & Turret ConfigurationNumber of turrets: 2 Stations per turret: 12 Axis travel (approximate): X-axis: 140 mm Y-axis: 180mm Z-axis: 710 mm Rapid traverse rates: 20 m/minDriven Tools (Live Tooling): Available on both turretsMaximum speed: 6,000 rpmPower per driven tool: approx. 6–9.4 kWRated voltage: 400 V ACRated current: 123 ANominal power: 72 kWPhases: 3Frequency: 50 HzDimensions & WeightFootprint (L × W): approx. 5,300–5,900 mm × 2,150 mmHeight: approx..2,300 mmMachine weight: approx. 7,800–9,000 kgChip conveyor   Auction-ID: A7-45794-3

turning diameter: 320 mmturning length: 500 mmcontrol: Fanuc Oi-TD total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mFanuc Oi-TD cnc controlcollet chuck device10-fold revolvertail stockchip conveyorTechnische Daten: / technical detailsmax. Drehdurchmesser / max. turning diameter 320 mmmax. Drehlänge / max. turning length 500 mmX-Weg / X-travel 180 mmZ-Weg / Z-travel 520 mmmax. Drehzahl / max. spindle speed 6000 UpM /rpmAnzahl der Revolverplätze / number of tool places 10 Gewicht ca. / weight ca. 3200 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1790 mmturning diameter over slide rest: 1250 mmturning length: 5000 mmfaceplate: 1250 mmworkpiece weight: 4500 kgcontrol: Siemens type: System 8 T mmturning speeds: 1,1-300 U/minsteady: mmsteady: mmtotal power requirement: 72 kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this  ...

turning diameter over bed: 1250 mmturning diameter over slide rest: 900 mmturning length: 5000 mmfaceplate: 1250 mmworkpiece weight in steadies max.: 20000 kgsteady: mmsteady: mmworkpiece weight: 16000 kgtotal power requirement: kWweight of the machine ca.: 22 tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with Mo ...

faceplate diameter: 2500 mmmax. swing diameter over bed: 2700 mmturning height: 2500 mmControl: Siemens 840D CNC workpiece weight max.: 30 tworkpiece dia.: 2500 mmCrossbar travel distance every 100 mm: 1200 mmPiston rod: 1500 mmram diameter: 250 x 250 mmtraversing speed: 8 m/minMax. vertical feed rate: 6000 mm/minMax. cross feed: 8000 mm/minSpeed of the machine table: 180 U/mintool changing time: 1 mincutting speed: 140 m/minCutting depth: 14 mmPower Capacity of main drive: 100 kWweight of the machine ca.: 47 tdimensions of the machine ca.: 12,5 x 8,0 x 6,7 mFeatures/Accessories: - Crossbars every 100 mm, including locking mechanism- 2 ram units with a cross-section of 250 x 250 mm, travel distance 1500 mm- Both ram units can be moved through the center (100 mm each, i.e., both ball screws are offset from each other with collision protection- ZF gearbox for main drive: AC 100 kW / S1 Sie ...

swing diameter: 2000 mmturning height: 1800 mmControl: Siemens Sinumerik 840 Dsl turning speeds range: 2,8-315 U/mincross rail adjustment - vertical: 1200 mmcross rail adjustment - horizontal: +/- 1150 mm: 1500 mmbit feeder section: 240 x 240 mmMinimum immersion diameter: 340 mmcutting capacity: 50 kNmax. torque on the faceplate: 50000 Nmspeed range step 1: 2,8 - 80 U/minspeed range step 2: 12 - 315 U/minMax. clamping weight: 12000 Kgpower capacity faceplate: 105 kWweight of the machine ca.: 33 tdimensions of the machine ca.: 10 x 5 x 6,5 mFurther technical data: - Feed range of three-phase servo motors: 1–3000 mm/min, 0.01–50 mm/rev - Crossbeam travel speed: 425 mm/minFeatures/Accessories - Increased turning height (+600 mm) - Z-axis extended to 1500 mm - Magazine capacity: 20 positions - Magazine type: disc magazine - Max. tool length: 525 mm - Chip conveyo ...

Working space: Max. swing diameter: 300 mm Max. turning diameter: 160 mm Max. turning length: 250 mm Main spindle: Speed range: 60 – 6,000 rpm Main drive power: 5.5 KW Spindle nose: A2 – 5 inches Spindle bore: 50 mm Bar work up to a diameter of max. 40 mm Tool turret: Special version: 12-speed Travels: Turret travel: x – axis: 100 mm z – axis: 290 mm Travel speed: Rapid traverse: x/z – axis: 30 m/min Feed range: 0 – 5,000 mm/min Tailstock: Tailstock travel: 364 mm Quill tip: MK 4 Quill stroke: 75 mm Auction-ID: A7-45768-100

x-travel 185 mm z-travel 360 mm b-way 460 mm Control Mazatrol 640 T Swing diameter max. 550 mm Turning diameter max. 280 mm Workpiece weight max. 200 kg Bar passage 51 mm Main spindle speed 35-6000 rpm Milling spindle speed range 25-4500 rpm Rapid traverse in X and Z direction 30/33 m/min Rapid traverse B axis 30 m/min Tool turret 12 places Capacity: Chuck Size: 6 inches Swing diameter max.: 550 mm Standard turning diameter: 221 mm Turning diameter max.: 280 mm Bar passage max.: 51 mm Distance between spindle nose and turret edge: 80-535 mm Main spindle: Speed: 35-6000 rpm Spindle bore: 61 mm Sub-spindle: Speed: 35-6000 rpm Spindle bore: 52 mm Revolver: Number of tools: 12 pieces Tool size: External turning chisel: 20 mm Internal lathe chisel: 32 mm Milling drill: 16 mm Milling tap: M12 End mill: 16 mm Milling spindle speed: 25-4500 rpm Equipment/access ...

Working space: Max. swing diameter: 300 mm Max. turning diameter: 160 mm Max. turning length: 250 mm Main spindle: Speed range: 60 – 6,000 rpm Main drive power: 5.5 KW Spindle nose: A2 – 5 inches Spindle bore: 50 mm Bar work up to a diameter of max. 40 mm Tool turret: Special version: 12-speed Travels: Turret travel: x – axis: 100 mm z – axis: 290 mm Travel speed: Rapid traverse: x/z – axis: 30 m/min Feed range: 0 – 5,000 mm/min Tailstock: Tailstock travel: 364 mm Quill tip: MK 4 Quill stroke: 75 mm Auction-ID: A7-45768-10