máquinas de processamento de carne e peixe usadas para venda (1,831)

MEMBRANE SKINNER, MAJA, TYPE: EVM 3006 Technical description: Serial number: 42728 Power: 0,75 Kw, 380 V, 50 Hz Working widht: 545 mm Dimensions: 1000 x 600 x 1050 mm This machine has only been designed for use in the meat processing industry. The EVM 3006 type is a membrane skinning machine used to open and manually remove the membrane and skin from pieces of fish, pork, beef, poultry, veal, game and horse. Only round and flat products may be processed on open membrane skinning machines (e.g. knuckle joints or thighs)

CONTINUE GLAZING MACHINE Technical description: Power supply: 380/440 V - 50/60Hz Bandwidht: 530 mm Approximate coil lenght:? 22 mts (installed on the side of the tank) Water recirculation: Moto-pump with filter

MEMBRANE SKINNERTOWNSEND, MODEL: 1520 Technical description: Serial number: 140 Year: 1998 Working width: 380 mm Power supply: 220-240 V/50-60 Hz Dimensions: 700 x 530 x 990 mm

LUTETIA VACUUM TUMBLER, TYPE: 4 Technical description: SERIAL NUMBER: 16004 Power supply: 400 V, 60 Hz CAPACITY: 1800 liter, WEIGHT: 1400 kg, WITH LUTETIA STEAM GENERATOR: type: 24 kW, serial number: 12773, year of construction: 2014, capacity: 23 liter, DIMENSIONS: 3800 mm x 2000 mm x 2050 mm. (Including Busch vacuum pump on mobile s/s frame, dimensions: 830 mm x 510 mm x 640 mm)

VACUUM MASSAGER LUTETIA TYPE 1, WITH BUSCH PUMP TYPE:100-136 Technical description: Drum diameter: ?1000 mm Capacity: 500 liter Vacuum: 2 mbar Busch pump type: 100- 136 (Serial number:176722) Pump dimensions: 700 x 400 x 450 mm Machine dimensions: 2400 x 1300 x 1800 mm

FILLETING MACHINE BAADER 35 (SINGLE OR BUTTERFLY FILLET) FOR HERRING (20-40 CM), MACKEREL (24-40 CM), BLUE WITHING (22-40 CM) AND OTHER PELAGICS Technical description: Machine number: 10-1363-0035 Throughput rate: 100-200 pieces/min Voltage/Power: 380 V, 3 Ph, 50 Hz, 11 A Dimensions: 3950 x 2600 x 1550 mm Weight: 835 Kg The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482 or 484. A skinning machine BAADER 55 can be at ...

AUTOMATIC FEEDER FOR HERRING, SARDINE, BAADER 478 The usefull capacity of the BAADER 36 and 134 herring filleting machine can be increased by a combination with the BAADER 478 automatic feeder wich aligns herring, sprats, sardines and similar fish and feeds them to the processing machine. A variable-speed elevator raises the fish from a water filled hopper and delivers them uniformly to five feed channels. Fish traveling head forward are led directly to the timing device. Fish with tail leading are turned around. The timing device releases single fish synchronized wuth the processing machine and transports them through a back and belly aligning device into the feed troughs of the processing machine. It can be combined with Filleting machine for herring, sardine, Baader 134

BOWL CUTTER WITH EMPTIER MEISSNER, TYPE: COM-120 Technical description: Serial number: 718810 Material: Stainless steel Aisi-304 Power supply: 380-440V/50-60 Hz Bowl capacity: 120 lt Dimensions: 2100 x 1450 x 1570 mm

HEADING MACHINE, BAADER 421 Technical description: Machine number: 10-4604-0421 Belt width: 300 mm Lift height: 1050 mm Estimated throughput: 35 fishes/min but varying in accordance with fish size and stillness of the operator Water consumption: 12 l/min Weight: 520 kg Dimensions: 2350 x 1600 x 1750 mm

EEL GUTTING MACHINE, BAADER TYPE: 143 Technical description: Serial number: 10-3404-0143 Power supply: 220-380 V, 3 Ph, 50 Hz, 6.5 A, 2.5 kW Clearance: 125 x 110 mm Dimensions: 3000 x 1000 x 1250 mm The BAADER 143 guts eel from 130 to 1200 g, the gutting cut is performed in the usual way. The belly cavity is cleaned by scaper, a suction scoop and a rotating brush, the machine can be adjusted for 3 size ranges. Eel support troughs, scrapers and scoops for the different size ranges can easily be exchanged.

AUTOMATIC PROCESS MACHINE FOR LIQUIDS FOODS, KARL SCHNELL TIPO: 250 Technical description: Machine number: 25162 Year: 2001 Two knives Nominal volume: 300L Dimensions: 1500 x 1150 x 2350 mm QUALITY HAS A NAME Customers demand equipment that meets their individual requirements and they demand machines that produce a high quality end-product at lowest possible costs. Combining these fundamental considerations with technical know-how, KS builds machines that are simple to use and extremely durable. Main application field of the B 22 is the production of low to middle viscous emulsions and suspensions. Typical applications are the production of: Soup, sauce and gravy Ketchup aund mayonnaise Fish farce Injection brine Pate and tureen As well as The reconditioning of rework The preparation of process materials, such as additives and spices for the sausage-, petfood- and processed cheese p ...

CEPHALOPOD CUTTER WITH POSITIONING BAND, MECALSA TYPE: MC CTDP/CH200 Technical description: Material: Stainless steel Voltage: 380/440 V Frequency: 50/60 Hz Cutting pitch between blades: 40 mm

BAADER SKINNING MACHINE FOR FISH, TYPE 47. ID 2279 Technical description: Machine number: 10-2211-0047 Working width: 205mm Belt width: 195mm Total dimensions: 2200mm x 900mm x 1200mm

SKINNER- DERINDER, GRASSELLI TYPE: N520 Technical description: Material: Stainless steel Working widht: 470 mm Power supply: 380/440 V - 50/60Hz Dimensions: 2300 x 850 x 1720 mm

VACUUM MASSAGER, INJECT STAR TYPE: MAGNUM 2600 Technical description: Serial number: 3730 Capacity: 2600 l Power supply: 380-440V/50-60 Hz, 3ph Power: 7 Kw Tumbler dimensions: 1300 x 2450 mm Dimensions: 3270 x 1850 x 1900 mm With this machine you are in a position to massage meat at any time, fully automatically and at maximum, so that the general appearance and flavour is improved, as well as the structural loosening up of the meat and the essential assimilation of both the natural juices and injected brine, by binding in, is achieved. HOMOGENEOUS BRINE DISTRIBUTION Sealing-in of Protein: The binding of the surface cells, seals off the inner moisture and prevents drying out. Optimum Protein-Water-Ratio: Whether you massage ham, shoulder, loin, tongue, belly, brisket or rough and fine fillings for cooked, boiled, raw and preserved sausage, whole chickens or chicken parts, fish or othe ...

FILLETING MACHINE BAADER TPYE: 184 Technical description: Machine number: 10.3320 0184 Power supply: 380 V, 3 Ph, 50 Hz, 11.5 kW, 22.0 A Plastic conveyor belt width: 500 mm Band width: (2x) 160 mm Throughput: 24-40 pieces/min Water consumption: 25 l/min Weight: 2.500 kg Dimensions: 5400 x 1300 x 1450 mm This machine is laid out for filleting gutted and headed cod, haddock, saithe, hake, merluza and withing from 30 to 70 cm in total lenght (=0.3 to 2.5 kg, gutted including head). Proven BAADER filleting system providing for highest yield and reliability. The BAADER 184 is equipped with an integrated skinning device.

GUTTING MACHINE FOR HERRING, BALTIC HERRING, SARDINES, MACKEREL AND WHITEFISH ARENCO MODEL: CIS Technical description: Power supply: 380-440 V ? 50-60Hz Conveyor width: 260 mm Dimensions: 3600 x 900 x 1330 mm

VACUUM STUFFER, VEMAG ROBBY 2, TYPE: 135 Technical description: Serial number: 135.0243 Filling capacity: depending on the feeding element up to 3000 Kg/h Portioning speed: up to 650 portions/min (depending on product, casing and portion size) Power supply: (220-240 V, 27-35 A)-(380-460 V, 15-20 A) 3 Ph, 50/60 Hz Dimensions: 1000 x 900 x 2020 mm

TROUT GUTTING MACHINE BAADER, TIPO: 140 Technical description: Serial number: 74-9019-0140 Power supply: 380 V, 3 Ph, 50 Hz, 7 A Dimensions: 3050 x 550 x 1240 mm This machine is laid out for gutting trouts of a live weight from 240 to 650 g in a commercial manner. The abdominal cavity is cleanly cut open and the guts including the kidney are completely removed by means of a vacuum suction device. The special design of the BAADER 140 is capable of gutting up to 38 fish/min. The gills can either be removed or retained; this requires an easy adaption.

MEMBRANE SKINNER, MAJA, MODEL: EVM 2000 Technical description: Serial number: 38280 Power supply: 380 V, 3 Ph, 50 Hz, 2.2 A, 0.75 kW Working widht: 420 mm Dimensions: 700 X 700 X 1000 mm

CAN SEAMER, SOMME MODEL: 434 Technical description: ? oval format Dimensions: 2500 ? 2200 ? 1900 mm

FORMING, GLUING AND BREADING LINE, KOPPENS + MULTIFORCE CONTRACT LIMITED Technical description: Forming machine Koppens, type: VM 400-HS Dimensions: 2100 x 800 x 2080 mm Gluing machine Koppens, type: ER 400 Dimensions: 1435 x 815 x 1620 mm Breading machine Koppens, type: PR 400 Dimensions: 2470 x 670 x 2050 mm Gluing machine Mutliforce Contract Limited Dimensions: 1100 x 600 x 1670 mm

VACUUM MASSAGER, INJECT STAR TYPE: MAGNUM 2600 Technical description: Serial number: 559 Capacity: 2600 l Power supply: 380-440V/50-60 Hz, 3ph Power: 7 Kw Drum size: 1300 x 2450 mm Dimensions: 3200 x 1500 x 1950 mm

ROTARY MASSAGER INJECT STAR, MODEL: HS-7 Technical description: Bowl size: 650 x 600 mm Power supply: 380-440V/50-60 Hz Dimensions: 850 x 800 x 1200 mm

BOWL CUTTER, TVALL TYPE: CRI-50AC Technical description: Serial number: 9.089.403 Speeds: 2 Bowl capacity: 50 Lt Power supply: 380-440V/50-60 Hz Dimensions: 1300 x 1000 x 1350 mm

SKINNER- DERINDER, GRASSELLI Technical description: Material: Stainless steel Working widht: 700 mm Power supply: 380/440 V - 50/60Hz Dimensions: 2300 x 1100 x 1400 mm

JAR SEAMER, SOMME MODEL: DIANA 383, ROUND FORMAT Technical description: Format: ? 83,7 mm No. of heads: 8 Power supply: 380-440V/50-60 Hz Dimensions: 3600 x 1600 x 2000 mm

GRADING - WEIGHINF MACHINE MAREL, TYPE: A320 Technical description: Number of stations: 8 Feeding conveyor: 4300 x 1005 x 1970 mm, working width: 450 mm Weighing conveyor: 1900 x 750 x 1640 mm, working width: 300 mm Grading conveyor: 6200 x 1500 x 1550 mm, working width: 385 mm

SEPARATOR, SEPAMATIC- type: SEPA-410 Technical description: Serial number: 107315 Power supply: 2,2 Kw, 400 V, 50 Hz, 6 A Includes 1 drum (to choose between different perforation diameters: 1,75mm; 2mm; 3mm; 5mm). Dimensions: 900 x 1100 x 1600 mm

SEPARATOR BAADER 696 Technical description: Drum diameter 200mm Includes 1 drum (to choose between different perforation diameters: 1,75mm; 2mm; 3mm; 5mm).