serras usadas para venda

Carriage length: 3800 mm; Cutting width at the width stop: 1000 mm; Cutting width at cut-to-length fence: 2800 mm; Cut depth: Scorer: no; Height adjustment saw blade: manual / hydraulic; Swivel adjustment saw blade: manual / hydraulic; Width stop adjustment: manual; Display Saw Blade Angle: Scala; Display cutting height: -; Display width stop: Scala; Display cutting ruler: Scala; Saw blade diameter: Speeds: 4; Motor power: 5.5 kW; Engine brake: yes; Extraction connection: 80 mm and 120 mm; Machine length: 3870 mm; Machine width: 1700 mm; Weight:

Carriage length: 3800 mm; Cutting width at the width stop: 600 mm; Cutting width at cut-to-length fence: 2800 mm; Cut depth: Vorritzer: yes; Height adjustment saw blade: manual / hydraulic; Swivel adjustment saw blade: manual / hydraulic; Width stop adjustment: manual; Display Saw Blade Angle: Scala; Display cutting height: -; Display width stop: Scala; Display cutting ruler: Scala; Saw blade diameter: Speeds: 4; Motor power: 7.5 kW; Engine brake: yes; Extraction connection: 80 mm and 120 mm; Machine length: 3870 mm; Machine width: 1200 mm; Weight: 1000kg;

Sawblade tiltable: 45 °cutting width: 1.100 mmMotor output: 3 kWCutting height: 125 mmSaw blade diameter: 350 mmSpeed: 4.500 U/min.table-size: 800 x 710 mmCutting height at 45°: ca. 88 mm: manuell Weight: ca. 560 kg: Nein : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Very well maintained canters Quadro group Super 40 by Söderhamns/LFS. Indent with centering type MTG with chipping 240/12 Söderhamns, ventilation with 7 centring rollers and 4 x band saw AKE type Super 40 with roll diameter 1,400 mm. All linear axes with new servo cylinders type NOBEL. Machine until December 2016 in use. Super opportunity! Machines in very clean condition!

Used Band Saw Manufacturer: HEMA Type UH 630 YOC 1990 Roll diameter 630 mm Cutting height 570 mm Cutting width 610 mm Motor power 1.5/2.2 kW 2 speeds Belt length 4,950 mm Table swivel by handwheel Scale and Zero Lock Transport height with pallet approx. 2.50 m Weight approx. 380 kg With large Pos. saw blades Rriy9e2lqn With brake & instructions Item location: 59425 Unna The machine can be viewed under power. A forklift for loading is available. Prior sale is reserved. It is possible to professionally examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition, is non-binding and has been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The goods are sold from the location / w ...

Dear customers currently we offer you a used tape saw with sliding table of the brand HEMA. Here are the technical data of the machine: Roll diameter: 700mm Cutting height: 650mm Cutting width: 680mm Cutting width between stop and saw blade: approx. 630mm Power: 3 kW Sliding table that can be moved on both sides left half of the table: 650mm right half of the table: 1.400mm Table length: 1.800mm Sliding travel: 1.500mm Particularities: Infinitely variable speed control for cutting speeds and automatic table feed are unfortunately not possible due to the lack of PLC control unit. However, the saw can be used completely manually. Price plus VAT, which will be shown separately on the invoice. Shipping possible for an extra charge! If you have any questions, please do not hesitate to contact us.

This machine was specially to the grooves and separation of Built in the front of the drawer. On these machines panels can generally be tongued and divided.  ... mais informação

Glue binder cross saw Width 3200 mm (saw path) Saw blade diameter 900x50 Little worked !  ... mais informação

Cross-cut saw for strong wood, glue binder, cantilevered wood... Work path approx. 3m , Cutting height approx. 45 cm Circular saw blade 900x50 good condition little worked!  ... mais informação

Cross-cut saw for strong wood, glue binder, cantilevered wood... Work path approx. 3m , Cutting height approx. 45 cm Circular saw blade 900x50 good condition little worked!  ... mais informação

Cross-cut saw for strong wood, glue binder, cantilevered wood... Work path approx. 3m , Cutting height approx. 45 cm Circular saw blade 900x50 good condition little worked!  ... mais informação

RANDEK SP700 Cross-cut saw Production: Randek, Sweden Year of construction: 1990 in good condition Randek's SP700 series is a reliable saw designed for manufacturers of roof trusses. Manufacturer of roof trusses and houses all over the world. The SP700 saw is effective, easy to use and accurate. She has been on the market for a long time. has been on the market for a long time and is constantly in close contact with our customers many customers. The saw blade of this semi-automatic saw supports oblique cuts, that is, it can make all the cuts you need. The large saw blade diameter (700 mm) also allows you to make several sections of woodpiles to cut at the same time. - Bevel cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cutting cycle - PLC programmable saw - Fixation of the wood near the cutting area for a precise cut Roller conve ...

White IDEAL 2H/2 Pk track width: 900 mm height of track to run 400 mmfully hydraulic, with KABINE and control panel, auxiliary trolley electric, very good  ... mais informação

Used sliding table saw Manufacturer: SCM Type SI 12 SW Carriage length 1,500 mm max. saw blade 300 mm max. cutting height 100 mm Year of manufacture 1991 Weight approx. 430 kg Item location: 59425 Unna The machine can be viewed under power. A forklift for loading is available. Prior sale is reserved. It is possible to professionally examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition, is non-binding and has been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The goods are sold from the location / warehouse, with a transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is only aimed at traders, trad ...

Double shaft multisaw A. COSTA PUMA 2/60 350/160 - Italian production - year of production 1991 cutting width 350 mm cutting height 160 mm 45 and 45 kW engines 3 kW feed motor 1.1 kW height adjustment motor disc diameter max. 300 mm spindle diameter 2 x 60 mm sleeve diameter 2 x 80 mm track width 350 mm total power of 94 kW feed adjustment on the inverter automatic central lubrication minimum length of the element 600 mm electric height adjustment electric shaft height adjustment four upper pressure rollers pneumatic clamps five anti-ejection pawls shaft position indicator stub diameter 2 x 220 mm spindle speed 4500 RPM dimensions of the machine (length / width / height) 240/235/210 cm weight ~ 6000 kg

– Italian production – year of manufacture 1991 TECHNICAL PARAMETERS: cutting width 350 mm cutting height 160 mm 45 and 45 kW engines feed motor 3 kW height adjustment motor 1,1 kW disc diameter max. 300 mm spindle diameter 2 x 60 mm sleeve diameter 2 x 80 mm track width 350 mm total power 94 kW feed adjustment on the inverter automatic central lubrication minimum element length 600 mm electric height adjustment electric shaft height adjustment four upper pressure rollers pneumatic clamps five anti-ejection latches shaft position indicator connection diameter 2 x 220 mm spindle speed 4500 RPM dimensions of the machine (L/W/H) 240 / 235 / 210 cm weight ~ 6000 kg

Remotely controlled clamping car from the right! Remote-backed tensioner IDEAL 2 H/2-Pk auxiliary car HW 4/3- Pk 1x left and 1x right in stock ; Werkstaettengeprueft  ... mais informação

TECHNICAL DATA: Length of sliding table mm: 1600 Saw blade diameter max mm: 350 Cutting height max mm: 110 Cutting width max mm: 1270 saw blade tilting: 0-45° Scoring aggregate: Yes Milling Unit Spindle motion mm: 220 Rotation speed max rpm: 8.000 Motor power KW: 11,5 Weight Kg: 1150

Description: • Cut off saw • Serial number 92AQ3 • Saw blade diameter 700 mm • Motor power 11 KW • Maximum cutting width approx. 600 mm • Maximum passage height approx. 180 mm • Table size 330 x 700 mm • Driven roller input conveyor with useful dimensions 4050 x 630 mm, chain transmission • Driven roller input conveyor with useful dimensions 4200 x 630 mm, 4 pneumatic stops, chain transmission • Transport dimensions 5000 x 2400 x 1600 mmApprox. Onsite Dimension. (l x w x h): 8,830 x 1,480 x 1,550 mm, weight approx.: 2,500 kg

fully automatic cross-cut system with additional barcode recognition LUT system for error cutting Inlet conveyor 6 m 6 ejection stations  ... mais informação